2017 Ford F-150 problems reported near 100,000 miles

The records describe a possible crash, fire, injury, or loss of control.

“Ford Motor Company (Ford) is recalling certain 2017-2018 Ford F-150 and 2018 Ford Expedition and Mustang and Lincoln Navigator vehicles equipped with 10-speed automatic transmissions. A roll pin may not have been installed in the transmission, potentially causing a loss of the "Park" function. Despite the transmission shift lever being placed in 'Park' and the instrument panel display indicating 'Park,' the vehicle may roll away after it has been exited if the parking brake has not been applied, increasing the risk of injury or a crash. Ford will notify owners, and dealers will inspect the transmission to make sure it has the roll pin, installing one if it is missing, free of charge. The recall began on April 13, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S09.”

The records describe a possible crash, fire, injury, or loss of control.

“Ford Motor Company (Ford) is recalling certain 2015-2019 Ford F-150 and 2017-2019 Ford F-250 Super Duty, F-350 Super Duty, F-450 Super Duty, and F-550 Super Duty pick-up trucks equipped with an engine block heater. Water and contaminants may get into the block heater cable's splice connector causing corrosion and damage. When the heater is plugged in, prolonged corrosion could cause a resistive short, increasing the risk of overheated or melted wiring which can increase the risk of a fire. Ford will notify owners, and dealers will disable the block heater cable, free of charge. Once parts are available, Dealers will replace the engine block heater cable, free of charge. The recall began June 3, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S45.”

The records describe a possible crash, fire, injury, or loss of control.

“Ford Motor Company (Ford) is recalling certain 2015-2019 Ford F-150 and 2017-2019 Ford F-250 Super Duty, F-350 Super Duty, F-450 Super Duty, and F-550 Super Duty pick-up trucks equipped with an engine block heater and previously remedied under recall 18V894. During the previous repair, the block heater cable's splice connector may have been damaged. A damaged cable could cause a resistive short, increasing the risk of overheated or melted wiring, increasing the risk of a fire. Ford will notify owners, and dealers will disable the engine block heater from being used. When replacement cables become available, a second notice will be mailed and dealers will replace the engine block heater cord, free of charge. The recall began May 31, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S11.”

The records describe a problem worth checking before purchase.

“Extended Warranty Coverage- In the affected vehicles, if water enters into the electrical system, it could cause the tailgate to unlatch.”

The records describe a problem worth checking before purchase.

“Extended Warranty Coverage- In the affected vehicles, if water enters into the electrical system, it could cause the tailgate to unlatch.”

The records describe a problem worth checking before purchase.

“This is a one-time repair program for vehicle owners that report unintended tailgate opening.Affected vehicles are eligible for this repair through April 3, 2030 or 150,000 miles from the warranty start date of the vehicle, whichever occurs first. If a vehicle has already exceeded the mileage limit, this extended warranty coverage will last through October 31, 2020.”

The records describe a problem worth checking before purchase.

“This is a one-time repair program for vehicle owners that report unintended tailgate opening.Affected vehicles are eligible for this repair through April 3, 2030 or 150,000 miles from the warranty start date of the vehicle, whichever occurs first. If a vehicle has already exceeded the mileage limit, this extended warranty coverage will last through October 31, 2020.”

The records describe a problem worth checking before purchase.

“Certain 2017-2020 Model Year F-150 Equipped with a 3.5L GTDI Engine Powertrain Control Module Reprogram for Cam Phaser Rattle Reports of Transmission Shudder after PCM Reprogram: Dealers are instructed to stop performing this field service action until further notice. This shudder is under investigation.”

The records describe a problem worth checking before purchase.

“Certain 2017-2020 Model Year F-150 Equipped with a 3.5L GTDI Engine Powertrain Control Module Reprogram for Cam Phaser Rattle Reports of Transmission Shudder after PCM Reprogram: Dealers are instructed to stop performing this field service action until further notice. This shudder is under investigation.”

The records describe a problem worth checking before purchase.

“Certain 2017-2020 Model Year F-150 Equipped with a 3.5L GTDI Engine Powertrain Control Module Reprogram for Cam Phaser Rattle Reports of Transmission Shudder after PCM Reprogram: Dealers are instructed to stop performing this field service action until further notice. This shudder is under investigation.”

The records describe a problem worth checking before purchase.

“In some of the affected vehicles, an undesirable noise may develop from the cam phasers in the 3.5L GTDI engine. This noise might occur as a rattle when starting the engine after the vehicle was turned off for an extended period of time or as a knocking noise when the engine is idling after it is warmed up. These concerns should be addressed by the updated calibration provided in FSA 21B10. However, for peace of mind, Ford is providing an extended warranty for customers who receive the PCM update under program 21B10 prior to December 31, 2021 and continue to experience cam phaser noise after receiving that PCM update, A cam phaser that has developed an undesirable noise does not affect the vehicle safety, performance, or emissions. ”

The records describe a problem worth checking before purchase.

“In some of the affected vehicles, an undesirable noise may develop from the cam phasers in the 3.5L GTDI engine. This noise might occur as a rattle when starting the engine after the vehicle was turned off for an extended period of time or as a knocking noise when the engine is idling after it is warmed up. These concerns should be addressed by the updated calibration provided in FSA 21B10. However, for peace of mind, Ford is providing an extended warranty for customers who receive the PCM update under program 21B10 prior to December 31, 2021 and continue to experience cam phaser noise after receiving that PCM update, A cam phaser that has developed an undesirable noise does not affect the vehicle safety, performance, or emissions. ”

The records describe a problem worth checking before purchase.

“In some of the affected vehicles, an undesirable noise may develop from the cam phasers in the 3.5L GTDI engine. This noise might occur as a rattle when starting the engine after the vehicle was turned off for an extended period of time or as a knocking noise when the engine is idling after it is warmed up. These concerns should be addressed by the updated calibration provided in FSA 21B10. However, for peace of mind, Ford is providing an extended warranty for customers who receive the PCM update under program 21B10 prior to December 31, 2021 and continue to experience cam phaser noise after receiving that PCM update, A cam phaser that has developed an undesirable noise does not affect the vehicle safety, performance, or emissions. ”

The records describe a problem worth checking before purchase.

“In some of the affected vehicles, an undesirable noise may develop from the cam phasers in the 3.5L GTDI engine. This noise might occur as a rattle when starting the engine after the vehicle was turned off for an extended period of time or as a knocking noise when the engine is idling after it is warmed up. These concerns should be addressed by the updated calibration provided in FSA 21B10. However, for peace of mind, Ford is providing an extended warranty for customers who receive the PCM update under program 21B10 prior to December 21, 2021 and continue to experience cam phaser noise after receiving that PCM update.”

The records describe a problem worth checking before purchase.

“In some of the affected vehicles, an undesirable noise may develop from the cam phasers in the 3.5L GTDI engine. This noise might occur as a rattle when starting the engine after the vehicle was turned off for an extended period of time or as a knocking noise when the engine is idling after it is warmed up. These concerns should be addressed by the updated calibration provided in FSA 21B10. However, for peace of mind, Ford is providing an extended warranty for customers who receive the PCM update under program 21B10 prior to December 21, 2021 and continue to experience cam phaser noise after receiving that PCM update.”

The records describe a problem worth checking before purchase.

“In some of the affected vehicles, an undesirable noise may develop from the cam phasers in the 3.5L GTDI engine. This noise might occur as a rattle when starting the engine after the vehicle was turned off for an extended period of time or as a knocking noise when the engine is idling after it is warmed up. These concerns should be addressed by the updated calibration provided in FSA 21B10. However, for peace of mind, Ford is providing an extended warranty for customers who receive the PCM update under program 21B10 prior to December 21, 2021 and continue to experience cam phaser noise after receiving that PCM update.”