2018 Jeep Wrangler

1 - rear door opened while driving, door was checked closed before driving on 7/14/26, it is available for inspection 2 - safety for others were at risk, as some of contents exited vehicle on road 3 - have an appointment on 7/21/26 with original cr dealer 4 - waiting on car dealer to inspect it 5 - no warning lights or messages, first apppeared on 7/14/26

Reported

Jul 2026

Incident date

Jul 2026

Mileage

Not provided

Outcome flags

None reported

I purchased this 2018 Jeep Wrangler JK Unlimited on July 19, 2025. Since purchasing the vehicle, I have experienced repeated mechanical failures that have required multiple repairs. The most serious issue involves the engine overheating at highway speeds without any visible coolant leak or clearly identifiable cause.Despite seeking professional diagnosis, the source of the overheating could not be determined. Shortly afterward, the vehicle developed a P0302 (Cylinder 2 Misfire), raising concerns about possible internal engine damage caused by the overheating.I believe this presents a significant safety hazard. An engine that overheats unexpectedly while driving at highway speeds can lose power or fail without warning, creating a dangerous situation for the driver and surrounding traffic. The vehicle has become unreliable and unsafe to operate because I cannot predict when it may overheat or experience another engine failure.As someone who often drives alone, I no longer feel safe taking this vehicle on long trips. I am concerned that the vehicle could leave me stranded on a highway or in a remote location without warning, placing my personal safety at risk. A vehicle should provide dependable transportation, not expose its occupants to the possibility of sudden mechanical failure.This vehicle has spent more time in repair facilities than on the road. I have incurred thousands of dollars in repair expenses, and I am now being asked to pay for an engine teardown simply to determine the cause of the failure before any warranty consideration can be made. Despite multiple repair attempts, the underlying cause of the overheating and engine problems has not been resolved.I am submitting this complaint because I believe the repeated overheating, unexplained engine malfunction, and resulting cylinder misfire may indicate a safety-related defect that warrants investigation. I request that the review to determine whether similar failure whether a broader safety issu

Reported

Jul 2026

Incident date

Mar 2026

Mileage

Not provided

Outcome flags

None reported

The instrument cluster display in my 2018 Jeep Wrangler Sahara has failed. The display is either blank or nonfunctional, preventing me from viewing critical vehicle information and safety warnings while driving. This failure affects my ability to monitor engine temperature, fuel tank capacity, warning messages, fault indicators, and other important vehicle operating information. As a result, I may not be alerted to potentially dangerous conditions such as engine overheating, low oil pressure, charging system failures, or other safety-related issues. I am aware that Jeep has issued recalls involving instrument cluster defects on certain Wrangler vehicles, but my VIN is not included in the recall. The symptoms of my vehicle appear similar to those reported in recalled vehicles. Because the instrument cluster is a primary safety component used to communicate vehicle warnings and operating conditions to the driver, I believe this defect presents a safety risk. I am submitting this complaint so the issue can be investigated and to determine whether additional vehicles should be covered.

Reported

Jul 2026

Incident date

Nov 2025

Mileage

Not provided

Outcome flags

None reported

The contact owns a 2018 Jeep Wrangler. The contact stated that upon starting the vehicle the instrument panel would not illuminate, due to the failure, no warning lights were illuminated. The vehicle was taken to a local dealer where the vehicle was diagnosed and the contact was advised that the instrument panel was faulty and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure and offered no assistance as the vin was not allocated to a recall. The failure mileage was 50,000.

Reported

Jul 2026

Incident date

Feb 2026

Mileage

Not provided

Outcome flags

None reported

The contact owns a 2018 Jeep Wrangler JK. The contact stated that the ABS warning light was illuminated. While driving, the vehicle experienced a loss of traction, a pulsating or pumping sensation in the brake pedal, and skidded easily upon heavy brake application. The contact associated the failure with NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, Jeep models were not included in the recall parameters. The vehicle was taken to a dealer, where it was diagnosed with electronic control unit (ECU), electronic stability control (ESC), traction control, and ABS failures. The vehicle was not repaired because the parts were on backorder. The manufacturer was notified of the failure. The failure mileage was 42,000.

Reported

Jul 2026

Incident date

Jul 2026

Mileage

Not provided

Outcome flags

None reported

The contact owns a 2018 Jeep Wrangler. The contact stated that while driving 20 miles away after an hour, the vehicle lost power steering and power braking functionality, and the transmission unexpectedly downshifted to a lower gear. The vehicle was turned off. The check engine warning light was illuminated. The vehicle was towed to the residence. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 91,300.

Reported

Jun 2026

Incident date

Jun 2026

Mileage

Not provided

Outcome flags

None reported

EGR pre conditions to pass CA state smog emissions test will not clear. Have changed entire EGR system and have drive the recommended Chrysler Drive cycle for my car with hundreds of miles on it since replacing battery with no luck. All other system checks clear.

Reported

Jun 2026

Incident date

Jun 2026

Mileage

Not provided

Outcome flags

None reported

What component or system failed or malfunctioned, and is it available for inspection upon request? Jeep started on fire and is still at a tow yard in Belchertown, MA How was your safety or the safety of others put at risk? The Jeep started on fire while I was driving. I pulled over as the engine was smoking and then it burst into flames while I was still inside. Has the problem been reproduced or confirmed by a dealer or independent service center? Not that I know of. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? Yes, we gave permission for our insurance agency and Jeep to inspect the burned out vehicle. Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? While I was driving, the engine temp and coolant warning lights shot way up and then the engine began to smoke. I pulled over and before I could exit the vehicle, fire was coming into the cab through the air vents.

Reported

Jun 2026

Incident date

Jun 2026

Mileage

Not provided

Outcome flags

Fire

Any time I am over the speed of about 55 mph, and hit any type of bump, the steering wheel starts to shake violently. I have to slow down to about 40 mph to make it stop. I almost got rearended by an 18-wheeler yesterday on the interstate.

Reported

Jun 2026

Incident date

Jun 2026

Mileage

Not provided

Outcome flags

None reported

The contact owns a 2018 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the steering wheel seized and the vehicle failed to accelerate. The electronic parking brake, check engine, and several other unknown warning lights were illuminated. The contact shifted to park (P) and then drive (D) and was able to continue driving. The vehicle was taken to the dealer, who was unable to duplicate the failure. The vehicle was taken to an independent mechanic, who determined that coolant had leaked into the computer and damaged the battery pack control module. The mechanic related the failure to Customer Satisfaction Program: Y40 (Control Module Software Updates); however, the VIN was not included. The vehicle was then towed to an unknown dealer; however, the vehicle was not yet diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 100,000.

Reported

Jun 2026

Incident date

Dec 2025

Mileage

Not provided

Outcome flags

None reported

I own a 2018 Jeep Wrangler that my 19 year old son drives for college. While driving, the vehicle jerked and became sluggish. There were no warning lights illuminated. I became aware that the front brake rotors had overheated again. I had the front right brake caliber and brake line changed back in 2024 and the issue has recurred this year. I had a local mechanic change the front brake pads and rotors for both front tires and caliber to right front side only in April/2026 and the issue has started again today. The vehicle was taken back to local mechanic to be diagnosed again. He stated that the brake fluid was unable to properly bleed through the brake line restricting air to fully purge from the hydraulic system, which can result in incomplete bleeding, reduced braking performance, uneven pad wear, brake drag, or brake fade and is part of the reason for burning smell near right front tire. He added that car isn’t safe to drive in this condition due to safety concerns of accidents due to inability to properly brake or even a fire. Vehicle hasn’t been repaired due to cost and I will attempt to contact manufacturer. The initial mileage reading when this issue occurred in 2024 was 90,000 miles. The mileage as of this complaint is 112,392.

Reported

Jun 2026

Incident date

Jun 2026

Mileage

Not provided

Outcome flags

None reported

My electronic instrument panel went completely out. I could not tell my speed, amount of gas, mileage, or anything else. This happened suddenly and without any warning.

Reported

May 2026

Incident date

May 2026

Mileage

Not provided

Outcome flags

None reported

I had the clutch plate recall done on my 2018 jeep wrangler unlimited 3.6 in January 2024. The first 8 months my dash lite up warning me my clutch is overheating and to reduce clutch use. This happens every time im on traffic or reversing around obstacles going up hill. The dash also lite up saying clutch performance is limited reduce clutch use. This is still happening after the recall was completed and its May 2026 currently trying to get it fixed. I have pictures of the dash lighting up with 3 different warning about the clutch plate

Reported

May 2026

Incident date

Aug 2024

Mileage

Not provided

Outcome flags

None reported

Was stopping at red light. Got to about 5mph when Jeep accelerated to about 35mph. I was standing on the breaks but the Jeep kept accelerating until impact struck the car in front me which was stopped. I have video.

Reported

May 2026

Incident date

May 2026

Mileage

Not provided

Outcome flags

Crash

Defect in the instrument panel cluster (IPC) that can cause it to go blank or fail entirely. Screen is completely blank which makes it impossible to monitor or see any warnings for vehicle with it being an electrical dash. There is a safety recall on 2018-2024 Wranglers, but for some reason my VIN does not populate on the recall when I have a 2018 Wrangler. This has caused me not to be monitor oil life, fuel, and see check engine notifications. NHTSA Recall Number: 24V‑652 for year model 2018–2024 Wranglers (and 2020–2024 Gladiators)

Reported

May 2026

Incident date

Mar 2026

Mileage

Not provided

Outcome flags

None reported

I bought this vehicle used in 2022 from CarMax. According to Jeep (Stellantis) Co. multiple recalls were fixed by the previous owner, but the patch available for 2018 Jeep Wranglers was not done. In 2024 my iphone and Mac laptop were hacked and shortly after I began having problems with my 2018 Jeep Wrangler. My alarm system started going off while I was in my home without touching or being near the FOB. When I used my FOB to unlock the doors, they would lock back before I could open the door. I was unable to use the push button start for a few minutes up to 15 minutes and in 2025 I was unable to use the push button at all on most days. I had to research a work around to be able to start my Jeep and even after that depending on the day, it takes several seconds to minutes to start it this way. On 2 different occasions as I was driving, I had no control over my steering for approx. 10 seconds. I held on to the wheel and slowed down. The control returned and I was able to drive home. I researched and found out that 2014-2018 had reports of hacking and the hacker taking control of the vehicle in multiple ways including steering, brakes, alarm system, and hacking FOB. My radio has been turned off and the stations changed. One of my FOBs was tampered with, including switching the lock and unlock button's capability, panic button was disabled, and now the FOB does not work at all. There is a loud grinding noise behind my glove box that can be heard at different times including when Jeep is turned off. Loud noises that sound like a rock hitting the window happen randomly to my front windshield, driver and passenger windows happens multiple times while I am driving and when vehicle is turned off. I took Jeep to a trusted mechanic and was told there was no way to tell and it would be better to just sell it. After I moved, I didn't experience these problems for a while, but am experiencing them again. I am concerned for my safety and anyone who may be a passenger in my Jeep.

Reported

May 2026

Incident date

Feb 2025

Mileage

Not provided

Outcome flags

None reported

Engine - The vehicle is available but the engine was replaced. I was able to get home however there was a potential for significant engine failure. Yes it was inspected by an independent service center. Yes it was inspected by an independent service center. A check engine light came on. Upon further inspection it was a Cylinder 6 misfire P0306. When the engine was inspected further by a mechanic it was determined that the cylinder wall was damaged and that coolant had entered the cylinder. Due to the extent of the engine damage the engine needed to be replaced.

Reported

May 2026

Incident date

Mar 2026

Mileage

Not provided

Outcome flags

None reported

While driving my engine light comes on and I lose power like it won’t take gear I can switch to manual and it’s fine engine light pulls a code for oil pressure sensor but I’ve done paid for that to be fixed and it still doing the same as above but the engine light will go off after cutting the jeep off and stays off for a few days then out of nowhere while driving it comes back on and the process starts all over

Reported

May 2026

Incident date

Dec 2025

Mileage

Not provided

Outcome flags

None reported

Oil cooler failure at 7 years and 90000 miles. This is a known engineering issue due to a plastic housing that is resolved by upgrading the oil cooler housing to aluminum instead of plastic. It’s a $1000 repair. Because this is an engineering issue the consumer should not have to pay the entire cost of the repair. This is a SAFETY AND ENVIRONMENTAL HAZARD DUE TO THE LEAKAGE OF OIL CAUSED BY THIS FAILURE. It should definitely be deemed a recall and fixed at the expense of the manufacturer!

Reported

May 2026

Incident date

Dec 2025

Mileage

Not provided

Outcome flags

None reported

The instrument cluster went black when I was driving. This prevents the driver from seeing warning lights, digital speedometer, the fuel gauge and the odometer. The car was examined by my private mechanic, and he stated he could not fix it. He advised me to go to the Jeep dealership. The car was then examined by the dealership, and they stated it would need a new instrument cluster at a cost of $1600, and I was charged $250 for the diagnostic. I then researched the issue and learned that Jeep has issued 2 recalls for this exact problem which included the make, model and year of my unit. The recall dates were September 2024 and April 2026. I called Jeep's help center and they stated my particular vehicle is not eligible for the recall because of where it was made. I feel this is not a valid reason and they should honor the recall for my vehicle.

Reported

May 2026

Incident date

May 2026

Mileage

Not provided

Outcome flags

None reported

One day out of the blue, my Jeep Wrangler received a "Service Shifter" error code. The error code threw about 40 other codes at the same time. Loss of power steering, loss of abs, engine kept revving on its own, windshield wipers turned on. While in park it felt as if it was trying to shift itself into other gears. Loss of steering while driving as well as the engine revving up and down while on the interstate. Every warning light came on and stayed on. I can let it sit for awhile and it'll drive fine for a little while until it does it all again and again. I have not taken it to a dealership yet due to all the threads on being charged $2000 and it not get fixed.

Reported

May 2026

Incident date

Apr 2026

Mileage

Not provided

Outcome flags

None reported

The contact owns a 2018 Jeep Wrangler. The contact stated that while driving the vehicle or while the vehicle was parked, the instrument panel intermittently flickered and then turned blank. The vehicle was taken to the dealer but was not diagnosed or repaired. The contact related the failure to NHTSA Campaign Number: 24V652000 (Electrical System). The manufacturer was notified of the failure. The failure mileage was approximately 90,000.

Reported

Apr 2026

Incident date

Apr 2026

Mileage

Not provided

Outcome flags

None reported

I own a 2018 Jeep Wrangler. The vehicle has a serious safety issue where the steering wheel shakes violently at freeway speeds, especially when driving over uneven roads or bumps. This makes the vehicle feel unsafe to operate. This issue was previously repaired under warranty with a steering damper replacement. However, the same problem has returned, indicating that the issue was not properly resolved. The dealership has recently verified the issue through a road test and confirmed the violent shaking condition. In addition, the vehicle currently has an active airbag warning light, and the dealership diagnosed a failed front right acceleration sensor. This raises concerns about the proper function of the airbag system in the event of a crash. I have contacted the manufacturer multiple times, but they have declined to provide assistance and have not been responsive. I am concerned that this vehicle has unresolved safety defects that could put the driver and passengers at risk.

Reported

Apr 2026

Incident date

Mar 2026

Mileage

Not provided

Outcome flags

None reported

The contact owns a 2018 Jeep Wrangler. The contact’s daughter stated that while driving at an undisclosed speed, the instrument panel became inoperable and was blank. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 104,000.

Reported

Apr 2026

Incident date

Apr 2026

Mileage

Not provided

Outcome flags

None reported

The contact owns a 2018 Jeep Wrangler JK. The contact stated that twice while driving approximately 40-60 MPH, the front end was violently shaking. After stopping, the vibration seized, and the vehicle was driven at slower speeds. While driving over a bump or expansion bridge, the failure recurred. The contact associated the failure with NHTSA Campaign Number: 18V343000 (Steering). The vehicle was taken to the local dealer, where it was diagnosed, and determined that the steering damper needed to be replaced. The manufacturer was contacted and confirmed that the VIN was not under recall. The manufacturer referred the contact to the NHTSA Hotline. The failure mileage was approximately 47,000.

Reported

Apr 2026

Incident date

Apr 2023

Mileage

Not provided

Outcome flags

None reported

On March 19, 2026 I paid $5,778.87 for repairs to my 2018 Wrangler JL. Repairs included the replacement of warped cylinder head and failed head gasket with coolant getting into the combustion chamber, showing up as rough running, misfire, flashing check engine light, and burning coolant smell. On April 18, 2026, at approximately 10:30 pm, after attending the [XXX] concert at Bank of America stadium (+70,000 in attendance), the vehicle stalled and was unable to be restarted or moved to the shoulder of the highway. The vehicle failure occurred on I277 outside of Bank of America Stadium with hundreds of cars passing us as my wife and were stranded in the middle lane. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Reported

Apr 2026

Incident date

Apr 2026

Mileage

Not provided

Outcome flags

None reported

I have a 2018 Jeep Wrangler JL Sport S (2 door) with approximately 66,000 miles. On March 26th, 2026 I had a flashing check engine light come up along with the vehicle shaking in low gears. I had the vehicle towed to the Jeep dealership (Gandrud Auto Group) from which I bought it from and upon their inspection they found the left bank head gasket leaking coolant into the combustion chamber causing misfires. This repair was over $5000 and took over a week to fix. The service ticket from Grandrud will be attached which lists all parts that needed to be replaced. This vehicle is much too new to be having these kinds of issues and Gandrud even stated that many customers with JL Wranglers have been coming to them with the same issue of the head gasket failing. 1. Left bank head gasket leaking coolant into the combustion chamber causing misfires. Photos will be attached. 2. Shaking vehicle. Had vehicle towed. 3. Dealership inspected and identified the issue. Invoice attached. 4. Check engine light came on for just one day back in December of 2025, was brought into Gandrud and it was a misfire code, no noticeable issues at the time however and check engine light went away. On March 26th, 2026 I had a flashing check engine light come up along with the vehicle shaking in low gears.

Reported

Apr 2026

Incident date

Mar 2026

Mileage

Not provided

Outcome flags

None reported

My radio cluster has shut off, screen went dark and blank while I was driving on 3 seperate occasions within the last 60 days. While driving the steering feels a little loose, the faster I go the more loose it feels. While on the interstate driving 70 mph my Jeep will not run straight, it kinda drifts back and forth and I am continuously having to correct it in order to stay in my lane. Not sure what is causing it to "drift" side to side and have heard of some Jeep Wranglers having death wobbles has me concerned of whether mine is going to do it.

Reported

Apr 2026

Incident date

Jan 2026

Mileage

Not provided

Outcome flags

None reported

Any time I get above 55 miles per hour the steering starts shaking and I feel as if I’m going to lose control of the vehicle. I have had the recalls done on it, but it continues.

Reported

Apr 2026

Incident date

Apr 2026

Mileage

Not provided

Outcome flags

None reported

The contact owns a 2018 Jeep Wrangler. The contact stated that while driving at an undisclosed speed or while starting the vehicle, the instrument panel was inoperable. The contact stated that the instrument panel failed to illuminate and remained blank. The vehicle was taken to an independent mechanic, where it was diagnosed with instrument cluster failure. The contact was informed that the instrument cluster needed to be replaced. The vehicle was not repaired. The dealer was contacted; however, the vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 130,000.

Reported

Apr 2026

Incident date

Apr 2026

Mileage

Not provided

Outcome flags

None reported

After several decades of producing the JK model Wrangler, Jeep transitioned to a JL model midyear 2018. There are essentially two distinct 2018 Jeep Wrangler models. Jeep (Stellantis) has accepted responsibility for a safety defect for the JL model years 2019 through current. This recognized defect affects heavy corrosion on the hinges for the doors which creates an extreme safety concern. My 2018 JL Wrangler has the same failure, same part, same time frame, but was unjustly excluded by build date. 6 of the 8 door hinges and surrounding body have various levels of corrosion. My dealer just completed a recall for a steering damper which is widely categorized as a concern for 2018 and 2019 JL Wranglers. This is irrefutable proof that 2018 JL Wranglers were built through the same assembly line process as 2019 and later versions. The safety concern I've described above should be included in the open factory recall that Jeep/Stellantis has accepted as their responsibility. I have contact customer service for Jeep/Stellantis multiple times. They refuse to hear my concerns, were incredibly unprofessional, and have hung up on me numerous times.

Reported

Apr 2026

Incident date

Apr 2026

Mileage

Not provided

Outcome flags

None reported

the digital screen on my jeep 2018 wrangler went out and I took my car to the dealership to have them look at it they said that they cluster needs to be replaced I looked up the cluster and noticed that there is a recall on it for some 2018 jeep wranglers but mine was not part of the recall. I am trying to figure out why my is not part of the recall if they are now have to replace my cluster. there recall number that my jeep is not a part of is NHTSA recall number 24V652. Can someone please explain why my VIN number is not included as I am having the same issue now

Reported

Apr 2026

Incident date

Apr 2026

Mileage

Not provided

Outcome flags

None reported

Numerous lights flash on dash-engine fan turns on high speed, coolant temp stops reading, check engine light comes on, unable to accelerate. Pull over but will not turn off. From what I’m reading it’s the CAN bus module and from what I’m finding on this site Jeep has many electrical failures but can’t fix it? Jeep should do what’s right and stand behind its product.

Reported

Apr 2026

Incident date

Apr 2026

Mileage

Not provided

Outcome flags

None reported

The electronic part of the dash stopped working. This has been an issue on many jeeps of this year with no recall to get it repaired

Reported

Apr 2026

Incident date

Apr 2026

Mileage

Not provided

Outcome flags

None reported

The vehicle is a 2018 Jeep Wrangler with a 3.6L engine and approximately 124,000 miles. The engine has experienced a failure involving multiple components, including suspected head gasket failure, significant oil loss with no visible external leak, low oil pressure, and engine knocking. Diagnostic trouble codes P0365 and P06DD were present, indicating camshaft position sensor issues and oil pressure control failure. The vehicle is available for inspection upon request. This condition creates a safety risk due to the potential for sudden engine failure and loss of power while driving, which could occur without warning and increase the risk of an accident. The problem has been confirmed by an independent repair facility, which identified low oil levels, coolant loss, and symptoms consistent with internal engine damage. The vehicle has not been inspected by the manufacturer. Prior to the failure, warning signs included a low oil pressure condition and engine performance changes. These symptoms developed rapidly over a short period of time. The vehicle is currently not safe to operate due to the risk of further engine damage or sudden failure.

Reported

Mar 2026

Incident date

Mar 2026

Mileage

Not provided

Outcome flags

None reported

CAN Bus is failing and giving me issues! Power steering stops working, auto stop start fails, I was taking off at an intersection and my vehicle lite up like a Christmas tree and would not shift out of first gear causing me to pull off the road at a dangerous spot.

Reported

Mar 2026

Incident date

Mar 2026

Mileage

Not provided

Outcome flags

None reported

On multiple, though infrequent occasions, while beginning a turn in our 2018 Jeep Wrangler JL, the steering wheel, abruptly and without warning, stops turning. The turn cannot be completed without exerting significant force on the wheel to overcome the resistance. This is very dangerous, especially when moving at highway speeds, as drivers may find themselves unable to stay on the road or worse, to avoid oncoming traffic. When we first reported this problem to a Jeep Dealer in 2018-2019, we were repeatedly told that they were unaware of the problem we described, and since they couldn’t reproduce the malfunction, they could not effect any repair. Over time, the problem worsened, not with more frequency but with more and more force being required to overcome the steering wheel resistance - increasing the likelihood that one might inadvertently oversteer when breaking through that resistance. After a recent incident that could have caused a serious accident, we looked online and found that ours was not an uncommon problem. There are numerous reports describing this very issue on the carcomplaints.com website. And Jeep actually issued a technical service bulletin in 2018 (TSB 08-092-18) that not only describes the problem, but also the fix. So Jeep not only knew about the problem, but they knew how to fix it and did not do so when we were under warranty. Now they are saying the fix will cost us literally thousands of dollars. This issue is dangerous and should have been under a mandatory recall from day one.

Reported

Feb 2026

Incident date

Jan 2026

Mileage

Not provided

Outcome flags

None reported

While driving the instrument panel goes dark or blacks out completely it happens randomly, but often

Reported

Feb 2026

Incident date

Jan 2022

Mileage

Not provided

Outcome flags

None reported

The contact owns a 2018 Jeep Wrangler. The contact stated that while her son was driving approximately 70-75 MPH, the vehicle stalled. The check engine and traction control warning lights were illuminated. Upon research, the contact associated the failure with NHTSA Campaign Number: 18V524000 (Electrical System). The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 138,000.

Reported

Feb 2026

Incident date

Feb 2026

Mileage

Not provided

Outcome flags

None reported

At speeds around 50 mph the steering wheel will "lock up" and become extremely difficult to steer if not impossible. Lowering speed to 28 mph will suddenly jolt the steering back to normal causing extremely dangerous steering response with a danger of over correcting once steering assist is regained. Dealer has not been able to replicate the issue and cannot find anything wrong with the vehicle. This has happened multiple times nearly resulting in a head on collision 2 separate times

Reported

Feb 2026

Incident date

Feb 2026

Mileage

Not provided

Outcome flags

None reported

My 2018 Jeep Wrangler JL only now has 77,700 miles and got a blown head gasket!? This is so UNACCEPTABLE! Makes me regret ever purchasing! There is a ton more with same issue some with less miles and has been well maintained. Took to the dealer is who diagnosed and supposedly repaired due to a warranty that I am having to pay BIG money for! Alos, UNCALLED FOR! Took to dealer when Aux light first appeared but then eventually the engine light came on and I took to dealer and that's when diagnosed this! VERY VERY UPSETTING AS warranty should not have to cover not to mention, HOW DO YOU STOP FROM HAPPENING in ANOTHER 70000 or less miles? JEEP NEEDS TO BE RESPONSIBLE AND STEP UP BIG AND DO SOMETHING REGARDING THIS PROBLEM THAT IS THERE PROBLEM!

Reported

Feb 2026

Incident date

Feb 2026

Mileage

Not provided

Outcome flags

None reported

Emergency break lever/pull tab gets stuck Vehicle failed to start several times causing tows Vehicle steering is loose and dangerous Steering is hard to control on a bump uneven payment or snowy rainy weather conditions . Wheel is loose can’t teach my teenager how to drive in this to dangerous even for me

Reported

Feb 2026

Incident date

Sep 2025

Mileage

Not provided

Outcome flags

None reported

This is a follow-up to NHTSA Complaint Number 11684726, submitted to provide additional information after the dealer diagnosis confirmed the defect. My 2018 Jeep Wrangler Sahara has experienced a complete Instrument Panel Cluster (IPC) failure, which has been diagnosed and confirmed by an authorized Jeep dealership. The instrument cluster remains blank during vehicle operation and is available for inspection upon request. As a result, I cannot view critical safety information including the speedometer, fuel level, warning lamps, turn signals, and other required driver displays. This creates a significant safety risk, as I am unable to monitor vehicle speed or receive warning indicators while driving. The vehicle has also experienced related electronic failures consistent with network communication disruption, including loss of the center infotainment display, radio failure, and HVAC malfunction with the defroster stuck in full operation and unresponsive to controls. Stellantis has declined repair assistance despite dealer confirmation. This failure mode is consistent with Recall 24V-652, which identifies internal instrument cluster failure resulting in blank displays. However, my VIN is not currently included in the recall population. Given the confirmed failure and safety impact, I respectfully request NHTSA review whether additional VIN ranges, including my vehicle, should be included. [XXX] [XXX] [XXX] Vehicle: 2018 Jeep Wrangler Sahara VIN: [XXX] Stellantis Case Number [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Reported

Feb 2026

Incident date

Jun 2025

Mileage

Not provided

Outcome flags

None reported

While driving at highway speed, my 2018 Jeep wrangler violently shakes in the wheel. It is unpredictable and very concerning. This is very unsafe as you have no control over this violent shaking, and you aren’t sure of what could happen. This appears to be a very common issues in the jeeps as there are various reports of this occurring. There is no warning lamps, messages, etc. when this occurs. This is a very big safety issue that needs to be addressed. After taking it to get looked at, I was made aware this could occur for several reasons in the car. All of these reasons should be addressed and fixed as this is a very known issue.

Reported

Feb 2026

Incident date

Jan 2026

Mileage

Not provided

Outcome flags

None reported

The contact owns a 2018 Jeep Wrangler. The contact stated that when the vehicle was started, the ABS and brake warning lights were illuminated. The contact stated that while depressing the brake pedal, the warning lights illuminated the brake pedal was soft. The contact stated that additional pressure was needed to depress the brake pedal to stop the vehicle. Additionally, the check engine warning light was intermittently illuminated. The vehicle was taken to a local dealer, where it was diagnosed and determined that the ABS module had failed and needed to be replaced; however, the part to repair the vehicle was on a national backorder. The vehicle was not repaired. The manufacturer was informed of the failure, and a complaint was filed. The failure mileage was approximately 69,000.

Reported

Feb 2026

Incident date

Nov 2025

Mileage

Not provided

Outcome flags

None reported

My 2018 Jeep Wrangler Sahara is experiencing a complete and permanent failure of the instrument panel cluster, which has gone entirely black. This is the exact safety defect described in Recall 24V-652 (Jeep Recall Code 30B), yet my VIN is currently being excluded from coverage. This is a severe safety hazard as I have suffered a total loss of critical safety information; I cannot see my vehicle speed, fuel level, engine temperature, or any vital warning lights while driving. This defect leaves me unable to monitor the vehicle's operation, significantly increasing the risk of a crash or being stranded, and a local dealership has quoted me thiusands to repair this known manufacturing defect. I am requesting that the NHTSA investigate why my vehicle is excluded from this recall despite exhibiting identical hardware failure symptoms.

Reported

Jan 2026

Incident date

Dec 1969

Mileage

Not provided

Outcome flags

None reported

Vehicle equipped with a 3.6L Pentastar V6 engine developed loud ticking noises, engine misfires, and loss of power while driving. The vehicle hesitated during acceleration and could not reliably maintain speed, creating a safety risk in traffic. An authorized dealership pulled diagnostic trouble codes, acknowledged the abnormal ticking, and advised the failure was likely related to the camshaft, lifters, and rocker arms. The vehicle was then taken to an independent mechanic for further inspection. The independent mechanic confirmed failure of the valve train and camshaft components, requiring replacement of the passenger side intake camshaft (Bank 2), cam phaser, phaser bolt, and all lifters and rocker arms. Photos of the failed components are available. The defect was confirmed by both a dealership and an independent repair facility. Issue presents risk of sudden loss of power while the vehicle is in motion.

Reported

Jan 2026

Incident date

Jan 2026

Mileage

Not provided

Outcome flags

None reported

Paint, bubbling and corrosion not declared as a defect by the jeep dealership. I would have never purchased knowing this information. I am looking for a goodwill repair of the defect of mixed metal causing corrosion on the body. Jeep states I am out of the extended warranty for repair. I am hoping to open a claim to get a repair of this manufacturing defect that was not disclosed in good faith to me.

Reported

Jan 2026

Incident date

Aug 2025

Mileage

Not provided

Outcome flags

None reported

My wife and I were at a stop light behind a box truck in our 2018 Jeep Wrangler, about 15 feet between us. I had slowed to stop and had my foot on the brake. All of the sudden the Jeep reved up (idle increase), did not see the tachometer, and with my foot on the brake accelerated into the box truck in front of us. When it started to accelerate, I pushed the brake peddle to the floor to stop the Jeep but it did not do a thing. I see 2 problems her: 1. The acceleration when stopped 2. The brake did not hold. There were no injuries or damage to the box truck. We were able to drive the Jeep about 20 miles to the dealer we bought at. It is ow being worked on in the body shop. The Jeep dealer technicians did a computer check on any codes that were activated, but unfortunately all after the fact.

Reported

Jan 2026

Incident date

Jan 2026

Mileage

Not provided

Outcome flags

Crash

On January 14, 2026, my 2018 Jeep Wrangler JK Sport (3.6L) with approximately 134,099 miles was inspected at Cox’s Automotive & Repair Inc. due to a check engine light and rough engine operation. During diagnostic testing, multiple fault codes were identified, including P000A (camshaft position slow response), P0300 In addition to the diagnostic findings, I contacted and visited multiple automotive repair facilities regarding this issue. Each shop advised that they have previously serviced 2018 Jeep Wrangler JK models with the same 3.6L engine presenting identical symptoms and diagnostic codes, including timing correlation errors, misfires, and internal engine damage. Several repair facilities indicated that they have had the same make and model in their shops for the same failure, including vehicles with significantly lower mileage, with one reported case occurring at approximately 7,000 miles. Based on consistent feedback from multiple independent repair facilities, this condition appears to be a known and recurring mechanical issue associated with this vehicle model, rather than damage caused by misuse, neglect, or owner fault. (random/multiple cylinder misfires), P0017 and P0019 (camshaft/crankshaft timing correlation errors). Upon removal of the oil filter, metal debris was found in the oil filter cartridge, indicating possible internal engine damage. Based on these findings, the repair facility recommended engine replacement or major engine repair.

Reported

Jan 2026

Incident date

Dec 2025

Mileage

Not provided

Outcome flags

None reported

Chrysler (FCA US, LLC) is recalling certain 2018-2024 Jeep Wrangler vehicles. The wiring harness for the rearview camera and the center brake light may short circuit, which can disable the rearview camera image and center brake light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 111, "Rear Visibility" and 108, "Lamps, Reflective Devices, and Associated Equipment."

Risk: A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash. Additionally, a center brake light that fails to illuminate can fail to indicate to other drivers that the vehicle is slowing down, increasing the risk of a crash.

Remedy: Dealers replaced the harness for the center brake light and rearview camera and/or the spare tire carrier/harness assembly, as necessary, free of charge. All vehicles were repaired by January 15, 2024. Owner notification letters were mailed September 26, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 77B.

Chrysler (FCA US, LLC) is recalling certain 2020-2024 Jeep Gladiator and 2018-2024 Jeep Wrangler vehicles. The instrument panel cluster may experience an internal short circuit and fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Controls and Displays."

Risk: An instrument panel that fails to display critical safety information, such as the speedometer or warning lights, can increase the risk of a crash.

Remedy: Dealers will replace the instrument panel cluster, free of charge. Owner notification letters were mailed between October 3, 2024, and January 23, 2025. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 30B.

Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

Risk: The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

Remedy: Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.

Chrysler (FCA US LLC) is recalling certain 2018 Jeep Wrangler vehicles. The rear under body ladder rail may corrode, possibly reducing the strength of the rear floor pan and causing the left rear seat mount to become loose.

Risk: If the floor pan strength is reduced and/or the rear seat mount becomes loose, the rear seat may detach in a crash, increasing the risk of injury.

Remedy: Chrysler will notify owners, and dealers will inspect and, as necessary, coat the interior and exterior of the driver's side rear underbody ladder rail with three-part rust protection. The recall began September 11, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U27.

Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid vehicles. The powertrain control module may be equipped with a voltage regulator chip in the circuit board that may fail, causing a stall or a no start condition.

Risk: A vehicle stall can increase the risk of a crash.

Remedy: Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.

Chrysler (FCA US LLC) is recalling certain 2018 Jeep Wrangler four-door vehicles. The right rear passenger door latch may not be in the correct location, possibly preventing the door from latching properly.

Risk: If the right rear passenger door opens unexpectedly, it can increase the risk of injury.

Remedy: Chrysler will notify owners, and dealers will repair the right rear door latch reinforcement, free of charge. The recall begin December 6, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UB6.

Chrysler (FCA US LLC) is recalling certain 2018 Dodge Charger, Durango and Challenger, Jeep Grand Cherokee and Wrangler, Chrysler 300, and RAM 1500 vehicles. An incorrect transmission park lock rod may have been installed in the transmission.

Risk: If the incorrect park lock rod is installed, the transmission may not shift into 'PARK' and keep the vehicle from moving, increasing the risk of unintended vehicle movement and the risk of a crash.

Remedy: Chrysler will notify owners, and dealers will install the correct park lock rod, free of charge. The recall began June 28, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U43.

Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating.

Risk: If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.

Remedy: Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.

Chrysler (FCA US LLC) is recalling certain 2018 Jeep Wrangler vehicles. The intermediate steering shaft may not have been properly welded causing a split where the external spline is formed.

Risk: If the weld seam splits, the steering wheel may lose center positioning causing a loss of steering responsiveness and increasing the risk of a crash.

Remedy: Chrysler will notify owners, and dealers will inspect and, as necessary, replace the intermediate steering shaft, free of charge. The recall began June 21, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U48.

Chrysler (FCA US LLC) is recalling certain 2018-2019 Jeep Wrangler vehicles. The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability.

Risk: An unexpected reduction in steering ability, can increase the risk of a crash.

Remedy: Chrysler will notify owners, and dealers will inspect and repair the track bar bracket welds, as necessary, free of charge. The recall is expected to begin November 17, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is UA5.

Erwin Hymer Group USA LP dba American Fastbacks (EHGUSA-AF) is recalling certain 2018 Jeep Wrangler vehicles sold with a roof top tent installed. The top cover of the roof top tent may crack or break, possibly resulting in the cover detaching from the vehicle while moving.

Risk: If the roof top tent cover detaches from the vehicle while moving, it can create a road hazard, increasing the risk of a crash.

Remedy: The remedy for this recall is still under development. The recall began May 9, 2019. Owners may contact American Fastbacks customer service at 1-844-533-7997 extension 301. Note: Vehicles in this recall are also included in recall 19V-190.

Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.

Risk: A separated or severed seat belt buckle strap will result in an inoperable seat belt, increasing the risk of injury in the event of a crash.

Remedy: FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is VA6.

Chrysler (FCA US, LLC) is recalling certain 2018-2021 Jeep Wrangler and 2020-2021 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

Risk: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

Remedy: FCA US LLC will notify owners, and dealers will add software to reduce engine torque capability when clutch assembly temperatures rise to a level that may damage the inner pressure plate, free of charge." FCA has ordered a stop sale for the affected vehicles as of February 25, 2021. Owner notification letters were mailed on March 4, 2021.

Chrysler (FCA US, LLC) is recalling certain 2018-2023 Jeep Wrangler, and 2020-2023 Jeep Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

Risk: Overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

Remedy: Dealers will replace the clutch assembly and update the software, free of charge. Owner notification letters were mailed from November 16, 2023 through July 25, 2024. Owners may contact (FCA US, LLC) customer service at 1-800-853-1403. FCA US LLC's number for this recall is 19A. This recall expands and replaces previous recall 21V-028. Vehicles previously repaired under recall 21V-028 will need to have the new remedy completed.