TireKick

Model-year record

2021 Ford Bronco
Image: Wikimedia Commons contributor · See source file

2021 Ford Bronco

See the complaints, recalls, crash rating, and fuel economy in the public record. Then check the mileage and history of the car you found.

This page shows records, not a buy or avoid call.

The same model year can include a well-kept car and a neglected one. Use these records to plan what to check. Use the specific-car check when you know the mileage.

Complaints filed

218

Reports to NHTSA, 2021

Safety recalls

19

NHTSA campaigns on record

NHTSA crash test

Not rated

Overall NCAP rating

Combined MPG

18

EPA estimate

Known issues

Engine issues lead owner complaints (27% of 218 reports), followed by electrical system (12%).

Engine27% · 58 reports
Electrical System12% · 27 reports
Suspension11% · 23 reports
Unknown Or Other9% · 20 reports
Service Brakes6% · 13 reports
Visibility/Wiper6% · 12 reports
Structure5% · 10 reports
Fuel/Propulsion System4% · 9 reports

+ 13 more component categories with fewer reports.

Share of all 218 NHTSA complaints for this model year, grouped by the component owners named. Bars are scaled to the largest category. Examples: ODI 11679626, ODI 11718771, ODI 11675173, ODI 11653564, ODI 11652976.

Individual complaint reports(218)

Showing the 50 most recent reports
Power TrainJul 2026 · ODI 11751184Details +

Persistent highway-speed vibration (45 to 82 mph) present since July 2022, documented at five Ford dealerships between 21,000 and 100,000 miles, and still unresolved and undiagnosed after four years. It is a whole-vehicle shake felt primarily through the seat and from the rear of the vehicle at highway speed, occurring on highways nationwide (documented in [XXX], [XXX], and [XXX]). Wheel and tire causes were controlled for and eliminated: three complete wheel-and-tire set swaps (two on factory stock sets) did not change the vibration; a dealer road-force balance (08/2024) did not resolve it; it persists while coasting in neutral. On XXX an independent facility (Heritage Auto Solutions, [XXX]) road-tested and lift-inspected the vehicle and identified objective anomalies at the rear driveshaft: an abnormal welded balance-weight cluster and visible play at the slip yoke; the facility recommended replacement. The shaft is currently at an independent driveline facility for balance testing; the root cause of the vibration has NOT been definitively confirmed by any facility. That is the safety concern: a sustained, unresolved vibration consistent with a driveline-area defect at 70+ mph, present for four years, with no dealer ever performing an instrumented driveline diagnosis. A driveline component failing at highway speed is a loss-of-control hazard. Ford has issued driveline field actions on this platform (Customer Satisfaction Program 22B27, front driveshaft, noise/vibration; Recall 26V236, transfer-case misalignment, possible loss of drive power). The manufacturer was formally notified in writing of the independent findings on XXX (Ford case XXX) and has not responded as of XXX. Attached: the independent facility's written report and driveshaft photographs. The vehicle is currently out of service. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Reported
Jul 2026
Incident date
Jun 2026
Mileage
Not provided
Outcome flags
None reported
Open ODI 11751184 at NHTSA →
Unknown Or OtherJul 2026 · ODI 11750401Details +

Component or system that failed/malfunctioning:Climate Control System / Rear Passenger Cabin Ventilation.Is the component available for inspection?Yes, the vehicle and the climate control system are completely intact, unaltered, and available for physical inspection upon request.Description of Incident & Safety Risks:There is little to no airflow reaching the rear passenger seating area of the vehicle. The 4-Door 2021 Ford Bronco relies entirely on hidden, under-seat floor ducts to regulate back-seat temperatures, as it lacks center console or upper B-pillar vents. Under normal operation, the air reaching the back row is severely restricted, leaving the rear cabin isolated from proper climate regulation. My safety and the safety of others have been severely put at risk during travel. Because of the near-zero airflow, the rear passenger compartment quickly traps extreme ambient heat or freezing cold. This environment is highly unsafe for vulnerable occupants riding in the back seat—specifically young children, elderly family members, and animals—who cannot properly regulate their body temperatures and face an immediate risk of heat exhaustion, heatstroke, or hypothermia. Additionally, the lack of air circulation creates a critical safety hazard by causing severe fogging on the rear side windows, obstructing driver blind-spot visibility and increasing crash risks.Dealer/Service Confirmation & Manufacturer Inspection:The problem has not yet been confirmed by a Ford dealer or independent service center, nor has the vehicle or system been inspected by the manufacturer, police, insurance representatives or others. The vehicle remains exactly as it was when the issue was identified.Warning Lamps, Messages, or Prior Symptoms:There were absolutely no dashboard warning lamps, digital error messages, or physical symptoms prior to this issue. The lack of adequate airflow is a continuous condition.

Reported
Jul 2026
Incident date
Jul 2026
Mileage
Not provided
Outcome flags
None reported
Open ODI 11750401 at NHTSA →
Unknown Or OtherJul 2026 · ODI 11748607Details +

It has now been 1 year since the recall 25V455 was issued for my 2021 Ford Bronco. I use my Bronco for business but due to the recall, it has been unable to be used due to legal reasons in my state. I have lost thousands of dollars from the vehicle sitting and Ford continues to fail to provide a timely remedy. The date of the recall being issued has been pushed back over a dozen times and now shows "no eta". They have no communication with their dealers as to what the delay is and Ford Customer Service will not disclose anything other then "we will notify you when it becomes available". This delay, lack of communication and constant failure to uphold recall release dates are causing undue financial burden on my business and Ford displays a glaring lack of caring to get this issue resolved. Dealerships are likewise frustrated as they are bearing the front of peoples questions and anger regarding the recall fix but Ford does not communicate anything with them. I am formally demanding that Ford be held accountable toward being transparent with their customers. Provide timely and transparent updates on the progress toward the recall fix and ensure that progress is actually happening. In addition, I have in my possession a 2023 Bronco's fuel pump that is a newer design that Ford has been installing in their 2023+ Bronco's. This new design is not affected by the recall and fits into my 2021 Bronco without modification. Ford has proven that they have a fix as they are installing it in new Bronco's from 2023+. When I ask if I can install a unaffected fuel pump into my 2021 Bronco to get the recall cleared, I am denied. That is unacceptable.

Reported
Jul 2026
Incident date
Jul 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11748607 at NHTSA →
Fuel/Propulsion SystemJul 2026 · ODI 11747918Details +

Ford has failed to remedy RECALL 25V455 issued OVER 1 YEAR AGO !!!!!!!! My fuel pump failed in August of 2025 and left me (single female) stranded on side of interstate highway in 100' heat. Dealer confirmed in-tank fuel pump failed and replaced with another recalled pump. There was no warning that failure was happening until vehicle stopped in traffic. Had over 1/4 tank of gas at the time. Afraid to drive vehicle out of town because it could strand me again. Can not trade in vehicle because open recall reduces value of vehicle

Reported
Jul 2026
Incident date
Aug 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11747918 at NHTSA →
Air BagsJun 2026 · ODI 11746859 · crashDetails +

I was driving in the northbound left hand lane on creasy lane in Lafayette, Indiana, approaching Rome Drive. A driver from a side street took an illegal left hand turn to head towards the northbound lanes of creasy lane, I was traveling over 30 mph, maybe 40 at the time of the collision. I was unable to see the other driver until it was too late as they passed by drivers turning from the right hand lane onto the side road they had been at. My airbags did not deploy during the collision, nor did my pre collision assist alert nor did my brake system engage. I suffered extensive front end damage at the time of the incident. There was a previous recall for my airbags in this vehicle, as well as notifications in 2024 that my collision systems had been disengage during warranty work.

Reported
Jun 2026
Incident date
Jun 2026
Mileage
Not provided
Outcome flags
Crash
Open ODI 11746859 at NHTSA →
Electrical SystemJun 2026 · ODI 11744621Details +

Window actuator does not properly open or close passenger window to open door properly, which is a safety risks to a child. Window could shatter because window will not roll down the inch or so to pull the door open. In order to open the door, the window will shake vibrantly and risk of a child of a possible window shatter. Ford says this is a normal wear and tear and it’s at owners cost to replace. To me that’s unacceptable.

Reported
Jun 2026
Incident date
Jun 2026
Mileage
Not provided
Outcome flags
None reported
Open ODI 11744621 at NHTSA →
Vehicle Speed ControlJun 2026 · ODI 11744011Details +

I was driving on the highway with standard cruise control (I don't have adaptive cruise) and I went to press the brakes and the brake pedal was SUPER stiff and I had to press unreasonably hard to disengage the cruise control and slow down. When the pedal finally gave, I ended up slamming on the bakes so much that my passenger was startled and we both lurched forward due to our momentum. Afterwards, my brake light light came on, on the dashboard. I went to AutoZone to get a reading and it said it was the brake assist vacuum or something like that. This could have caused a very bad accident in too different ways. One, if I didn't stop in time due to the delayed braking from the stiff pedal or getting rear ended due to inadvertently slamming on the brakes at highway speed.

Reported
Jun 2026
Incident date
May 2026
Mileage
Not provided
Outcome flags
None reported
Open ODI 11744011 at NHTSA →
SuspensionMay 2026 · ODI 11741008Details +

After my Ford dealer applied their recall "fix" on the rear shocks of my 2021 Bronco with Sasquatch package my passenger side rear shock reservoir came off while driving down the freeway. It didn't hit anyone but it was scary never the less.

Reported
May 2026
Incident date
Apr 2026
Mileage
Not provided
Outcome flags
None reported
Open ODI 11741008 at NHTSA →
Power TrainMay 2026 · ODI 11736856 · fireDetails +

My drive shaft/coupling caught fire at the front transfer case. I was able to extinguish it safely. This is the same description as: NHTSA Recall No.: 26V236 Manufacturer Recall No.: 26S26 And the description “ Vehicle 1: 2021-2025 FORD BRONCO‘ includes my vehicle, however, my VIN/license plate number do not show this recall in effect.

Reported
May 2026
Incident date
May 2026
Mileage
Not provided
Outcome flags
Fire
Open ODI 11736856 at NHTSA →
Unknown Or OtherMay 2026 · ODI 11735906Details +

Recall from last July not having a remedy to fix yet

Reported
May 2026
Incident date
May 2026
Mileage
Not provided
Outcome flags
None reported
Open ODI 11735906 at NHTSA →
Electrical SystemMay 2026 · ODI 11735509Details +

I am submitting a safety complaint regarding my Ford vehicle’s infotainment screen failure, which has been identified under a recall but currently has no available remedy or repair timeline. When the screen goes blank or becomes unresponsive, I lose access to critical safety features, including the rearview camera, which is federally required. This significantly increases the risk of accidents while reversing, especially in areas with pedestrians. The system also affects access to navigation, hands-free communication, and important vehicle alerts, forcing me to either drive without these features or become distracted trying to compensate. Although Ford has acknowledged this issue, there is no clear timeline for a fix, and no accommodations have been provided. I am expected to continue driving a vehicle that does not meet expected safety standards, which puts both myself and others at risk. I rely on my vehicle daily, including transporting passengers, and the lack of a functioning safety system is a serious concern. The absence of communication and support from Ford regarding a resolution is also concerning. I respectfully request that NHTSA investigate this issue and require Ford to provide a timely remedy or appropriate accommodations, such as a loaner vehicle or interim solution, to ensure driver and public safety while awaiting a permanent fix.

Reported
May 2026
Incident date
Mar 2026
Mileage
Not provided
Outcome flags
None reported
Open ODI 11735509 at NHTSA →
Electrical SystemApr 2026 · ODI 11733378Details +

The digital gauge cluster where it shows sensitive information is a blacked out screen. I took it an automotive shop to investigate the issue. They ran a diagnositic and confirmed the screen is receiving power, fuses are good, but the screen is not powering up. I cannot view the digital speed, fuel gauge, mileage, access GOAT modes, view tire pressure, view oil life, and other critical data, etc. This first occured a few months ago and would randomly turn back on, but not the screen is black more than it is on. Luckily I am able to track the fuel gauge (miles to empty) on the infotainment screen.

Reported
Apr 2026
Incident date
Jan 2026
Mileage
Not provided
Outcome flags
None reported
Open ODI 11733378 at NHTSA →
SeatsApr 2026 · ODI 11731872Details +

3 separate safety-related components have failed on my 2021 Ford Bronco, all of which correspond to open federal safety recalls that remain unremedied: 1. Infotainment/APIM Module & Backup Camera System (Recall Campaign 26V124): my infotainment screen fails to turn on, particularly in high-temperature conditions. When this occurs, the rearview/backup camera is completely non-functional. The vehicle displays no image when in reverse gear, eliminating all camera-assisted visibility behind the vehicle. This directly matches the conditions described in Recall 26V124, issued March 4, 2026. No remedy has been provided. 2. Digital Instrument Cluster / Dashboard: my digital dashboard intermittently fails to illuminate at vehicle startup. This occurs randomly and without warning. When it fails, the driver cannot see critical safety information including current speed, fuel level, engine temperature, or any warning indicators. Video documentation of this failure exists. This component is available for inspection upon request. 3. Low Pressure Fuel Pump (Recall Campaign 25V455): my vehicle has stalled on multiple occasions while in motion. During stall events, all dashboard warning lights illuminate simultaneously. This is consistent with the fuel delivery failure described in Recall 25V455, issued July 8, 2025, which states the fuel pump can fail causing loss of fuel pressure and an engine stall while driving. No remedy has been provided since the recall was issued in July 2025 (~9 months ago). All components are available for inspection upon request. However, the authorized Ford dealership in the area has refused to accept the vehicle for service or inspection, citing parts unavailability. Engine stall while in motion. my vehicle has stalled multiple times while being driven. The driver works as a real estate agent and regularly transports clients in this vehicle. The engine has stalled with passengers present. A sudden engine stall while driving results in immediat

Reported
Apr 2026
Incident date
Nov 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11731872 at NHTSA →
Fuel SystemApr 2026 · ODI 11731407Details +

The contact owns a 2021 Ford Bronco. The contact received notifications of NHTSA Campaign Numbers: 25V455000 (Fuel System, Gasoline) and 25V721000 (Seats); however, the parts to do the recall repairs were not yet available. The local dealer was contacted but the vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The manufacturer was made aware of the issue. The contact had not experienced a failure.

Reported
Apr 2026
Incident date
Oct 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11731407 at NHTSA →
SuspensionMar 2026 · ODI 11728322Details +

See attached document for complaint.

Reported
Mar 2026
Incident date
Jan 2026
Mileage
Not provided
Outcome flags
None reported
Open ODI 11728322 at NHTSA →
Lane DepartureMar 2026 · ODI 11724615Details +

My BLIS module on the passenger side does not work and I have a constant warning light displayed that there is a system malfunction. Under further investigation, this is a KNOWN design issue caused by the rear wiring harness that contains the BLIS sensor rubbing against components in the rear bumper. My vehicle has 31000 miles on it and is now out of warranty. Ford dealers are aware of this issue but claim it is not a recall and not under warranty. This is a safety issue.

Reported
Mar 2026
Incident date
Mar 2026
Mileage
Not provided
Outcome flags
None reported
Open ODI 11724615 at NHTSA →
Unknown Or OtherFeb 2026 · ODI 11720785Details +

The instrument cluster cracked. Woke up one day and it was cracked. The crack is traveling through the important screens. Cord won’t do anything, but dozens have reported online.

Reported
Feb 2026
Incident date
Aug 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11720785 at NHTSA →
Service BrakesFeb 2026 · ODI 11719526Details +

Brake fault warning occurring continuously. Seems to be a wide issue with Broncos 2021-2025. The brakes become “squishy” and have to push them to the floor to stop.

Reported
Feb 2026
Incident date
Feb 2026
Mileage
Not provided
Outcome flags
None reported
Open ODI 11719526 at NHTSA →
EngineFeb 2026 · ODI 11718771Details +

A Safety Recall was issued on the vehicle with no remedy. The recall was in reference to the Engine Intake Valves and stated; "The engine intake valves may crack and break, which could result in loss of motive power and increase the risk of a crash". It also stated, " Prior to losing motive power, an engine malfunction indicator lamp may illuminate in the cluster and the driver may notice that the vehicle is running rough". This issue was the result of Ford manufacturing using a material that had "hardness issues". This all came out prior to the vehicle reaching the end of its warranty mileage. A test was required on the engine at the dealership at which time, the technician determined there was no need to perform the "recall test" (confirmed by video sent to us). On or around Dec. 17th, while my wife was driving the vehicle and entering a gas station, the check engine light came on, and the vehicle began losing power. She parked and immediately contacted the Ford dealership. They advised her to not drive the vehicle and have it towed to the nearest dealership (She was in Pennsylvania picking up our daughter from college). It was determined by the dealership in Pa. that compression in a cylinder was down 5% and the vehicle needed a new engine. We had the vehicle towed back to Virginia and inspected by the dealership who services the vehicle. Parts of the engine were removed for visual inspection at which time a crack intake valve was found, confirming the engine was no good. Also, confirming the issue Ford had stated in its recall. All information and pictures were sent to Ford manufacturing for determination on fixing the problem. Ford has said they will not cover the total cost to make good on their recall because the vehicle was out of warranty (miles were exceeded). How are consumers protected from manufactures taking advantage of mileage? The SAFETY recall was issued long before the warranty ran out. What if my wife had crashed w/ our daughter?

Reported
Feb 2026
Incident date
Dec 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11718771 at NHTSA →
Lane DepartureFeb 2026 · ODI 11715858Details +

The wiring harness is rubbing against the bumper, causing it to wear and eventually cut through. This causes an error to my BSM/Cross Traffic alert. I have an extended warranty, but it doesn't cover it. This is a problem I have seen on the Bronco6G forums.

Reported
Feb 2026
Incident date
Feb 2026
Mileage
Not provided
Outcome flags
None reported
Open ODI 11715858 at NHTSA →
Power TrainFeb 2026 · ODI 11714757Details +

Component or system that failed or malfunctioned: The fuel delivery system, specifically the fuel pump, which is subject to an active safety recall. The recall states that fuel pump failure can result in loss of fuel pressure and flow, leading to engine stall. The vehicle is available for inspection upon request. How safety was put at risk: A sudden engine stall while driving would result in an immediate loss of propulsion and power, creating a significant risk of collision, particularly at highway speeds or in traffic. This creates a dangerous situation for the driver, passengers, and surrounding vehicles due to the inability to accelerate or maintain speed. Has the problem been reproduced or confirmed by a dealer or service center: The defect has been confirmed by the manufacturer through an official safety recall. At this time, there is no repair remedy available. The vehicle has not yet been repaired due to lack of an available fix. Has the vehicle or component been inspected: The vehicle has not yet been physically inspected for this specific failure because the recall remedy is not available. The defect has been acknowledged by the manufacturer as part of the active recall. Warning lamps, messages, or symptoms prior to failure: At this time, there is no warning indicating when or if the fuel pump may fail. The recall states the failure may occur without warning. No prior warning lamps or messages have reliably indicated when the failure could occur. Additional information: Due to the nature of this defect and the lack of an available repair, I no longer feel the vehicle is safe to operate. The uncertainty of a sudden engine stall has created ongoing safety concerns and financial hardship, as I am responsible for a vehicle that may fail without warning.

Reported
Feb 2026
Incident date
Jul 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11714757 at NHTSA →
Electrical SystemJan 2026 · ODI 11712776Details +

The contact owns a 2021 Ford Bronco. The contact stated that while driving at an undisclosed speed, the parking assist fault warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed with a failed wiring harness. The contact was informed that a wire from the wiring harness was burned. In addition, the contact was informed that if the wire continued burning it might start a fire. The vehicle was repaired. The contact was informed that the repair was not covered under warranty. The manufacturer was made aware of the failure, and a case was filed. The claim for the repair was denied. The failure mileage was approximately 28,000.

Reported
Jan 2026
Incident date
Dec 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11712776 at NHTSA →
Electrical SystemJan 2026 · ODI 11712311Details +

I received an alert on the dash stating there was an issue with the blind spot monitoring/rear cross traffic system. It was erroring off and on for that entire drive. When I got home, I googled the issue and it appears it's a known issue with '21 and some early '22 broncos where they factory installed the blind spot module wiring harness too close to the rear bumper. Over time, the wires rub and eventually rub bare and corrode or short out. I went out to take a look and sure enough, I had rubbed through on the driver side (photo) and the passenger side was nearly rubbed through. I have an extended warranty and it's at the dealership today. This is a manufacturing defect and should be covered (even if out of warranty) in my opinion. We will see what kind of story the dealer can come up with to wiggle out of it being covered under warranty.

Reported
Jan 2026
Incident date
Jan 2026
Mileage
Not provided
Outcome flags
None reported
Open ODI 11712311 at NHTSA →
Forward Collision AvoidanceJan 2026 · ODI 11712374Details +

While driving I lost most/all ADAS system. I received several alerts that kept repopulating. No Cross Traffic working No Blind Sport working No Cruise Control No Forward Collision working No Lane Departure working I took the rear assembly by the taillight and rear bumper. The wires and electrical components are corroded. Koons Ford Annapolis Maryland is requiring $1520 parts and labor.. This is a major safety problem as it was not designed correctly. Many Bronco Owners are going through this..

Reported
Jan 2026
Incident date
Dec 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11712374 at NHTSA →
Electrical SystemJan 2026 · ODI 11711629Details +

Bronco wire corrosion cross traffic refers to a known issue where wiring under the rear bumper, often for the blind spot/cross-traffic sensors, chafes, frays, and corrodes, causing system faults and failures, sometimes due to design flaws or environmental exposure to salt, requiring inspection and repair of the harness. This problem triggers error messages like "Cross Traffic System/Blind Spot System Fault" in the instrument cluster, impacting safety features, with potential fixes involving harness repair, protective sheathing, or sensor replacement. My car’s wiring was corroded due to this flaw and required a repair exceeding $1,000.

Reported
Jan 2026
Incident date
Dec 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11711629 at NHTSA →
Service BrakesDec 2025 · ODI 11707821Details +

Brake Light issue: Red Brake Light appears when driving over 40 MPH. To fix issue Tube Vacuum had to be replaced. Part# MB3Z 2420 This seems to be an on going issue with 2021 Broncos.

Reported
Dec 2025
Incident date
Dec 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11707821 at NHTSA →
Unknown Or OtherDec 2025 · ODI 11707156Details +

A serious safety recall advised in July of 2025 still has not been fixed.

Reported
Dec 2025
Incident date
Dec 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11707156 at NHTSA →
SuspensionDec 2025 · ODI 11706745Details +

The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA Campaign Number: 25V025000 (Suspension); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at an undisclosed speed, the vehicle was bouncing. Additionally, the rear-end swayed while driving over a bump. The dealer was made aware of the failure but confirmed that parts were on backorder. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 40,000.

Reported
Dec 2025
Incident date
Sep 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11706745 at NHTSA →
Electrical SystemDec 2025 · ODI 11706454Details +

Location of wiring from the factory for Blind Spot Warning and Cross Traffic Alert systems is not protected. The wiring has frayed and broken due to the wiring being unprotected, loose and rubbing on the rear bumper, causing the systems to not function. This is a blatant design defect from the factory, causing two safety systems to fail. Reporting now as, to the best of my knowledge, the manufacturer has not issued a TSB or recall and dealerships have acknowledged the issue.

Reported
Dec 2025
Incident date
May 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11706454 at NHTSA →
Unknown Or OtherDec 2025 · ODI 11705997Details +

Ford has 3 safety recalls on 2021 ford bronco and they have no remedy to fix any of them yet. My car stalled out 3 times now because of the low pressure fuel pump failure recall. I was pulling out into traffic and it stalled out while a car was coming at me. The only solution Ford had was to put old parts in the car which I refused. I asked for a loaner vehicle and they said they don’t have any. Recall warning is going on 6 months. I am at a risk and other people are at a risk having my car on the road, tried lemon law and Ford denied me. Nobody feels safe in my car and someone is going to get seriously hurt if this happens at the wrong time.

Reported
Dec 2025
Incident date
Nov 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11705997 at NHTSA →
Exterior LightingDec 2025 · ODI 11702446Details +

While driving in snowy conditions the headlights become covered with snow to the point of not illuminating enough to see. Which then makes trying to find a spot to pull over safely to wipe them becomes extremely dangerous. The snow covered lights happens quickly. Creating hazardous driving conditions. The data provided is the most recent. This happens every winter since purchasing this vehicle. I was not familiar with notifying your agency until recently.

Reported
Dec 2025
Incident date
Nov 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11702446 at NHTSA →
Electrical SystemNov 2025 · ODI 11698141Details +

I was driving on the highway at a speed of approximately 70 miles per hour when the Bronco driver screen gave multiple warning notices and at the same time, the accelerator would not react. Steering power was fine. I was in the second from far left lane on a six lane highway and losing speed quickly. I was able to move to the right and drift to the side of the road without incident. Once stopped, I turned the ignition off and waited a few seconds and then turned it back on again. The error messages all cleared and the Bronco accelerator reacted appropriately. I drove it straight to the dealership for inspection. They found the 210 connector was not making a good connection. They cleaned it and added electric grease and reconnected. Everything cleared and the connection was deemed good. I have not worked in the Bronco engine compartment or had work done that would have resulted in loosening the 210 connector. My understanding from the shop is that corrosion caused this connector to loosen.

Reported
Nov 2025
Incident date
Oct 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11698141 at NHTSA →
Fuel SystemOct 2025 · ODI 11694953Details +

The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA Campaign Number: 25V455000 (FUEL SYSTEM, GASOLINE). However, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, the vehicle failed to accelerate as intended while depressing the accelerator pedal. The failure had occurred while driving from a stop or while driving uphill. No warning lights were illuminated. The contact stated that on a separate occasion, an unknown message about the brake system was displayed on the instrument panel. The local dealer was not contacted after the most recent failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 40,000.

Reported
Oct 2025
Incident date
Oct 2021
Mileage
Not provided
Outcome flags
None reported
Open ODI 11694953 at NHTSA →
Fuel SystemOct 2025 · ODI 11694791Details +

The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. The VIN was not available.

Reported
Oct 2025
Incident date
Oct 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11694791 at NHTSA →
Back Over PreventionSep 2025 · ODI 11688956Details +

rear view camera display when vehicle is in reverse will intermittently turn blue or black which renders the rear view camera useless. and at times will state camera unavailable. vehicle is a 2021 ford bronco built on june 15, 2021 at ford Michigan build plant. i have contacted ford related to this concern as i believe that the vehicle should fall under recall 23s48 for rear camera replacement, and 25s49 for module updates related to rear camera display. the vehicle year, build date, assembly plant and symptoms all fit within the parameters of recall. note that i also have a 2022 bronco that these recalls are active on for the same concerns, the concern happens 7-8 times a week for the last 4-5 months. dealership has contacted ford sssc team about getting recalls activated on this vehicle and they are given the most basic responses stating that this vehicle is not included due to "certain model year vehicles" even though the vehicle is clearly within the model years outlined in both recalls. the rear view camera intermittently not working is a safety issue as it can stop working at any time when you would be using it to reverse. thank you for your time and consideration when investigating this concen.

Reported
Sep 2025
Incident date
Sep 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11688956 at NHTSA →
Fuel/Propulsion SystemSep 2025 · ODI 11688591Details +

In August while driving at highway speed on I-94, the engine started to stall in traffic with no warning lights or indicators. Outside temperature was in the mid 80’s. Had to carefully pull over and restart the vehicle, it continued to intermittently stall. After turning ignition off and restarting it cleared up. This is the third time this has happened in traffic at highway speeds. Once in June, once in July and this time in August. There is a recall for this, but it is concerning to drive on the highway.

Reported
Sep 2025
Incident date
Aug 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11688591 at NHTSA →
SuspensionSep 2025 · ODI 11685912Details +

The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA Campaign Number: 25V025000 (SUSPENSION); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.

Reported
Sep 2025
Incident date
Jan 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11685912 at NHTSA →
Electrical SystemAug 2025 · ODI 11683687Details +

I have been getting a message that my blind spot and cross traffic alert deactivated because trailer is attached. I have never had a trailer attached but do have a trailer hitch- the dealer said Ford refuses to pay to have it fixed because the bumper to bumper warranty is out. the car has been garaged and has only 9,000 miles on it. This is a safety issue that I think they should cover as I have no blind spot or cross traffic warnings.

Reported
Aug 2025
Incident date
Aug 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11683687 at NHTSA →
Fuel SystemAug 2025 · ODI 11681725Details +

The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA Campaign Number: 25V455000 (FUEL SYSTEM, GASOLINE). The local dealer was contacted; however, the contact was informed that parts were not yet available for the recall repair. The vehicle was not repaired. The manufacturer was contacted about parts availability. The contact had not experienced a failure.

Reported
Aug 2025
Incident date
Aug 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11681725 at NHTSA →
EngineAug 2025 · ODI 11679626 · crashDetails +

Ford has issued a recall (24S55) stating the Intake valves on the ford bronco with engine2.7L and 3.0L will harden and crack or break and loss of power. I had the same issue in my 2021 Ford Bronco with the 2.3L engine while I was driving in the highway I got a check engine light then it started cutting out horribly so I slowed down to pull off the road through a metal gate that was open with a cattle guard and the engine died as I was turning in and loss power steering trying to turn the wheel back in time I didn’t and ended up side swiping the pole and knocking off my side mirror and damaging my front quarter panel along with the front door. No damage to the solid metal pole. But I took my vehicle to the local ford dealership to see what the issue was and at the time they should have gotten the recall and at least put two and two together and let ford know about the issue in the 2.3L also but they didn’t mention anything about the valve being broken but said it had no compression and the spark plug diode was broke off. I’ve never seen a diode and the diodes ground hook break off on its own it’s always been broken off from being hit by something but they said it needed a whole new engine for $13,000 so I took it to another mechanic since that’s always that dealerships go to answer for everything is it needs a new engine so the new mechanic did the same stuff and also used a bore scope but instead of just saying the cylinder was bad he seen the hole in the valve and said it just needs a new head with new valves so since I needed my ride to be able to get to work and for half the price they tore it down and sure enough the valve was cracked with a hole just as they said and just like the recall (24S55) but had that dealership paid attention to safety alerts and ran the issue up with ford and let them know the same issue had happened in the bronco with the 2.3L engines also I wouldn’t be writing this right now. I’d be putting a 5 star review on their page not a 1.

Reported
Aug 2025
Incident date
Jan 2025
Mileage
Not provided
Outcome flags
Crash
Open ODI 11679626 at NHTSA →
Visibility/WiperAug 2025 · ODI 11678485Details +

While driving home in the evening I drove through a swarm of insects. I pushed the button to spray washer fluid and engage the wipers to clear the windshield. No fluid came out and the windshield became smeared there by obscuring visibility. I thought that odd as I always top off windshield washer fluid on all my vehicles as part of routine maintenance. When I arrived home I put approximately 1 gallon of fluid into the washer reservoir which quickly emptied onto the fender liner and the ground. Apparently there is a known defect with the washer fluid reservoir that causes it to split along the seam and empty its contents. I believe this could be a safety issue due to the flat upright design of the Bronco windshield making it a bug splat magnet and not being able to clear visibility. The Bronco is also marketed as an off-road vehicle and the windshield could be covered in mud or dust. There is no warning lamp for low washer fluid.

Reported
Aug 2025
Incident date
Jul 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11678485 at NHTSA →
Electrical SystemAug 2025 · ODI 11678296Details +

Windows are constantly getting uninitialized so that they don't bump down on opened to allow them to close properly with the frameless doors. This leaves a gap when closed and additionally they will automatically go all the way back down any time they are rolled all the way up. This is very hazardous when driving and needing to close the windows as you're forced to look backwards to see when they get close to the stop and release the button before it hits the top. This was reported to Ford on greater than 10 occasions since I took possession in Jan of 2022, first in March of 20222, and impacts all 4 windows. The dealer can resolve the issue by reinitializing through the computer they can plug into the vehicle and have installed some software updates as well as replaced some of the modules but the issue resurfaces a few days later. Sometimes I am able to resolve using the full reinitialization sequence that they shared with me when I had it there in April of this year but sometimes that fails. Prior to that it would eventually resolve following just a holding up and down of the button for approx. 5 secs at top or bottom. Here is a record of the occurrences with window impacted since I had it in the dealer in April of 2025. 5/2 passenger front (pf), 5/7 drivers back (db), 5/10 db, 5/12 db, 5/15 pf, 5/16 pf, 5/29 pb, 6/13 db, 6/17 pf, db, df, 7/13-7/30 pb, 7/24 db, took to dealer for restarts and software updates 7/30, 8/1 db. I kept a similar record in 2024 4/5 df, 4/6-10 db, 5/7 db, 5/18 pb, 5/22-6/6 pb, 6/6 df, 6/7 pb, 6/9-21 pb, 6/25-27 pb, 6/30-7/8 pb, 7/10-13 pb, 8/1 pb.

Reported
Aug 2025
Incident date
Mar 2021
Mileage
Not provided
Outcome flags
None reported
Open ODI 11678296 at NHTSA →
SuspensionAug 2025 · ODI 11677750Details +

The contact owns a 2021 Ford Bronco. The contact stated while driving at various speeds, the vehicle bounced uncontrollably. Additionally, the contact stated that the vehicle made an abnormal squeaking sound while driving at various speeds. The vehicle was taken to the dealer, where the cause of the failure could not be determined at first; however, as the failure worsened, and the dealer informed the contact that the VIN was included in NHTSA Campaign Number: 25V025000 (Suspension). The contact was informed that the part to do the recall repair was unavailable. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was 20,000.

Reported
Aug 2025
Incident date
Mar 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11677750 at NHTSA →
Electrical SystemJul 2025 · ODI 11676692Details +

Cross traffic and blind spot monitoring/alert failed. Electrical wiring failed due to rubbing on the rear bumper causing failure of blind spot alert and cross traffic alert systems. Reliance on these systems is critical to safe operation of the vehicle.

Reported
Jul 2025
Incident date
Jul 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11676692 at NHTSA →
StructureJul 2025 · ODI 11676532Details +

Component/System Involved: Molded-in-Color (MIC) Hardtop – Composite Roof Panel What happened: The molded-in-color (MIC) hardtop on my 2021 Ford Bronco (2-door) has developed multiple visible stress cracks above the passenger-side window. These are not surface scratches — they are embedded, structural fractures in the composite roof material. The cracks have formed under normal, garage-kept driving conditions at just over 10,400 miles and continue to worsen. Safety risk: I am concerned these cracks pose a potential safety risk, particularly involving water intrusion during rainfall or car washes. The affected area is directly above the front-row passenger seat and adjacent to electrical systems, including interior lighting and airbags. If water penetrates the roof structure, it could lead to mold, short circuits, degraded visibility, or electrical malfunction — especially under motion. Additionally, the structural integrity of the hardtop could be compromised in a rollover scenario. Inspection history: A Ford dealership in Winchester VA acknowledged this is a known issue and stated they had replaced multiple hardtops for the same defect. However, they declined to inspect my vehicle due to the warranty having recently expired. Ford Motor Company also reviewed the issue but denied coverage without inspecting the vehicle. Manufacturer acknowledgment: Ford delayed delivery of my Bronco by over a year due to widespread MIC hardtop defects. Despite that delay, the same failure has now occurred in my vehicle, just beyond the warranty period and with low mileage. Inspection availability: The vehicle and affected hardtop are available for inspection upon request. I have detailed photographs showing the extent and location of the cracks. Symptoms and warnings: There were no warning lights or error messages prior to the appearance of the defect. The cracks appeared gradually and became visibly obvious in June 2025.

Reported
Jul 2025
Incident date
Jun 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11676532 at NHTSA →
Electrical SystemJul 2025 · ODI 11676334Details +

While driving and completely randomly, multiple critical errors appear on the display, and vehicle goes into limp mode. The errors is play in order as follows: 4x4 Off -Service Vehicle Soon -Service advance Trac -Check 4x4 -Pre-collision assist not available -Service advance track After the errors appear, the vehicle goes into limp mode, no longer being responsive to the accelerator pedal. After putting the vehicle in park and turning it off, then restarting, the vehicle works with no errors. After 5 or so minutes this happens again. It has occured multiple times while driving, placing me in dangerous situation, because once in limp mode, I'm unable to accelerate to the side of the road. By vehicle has been at a Ford dealership for over 8 weeks now. The dealership is able to reproduce this issue. They have done some exploratory repairs by replacing the pedal assembly and throttle body but the problem remains. They're unable to diagnose what is causing the issue. Instead they are denying warranty claims and are replacing the ECM and engine wiring harness at my expense. While this most certainly repair this unknown electrical problem and will get my vehicle safely working, this critical issue will remain under diagnosed.

Reported
Jul 2025
Incident date
May 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11676334 at NHTSA →
SuspensionJul 2025 · ODI 11676360Details +

I have a 2021 ford bronco and the rear shock absorbers are both bad on my car it is dangerous to drive I have taken it to 2 different ford dealerships one in Morgantown wv and one in fairmont wv and was told there was nothing they could do about it. Then I contacted ford motor company and spoke to someone and was told there was nothing they could do and the vehicle was safe to drive although it states in the recall it increases risk of crash. I was told to file a complaint and on top of all that they won’t give me an inspection sticker. When you hit a pothole bump or any other obstruction is throws the rear end of the car out from under you and is terrifying. Now there is a recall on the fuel pump I havnt exactly experienced this personally that I’m aware of. Thirdly I was in an accident just last month I rear ended someone on the interstate going about 65 and the air bags did not deploy. In summary it’s absurd that ford is allowing people to make payments on vehicles with their hard earned money they one are unsafe and two have nothing but issues and are unwilling to do anything about it.

Reported
Jul 2025
Incident date
Jul 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11676360 at NHTSA →
SuspensionJul 2025 · ODI 11675749Details +

I am filing a complaint regarding the mishandling of a safety recall on my 2021 Ford Bronco, serviced through Legacy Ford in Corbin, KY. My vehicle currently has four active recalls. One, Campaign 25S01/25V025, involves corrosion and possible failure of the rear shock absorbers. Although this recall was issued in January 2025 and officially appears in my Ford account, parts were unavailable when I contacted Legacy Ford. Ford’s recall line assured me that I would receive a loaner vehicle and/or temporary fix, but the dealership denied this. In fact, a Legacy Ford rep told my husband to “go to the junkyard” for replacement shocks. I called Ford’s Executive Customer Service to escalate the situation. I was told the campaign was still considered an “Advanced Recall” (despite its official status) and that they could not override the dealership’s refusal to provide assistance. This created a deeply unsafe situation—my husband and I experienced two near-accidents due to rear suspension instability, while our toddler was in the vehicle. After waiting weeks with no resolution and no loaner, my husband had to repair the issue himself just to make the car drivable. We received no reimbursement or follow-up, and today, three of the four recalls remain open with no solution available. I am requesting a formal review of Legacy Ford’s actions, communication, and refusal to assist with a documented safety issue. I would also like to be contacted by someone at Ford with the authority to resolve this matter appropriately.

Reported
Jul 2025
Incident date
Jul 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11675749 at NHTSA →
Fuel SystemJul 2025 · ODI 11674987Details +

The contact owns a 2021 Ford Bronco. The contact received notification of NHTSA Campaign Number: 25V455000 (Fuel System, Gasoline); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

Reported
Jul 2025
Incident date
Jul 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11674987 at NHTSA →
EngineJul 2025 · ODI 11675173Details +

I was notified that there is a safety recall on my vehicle and there is no remedy available. I am concerned because of the issue may cause me to stall and likely crash. This is very concerning . I am not sure why there’s not a remedy. I hope there is soon. Please tell me what can be done as soon as possible.

Reported
Jul 2025
Incident date
Jul 2025
Mileage
Not provided
Outcome flags
None reported
Open ODI 11675173 at NHTSA →

This page shows the latest 50 reports to keep it usable. The count above includes every complaint NHTSA has returned for this model year.

Recalls(19)

Open a recall to read what NHTSA says is wrong, what can happen, and how it gets fixed. Check the VIN and remedy eligibility with a dealer; federal no-charge requirements have an age limit, though a manufacturer may offer more coverage.

StructureDec 2026 · 26V299000Details +

Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles. The 3-door and 5-door Molded-In-Color (MIC) hardtop roof panels may have been manufactured improperly, which can allow sections of the outer roof panel to separate and detach from the vehicle.

Risk: A detached section of roof can create a road hazard, increasing the risk of a crash.

Remedy: Dealers will inspect and replace the hard top as necessary, free of charge. Interim letters, notifying owners of the safety risk were mailed May 28, 2026. Additional letters will be sent once the remedy is available, anticipated in November 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S32. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on May 12, 2026.

Open full NHTSA recall record →
Back Over PreventionMar 2026 · 26V124000Details +

Ford Motor Company (Ford) is recalling certain 2021-2026 Ford Bronco and 2021-2024 Ford Edge vehicles. The Accessory Protocol Interface Module (APIM) may overheat and shutdown, which can prevent the rearview camera image from displaying as intended.

Risk: A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.

Remedy: The APIM software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed April 13, 2026. Owners may contact Ford Customer Service at 1-866-436-7332. Ford's number for this recall is 26S09. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on March 5, 2026.

Open full NHTSA recall record →
EquipmentOct 2025 · 25V685000Details +

Ford Motor Company (Ford) is recalling certain 2016-2019 Lincoln MKC, 2016-2023 Explorer, 2019-2020 Fusion, 2019-2024 Ranger, 2020-2022 Lincoln Corsair, Escape, 2021-2024 Bronco, Bronco Sport, and 2022-2024 Maverick vehicles. The engine block heater may crack and develop a coolant leak, causing it to short circuit when the block heater is plugged in.

Risk: An electrical short circuit can increase the risk of a fire.

Remedy: Owners are advised not to plug in their block heater until the vehicle is remedied. Dealers will replace the block heater, free of charge. Owners will also have a alternative option to replace engine block heater element with a threaded blanking plug, and remove the block heater electrical cord. Interim letters, notifying owners of the safety risk, were mailed December 3, 2025. Additional letters will be sent once the final remedy is available, anticipated September 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SA4. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on October 15, 2025.

Open full NHTSA recall record →
Back Over PreventionSep 2025 · 25V312000Details +

Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were repaired incorrectly under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Risk: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.

Remedy: Dealers will update SYNC module software, free of charge. Owner notification letters were mailed June 18, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C14.

Open full NHTSA recall record →
Back Over PreventionSep 2025 · 25V315000Details +

Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.

Risk: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.

Remedy: The accessory protocol interface module (APIM) software will be updated by a dealer or through an over-the-air update, free of charge. This will be a phased campaign, with the remedy becoming available in different phases based on model and model years. Interim letters notifying owners of the safety risk were mailed on June 26, 2025. Additional letters will be mailed once the final remedy is available on each phase. Owner notification letters were sent on October 8, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S49.

Open full NHTSA recall record →
Fuel SystemJul 2025 · 25V455000Details +

Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco, Explorer, Lincoln Aviator, F-250 SD, F-350 SD, F-450 SD, F-550 SD, 2021-2022 Lincoln Navigator, Mustang, F-150, and 2022 Expedition vehicles. The low-pressure fuel pump may fail, which can result in an engine stall while driving.

Risk: An engine stall increases the risk of a crash.

Remedy: Dealers will replace the low pressure fuel pump on super duty vehicles and update the powertrain control module (PCM) software on all other affected vehicles, free of charge. Interim notification letters notifying owners of the safety risk were mailed July 16, 2025. Second letters will be sent once the remedy is available, anticipated 2nd Quarter 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S75.

Open full NHTSA recall record →
Back Over PreventionOct 2023 · 23V165000Details +

Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously remedied under recall 22V-825. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Risk: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.

Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 28, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C05.

Open full NHTSA recall record →
Latches/Locks/LinkagesOct 2022 · 22V411000Details +

Ford Motor Company (Ford) is recalling certain four-door 2021-2022 Bronco vehicles. The passenger-side rear door may be opened from inside of the vehicle when the child safety lock is in the "ON" position.

Risk: A malfunctioning child safety lock increases the risk of injury to a child occupant.

Remedy: Dealers will inspect the passenger-side child safety locks door child safety lock and latch, and replace them, if necessary, free of charge. Owner notification letters were mailed June 28, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S44.

Open full NHTSA recall record →
Back Over PreventionMar 2022 · 22V825000Details +

Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with rearview camera systems and 8-inch screen displays. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Risk: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.

Remedy: The SYNC module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed on March 25, 2024. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22C27.

Open full NHTSA recall record →
Air BagsJan 2021 · 21V770000Details +

Ford Motor Company (Ford) is recalling certain 2021 Bronco vehicles. During passenger air bag deployment, an air bag vent could open prematurely and result in an improper deployment. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

Risk: Improper air bag deployment increases the risk of injury during a crash.

Remedy: Dealers will replace the passenger air bag, free of charge. An interim owner notification letter was mailed on November 24, 2021. A second notice announcing the remedy is available was sent on July 8, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21C23.

Open full NHTSA recall record →
Forward Collision Avoidance · 21V982000Details +

Ford Motor Company (Ford) is recalling certain 2021 Ranger and Bronco vehicles. The cruise control radar module was misaligned during production.

Risk: A misaligned radar module may prevent the vehicle from maintaining a safe distance from other vehicles when adaptive cruise control is active. In addition, the automatic emergency braking (AEB) system may react slowly, or not react at all, during a pre-collision assist braking event. Any of these scenarios can increase the risk of a crash.

Remedy: Dealers will adjust the angle of the cruise control radar module, free of charge. Owner notification letters were mailed January 21, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S52.

Open full NHTSA recall record →
Air Bags · 22V928000Details +

Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles. The right or left side impact sensors may not be properly secured to the vehicle.

Risk: An improperly secured side impact sensor may cause the air bags to unintentionally deploy, or not to deploy as intended, increasing the risk of injury in a crash.

Remedy: Dealers will inspect the side impact sensor attachments and repair, as necessary, free of charge. Owner notification letters were mailed January 20, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S77.

Open full NHTSA recall record →
Seat Belts · 23V358000Details +

Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco vehicles built with the 5-Door body style. The first-row seat belt latch plates may be difficult to access from their stowed position. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

Risk: Difficulty accessing the seat belt latches may result in occupants not wearing their seat belts, increasing the risk of injury in a crash.

Remedy: Dealers will add a sliding clip latch stop to the driver and front passenger seat belts, free of charge. Interim owner notification letters notifying owners of the safety risk were mailed July 14, 2023. Owner letters informing owners that parts are available were mailed on October 2, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23C16.

Open full NHTSA recall record →
Back Over Prevention · 23V598000Details +

Ford Motor Company (Ford) is recalling certain 2020-2023 Lincoln Aviator, 2018-2021 Lincoln Navigator, 2022-2023 Ford Transit, and 2021 Ford Bronco vehicles. The rearview camera, or 360-degree view camera if equipped, may not display a rearview image when the vehicle is placed in reverse.

Risk: Loss of the rearview camera image can reduce the driver's rear visibility, increasing the risk of a crash.

Remedy: Dealers will replace the rearview camera, and update the software and wiring as necessary, free of charge. Owner notification letters were mailed November 20, 2023 to Lincoln owners. Ford vehicle owners notification letters were mailed March 4, 2024. Ford remedy parts are anticipated 2nd Quarter 2024. Ford's number for this recall is 23S48.

Open full NHTSA recall record →
Engine And Engine Cooling · 24V635000Details +

Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine. The engine intake valves may break while driving, which can result in engine failure and a loss of drive power.

Risk: A loss of drive power increases the risk of a crash.

Remedy: Dealers will perform an engine cycle test and replace the engine as necessary, free of charge. Owner notification letters were mailed July 3, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 24S55.

Open full NHTSA recall record →
Suspension · 25V025000Details +

Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco vehicles. The rear shock absorbers may corrode and fail, resulting in detachment of the external reservoir.

Risk: An external reservoir that detaches from a vehicle can create a road hazard, increasing the risk of a crash.

Remedy: Dealers will replace the rear shock absorbers, as necessary free of charge. Owner notification letters were mailed August 15, 2025. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25S01.

Open full NHTSA recall record →
Seats · 25V721000Details +

Ford Motor Company (Ford) is recalling certain 2021-2023 Bronco vehicles. The front seats may have a loose or dislodged seat frame height-adjust pivot bolt.

Risk: A seat with a dislodged bolt may not properly restrain an occupant in a crash, increasing the risk of injury.

Remedy: Dealers will inspect and replace the pivot links and bolts as necessary, free of charge. Owner notification letters were mailed April 28, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25SB5. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning October 28, 2025.

Open full NHTSA recall record →
Back Over Prevention · 25V888000Details +

Ford Motor Company (Ford) is recalling certain 2021-2022 Bronco vehicles equipped with 8-inch SYNC infotainment screens that were previously repaired incorrectly under recall number 23V165. The rearview camera image may still be displayed after a backing event has ended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Risk: A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver, increasing the risk of a crash.

Remedy: Dealer will update the SYNC module software ,free of charge. Owner notification letters were mailed January 28, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 25C72. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning January 30, 2026.

Open full NHTSA recall record →
Power Train · 26V236000Details +

Ford Motor Company (Ford) is recalling certain 2021-2025 Bronco vehicles. The transmission to transfer case joint may be misaligned due to an incorrectly performed previous repair, which could lead to wear of the transmission output shaft splines and transfer case input splines.

Risk: Excessive wear of the transmission and transfer case splines may result in a loss of drive power or vehicle rollaway, increasing the risk of a crash.

Remedy: Dealers will inspect the transmission to transfer case joint and replace the transmission and transfer case as necessary, free of charge. Owner notification letters were mailed July 9, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S26. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on April 15, 2026.

Open full NHTSA recall record →

A campaign can apply to this model year without being incomplete on a specific vehicle. Check the VIN with NHTSA or a dealer to confirm whether a particular car needs repair.

Investigations

4 NHTSA investigations on record

Investigations are agency reviews, not findings that a vehicle is defective.

Low-pressure fuel pump failure

On July 29, 2024, the Office of Defects Investigation (ODI) opened PE24019 to investigate complaints of low-pressure fuel pump failures in MY 2021 Ford Bronco vehicles. Some consumers reported that the failure occurred without warning while driving, resulting in a complete loss of motive power with no ability to restart the engine. Ford determined that several other vehicle models contain low-pressure fuel pumps substantially similar to the 2021 Ford Bronco, including the 2022-2023 Ford Bronco, 2018-2023 Ford F-150, 2022-2023 Ford Expedition, 2019-2023 Lincoln Navigator, 2020-2023 Ford F-250-F-550, 2024 Ford Super Duty Chassis Cab, 2024-2025 Ford Ranger, 2020-2023 Ford Explorer, 2020-2023 Lincoln Aviator, and 2021-2025 Ford Mustang. ODI's investigation found that the affected vehicles may lose fuel pressure and flow from the fuel delivery module (consisting of a low-pressure fuel pump, jet pump, reservoir, and other parts) due to a low-pressure pump failure. This can cause the engine to stall while driving. The root cause is reduced internal clearance in the fuel pump, increasing friction and sensitivity to vapor lock. Fuel blockage from contamination inside the jet pump also contributed to the failure. Ford stated that the contamination source was unknown. On July 7, 2025, Ford filed recall 25V-455 for certain 2021-2023 Ford F-550 SD/F-450 SD/F-350 SD/F-250 SD, 2021-2022 Lincoln Navigator, 2021-2022 Ford Mustang, 2021-2022 Ford F-150, 2021-2023 Ford Explorer, 2022 Ford Expedition, and 2021-2023 Ford Bronco vehicles produced between July 1, 2021, and July 30, 2022. The recall also included certain 2021-2023 Lincoln Aviator produced between July 1, 2021, and December 21, 2022. Ford explained in its recall filingthat the production dates used for the recall were based on changes in the manufacturing process. Specifically, Ford determined that in June 2021, the supplier modified the jet pump manufacturing process, producing fuel pump chambers with a lower-than-specified internal clearance. In July 2022, the supplier implemented corrective actions to the manufacturing process by adding two additional vacuum pumps to reduce contamination during the production of the jet pump. ODI has identified approximately 1,000 reports involving vehicles covered in this investigation but excluded from recall 25V-455. However, even with such reports, these vehicles experienced comparatively lower failure rates than the vehicles that are subject to Recall 25V-455. Ford has explained that these vehicles were excluded from the recall population because they did not experience the manufacturing changes that prompted the recall. Specifically, according to Ford, vehicles built before July 1, 2021 (the recall production start date), were not affected by the supplier’s change to the jet pump manufacturing process. Even after closing this investigation, ODI will continue to monitor complaints for vehicles excluded from recall 25V-455 to consider whether they exhibit the same risks as the vehicles encompassed by the recall. The recall remedy is currently under development. In view of Ford’s recall action, ODI is closing this Preliminary Evaluation, but will continue to monitor the issue as a remedy is developed and implemented. ODI will take additional action if warranted by future circumstances. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

Loss of Motive Power

On July 22, 2022, the Office of Defects Investigation (ODI) granted a Defect Petition (DP22001) and opened a Preliminary Evaluation (PE22007) to investigate allegations of loss of motive power in model year (MY) 2021 Ford Bronco vehicles equipped with 2.7L EcoBoost engines. Complainants were reporting sudden engine failure while driving resulting in a loss of motive power, often without the ability to restart. During PE22007, the cause of engine failure and loss of motive power in the subject vehicles was determined to be intake valve fracture, and the full scope of vehicles affected by the subject defect was identified as all MY 2021-2022 Ford and Lincoln models equipped with either the 2.7L or 3.0L EcoBoost engines, referred to as the “Nano” engine family.  If an intake valve fractures in the subject engines, it may drop into the cylinder and contact the piston, often resulting in catastrophic engine damage. On September 29, 2023, PE22007 was upgraded to an Engineering Analysis (EA23002) to further investigate the subject defect across the full scope of affected vehicles. During EA23002, ODI visited Ford facilities to review technical information related to intake valve fracture in “Nano” engines, coordinated with NHTSA’s Vehicle Research and Testing Center (VRTC), and analyzed updated field data relating the subject defect. Forensic analysis of fractured intake valves demonstrated that the defective components exhibited “grinding burn” or out of specification hardness in the area of the keeper grooves. The presence of grinding burn is evidence that during the groove grinding phase of production, the temperature of the valve became sufficiently high to alter the microstructure of the material and is indicative that the valve supplier’s manufacturing processes were not within control specifications. Grinding burn results in a hard, brittle microstructure and high residual stresses toward the surface of the valve. Through normal engine loading, a valve with grinding burn will likely fracture at the area of highest vulnerability, which is the third keeper groove. In its response to the EA23002 Information Request (IR) letter, Ford provided evidence of 396 customer complaints (including field reports), 825 warranty claims, and 936 engine exchanges. When considering both ODI and manufacturer failure report data, there have been reports representing 1066 unique vehicles within the subject vehicle population. Analysis of the failure report data demonstrates that vehicles equipped with potentially defective intake valves were built within a production “spike period” of May 2021 – October 2021. The beginning of the spike period corresponds to a ramp up in production at the valve supplier manufacturing facility, and the end of the spike period aligns with the implementation of several mid-production process improvements and the decision to change the metal alloy used to produce intake valves from “Silchrome Lite” to “Silchrome 1”. Ford began investigating the subject defect in July 2021, determined the root cause, and took corrective measures for the new production vehicles. Analysis of the failure report data demonstrates that these corrective actions were successful in eliminating the risk of intake valve fracture for subject vehicles produced after October 2021. However, Ford did not take any field action to address vehicles produced during the spike period, and in the several months following the implementation of the production changes, a significant number of field failures continued to occur. It is Ford’s assessment that not all valves produced during the spike period are defective, and that failures associated with the subject defect occur at low time in service. Analysis of the failure report data demonstrates that the vast majority of failures have occurred before 20,000 miles with over half of all reported failures occurring before 5,000 miles. The rate of reported failures related to the subject defect has steadily decreased since November 2021. ODI coordinated with NHTSA’s National Center for Statistics and Analysis (NCSA) to conduct statistical analysis and predict the number of future failures associated with the subject defect. The results of this analysis, and the trends identified through the failure report data are generally consistent with Ford’s assessment that defective intake valves will likely fail at a low time in service and indicate that the majority of subject vehicles equipped with defective valves have already experienced a failure. On August 23, 2024, Ford submitted recall 24V635 for subject vehicles equipped with “Nano” engines and built within the production spike period identified above (total population 90,736 vehicles). The remedy includes an inspection at a Ford/Lincoln dealership where the lifetime engine cycles of the vehicle will be determined. If a vehicle does not meet a threshold for lifetime engine cycles, the dealership will conduct a high RPM engine cycle accumulation procedure, which aims to identify if the vehicle is equipped with defective intake valves. Any vehicle that fails the accumulation procedure will receive an engine replacement under the recall. In addition to recall 24V635, Ford has stated that it will launch customer satisfaction campaign 24N12, which will provide extended warranty coverage to the subject vehicles through the earlier of 10 years or 150,000 miles. In view of the recall action being taken by Ford, ODI is closing this Engineering Analysis. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

Loss of motive power due to valve intake failure on Ford Bronco vehicles.

The Office of Defects Investigation (ODI) received a petition dated March 16, 2022, requesting an investigation regarding allegations of defective intake valves in model year (MY) 2021 Ford Bronco vehicles equipped with the 2.7L Eco-boost (“Nano”) engines.  The petitioner alleged these vehicles are experiencing loss of motive power at any highway speeds with no-restart as a result of catastrophic engine failures.  To date ODI is aware of 42 submitted Vehicle Owner Questionnaires (VOQ’s) alleging a loss of motive power. On July 22, 2022, ODI opened a Preliminary Evaluation (PE22-007) to investigate allegations of stalling/loss of motive power on the subject vehicles.  Upon receiving Ford’s Information Request (IR) response, ODI learned Ford was aware of 110 consumer complaints (including field reports), 125 warranty claims and 136 engine exchanges related to the 2021 Ford Bronco.  Ford’s response indicated these failures are across the “Nano” engine family, which includes both the 2.7L and 3.0L EcoBoost engine variants with a total estimated population of 708,837 vehicles. Additionally, ODI became aware that the subject engines contained intake valves that were manufactured out of a specific alloy known as “Silchrome Lite”, which can become excessively hard and brittle if an over-temperature condition occurs during machining of the component. The overly brittle intake valve can fracture at the keeper grove causing the intake valve to freely contact the piston, resulting in catastrophic engine failure.  A design modification was implemented in October 2021, which changed the intake valve material to a different alloy known as “Silchrome 1”, that is less susceptible to over-temperature during machine grinding. ODI is upgrading this PE to an Engineering Analysis (EA23-002) to better understand the failure mechanism identified by Ford and to ascertain the complete scope.  To review the reports cited in the attached Closing Resume ODI Report Identification Number document, go to NHTSA.gov

Loss of Motive Power

The Office of Defects Investigation (ODI) received three petitions on March 17, March 18, and March 29, 2022, which requested a defect investigation into an alleged defect of the valves on model year (MY) 2021 Ford Bronco vehicles equipped with the 2.7L Eco-boost engines. The petitioners alleged that MY 2021 Ford Broncos vehicles are experiencing loss of motive power at highway speeds with no-restart due to catastrophic engine failures.On May 27, 2022, ODI opened this Defect Petition to evaluate whether to grant or deny the petition.ODI has identified 26 Vehicle Owners Questionnaires (VOQs) that relate to the alleged defect in the subject vehicles. Based on ODI's review of the applicable materials, including VOQs, NHTSA has decided to grant the petition and open a Preliminary Evaluation (PE22-007) to assess the scope, frequency, and potential safety-related consequences of the alleged defect.Accordingly, this Defect Petition is closed.The ODI complaints cited above can be reviewed at NHTSA.gov under the following ODI numbers:11448171, 11448461, 11450659, 11450702, 11450737, 11450788, 11450871, 11450879, 11451158, 11451503, 11451957, 11452074, 11452692, 11453669, 11453933, 11454098, 11455294, 11456219, 11456713, 11459262,11460124, 11460125, 11461178, 11463199, 11463296, 11464516.

Crash-test ratings

2021 Ford Bronco 2DR SUV 4WD NHTSA source

Overall
Not rated
Frontal
Not rated
Side
Not rated
Rollover

2021 Ford Bronco 4DR SUV 4WD NHTSA source

Overall
Not rated
Frontal
Not rated
Side
Not rated
Rollover

Source: NHTSA New Car Assessment Program (NCAP).

Fuel economy by trim

TrimEngineDrivetrainCityHwyCombined
Bronco 4WD2.3L 4-cylPart-time 4-Wheel Drive202221
Bronco 4WD2.3L 4-cylPart-time 4-Wheel Drive202221
Bronco 4WD2.7L 6-cylPart-time 4-Wheel Drive182019
Bronco Sasquatch 4WD2.3L 4-cylPart-time 4-Wheel Drive181818
Bronco Black Diamond 4WD2.3L 4-cylPart-time 4-Wheel Drive171918
Bronco Black Diamond 4WD2.3L 4-cylPart-time 4-Wheel Drive181818
Bronco Sasquatch 4WD2.7L 6-cylPart-time 4-Wheel Drive171717
Bronco Badlands 4WD2.3L 4-cylPart-time 4-Wheel Drive161817
Bronco Badlands 4WD2.3L 4-cylPart-time 4-Wheel Drive181717
Bronco Badlands 4WD2.7L 6-cylPart-time 4-Wheel Drive171817

EPA laboratory estimates by trim and engine. Actual mileage varies with driving, weather, load, and maintenance. EPA source.

Before you buy

Useful next checks

Federal records tell you about patterns. These checks can tell you more about the specific car in front of you.

These are affiliate links. TireKick may earn a fee if you use one.

Compare the year-by-year record

Open another year for its own evidence-gated decision. TireKick does not crown a best year from raw complaint totals.

2021 Ford Bronco: frequently asked

What does the complaint record show for the 2021 Ford Bronco?

Owners filed 218 NHTSA complaints about the 2021 Ford Bronco. This is raw owner-reported complaint volume with no production or exposure normalization, so it is not a reliability score or a best/worst-year ranking.

What are the most common problems on the 2021 Ford Bronco?

The most-reported problem areas are Engine (27% of complaints) and electrical system (12%).

How many recalls does the 2021 Ford Bronco have?

19 recalls have been issued that affect the 2021 Ford Bronco, covering components such as structure. Check the VIN with NHTSA and ask a dealer to confirm remedy eligibility; federal no-charge requirements have an age limit, though manufacturers may offer more coverage.

What gas mileage does the 2021 Ford Bronco get?

The EPA rates the 2021 Ford Bronco between 17 and 21 mpg combined, depending on trim and drivetrain.