We matched this check to 2.5L · 4-Wheel Drive · Automatic (S6) · CX-5 4WD.
What may matter at this mileage
Reports of Exterior Lighting owner reports landed in this car’s mileage range. Put it at the top of the inspection list.
Focus the inspection on: Exterior Lighting owner reports.
Now
1 yr12,000 mi
3 yr •36,000 mi
5 yr60,000 mi
Exterior Lighting owner reportsYour mileage may enter the reported range
Manufacturer warranty extensionYour mileage may enter the reported range
Manufacturer warranty extensionYour mileage may enter the reported range
Manufacturer warranty extensionYour mileage may enter the reported range
Manufacturer warranty extensionYour mileage may enter the reported range
mileage range in owner reports
If you keep the car
1 yrAbout 12,000 miles. This stays below the mileage range in the reviewed reports.
3 yr (yours)About 36,000 miles. This reaches the reported mileage range for Exterior Lighting owner reports.
5 yrAbout 60,000 miles. This reaches the reported mileage range for Exterior Lighting owner reports.
12,000 annual miles · 3-year ownership horizon · Service history is unknown unless verified by the buyer. These ranges come from owner reports. They are not failure rates or predictions.
Mileage ranges in owner reports for each listed problem.
Problem
Severity
Lower mileage
Middle mileage
Higher mileage
Relation to your mileage
Exterior Lighting owner reports
Moderate severity
28,000 mi
36,000 mi
37,500 mi
Your mileage may enter the reported range
Manufacturer warranty extension
Moderate severity
34,500 mi
50,000 mi
82,000 mi
Your mileage may enter the reported range
Manufacturer warranty extension
Moderate severity
34,500 mi
50,000 mi
82,000 mi
Your mileage may enter the reported range
Manufacturer warranty extension
Moderate severity
34,500 mi
50,000 mi
82,000 mi
Your mileage may enter the reported range
Manufacturer warranty extension
Moderate severity
34,500 mi
50,000 mi
82,000 mi
Your mileage may enter the reported range
Why this answer
1Manufacturer warranty extension was reported near the mileage this car may reach. Check the car and its repair history before you buy.
2Manufacturer warranty extension was reported near the mileage this car may reach. Check the car and its repair history before you buy.
3Manufacturer warranty extension was reported near the mileage this car may reach. Check the car and its repair history before you buy.
Conditions to clear first
Manufacturer warranty extension: Ask the inspector to test the named system and record the result.
Exterior Lighting owner reports: Ask the inspector to test the named system and note any warning lights, noises, leaks, or stored codes.
Manufacturer warranty extension
Moderate severity
Evidence: High confidence
Official record covers model years 2018 through 2022.
Symptom
On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open.
Why it matters
The records describe a problem worth checking before purchase.
Mileage in the reports
In reports that included mileage, this problem showed up around 34,500 to 82,000 miles.
Based on 27 reports that included mileage. This is not a failure rate or a prediction.
What to inspect
Ask the inspector to test the named system and record the result.
Ask the inspector to check: Independent pre-purchase inspection.
What may help
Use the official record to focus the inspection and service-history review.
Sources and limitsShowHide
Source recordEvidence: High confidence
The records describe a problem worth checking before purchase.
“On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.”
The records describe a problem worth checking before purchase.
“On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.”
The records describe a problem worth checking before purchase.
“On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.”
Official record covers model years 2018 through 2022.
Symptom
Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the fail-safe thermostat installed inside of the suspected coolant control valve on certain 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 20
Why it matters
The records describe a problem worth checking before purchase.
Mileage in the reports
In reports that included mileage, this problem showed up around 34,500 to 82,000 miles.
Based on 27 reports that included mileage. This is not a failure rate or a prediction.
What to inspect
Ask the inspector to test the named system and record the result.
Ask the inspector to check: Independent pre-purchase inspection.
What may help
Use the official record to focus the inspection and service-history review.
Sources and limitsShowHide
Source recordEvidence: High confidence
The records describe a problem worth checking before purchase.
“Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the fail-safe thermostat installed inside of the suspected coolant control valve on certain 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 2018-2021 Mazda6 and 2020-2023 CX-30 vehicles. The warranty coverage for an applicable repair has been extended to 15 years (180 months) /150,000 miles (240,000 km) whichever comes first, from the original warranty start date. If you are a recipient of this notice, your vehicle is included in this warranty extension program. What is the problem? On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.”
The records describe a problem worth checking before purchase.
“Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the fail-safe thermostat installed inside of the suspected coolant control valve on certain 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 2018-2021 Mazda6 and 2020-2023 CX-30 vehicles. The warranty coverage for an applicable repair has been extended to 15 years (180 months) /150,000 miles (240,000 km) whichever comes first, from the original warranty start date. If you are a recipient of this notice, your vehicle is included in this warranty extension program. What is the problem? On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.”
The records describe a problem worth checking before purchase.
“Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the fail-safe thermostat installed inside of the suspected coolant control valve on certain 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 2018-2021 Mazda6 and 2020-2023 CX-30 vehicles. The warranty coverage for an applicable repair has been extended to 15 years (180 months) /150,000 miles (240,000 km) whichever comes first, from the original warranty start date. If you are a recipient of this notice, your vehicle is included in this warranty extension program. What is the problem? On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.”
Official record covers model years 2018 through 2022.
Symptom
SSPD8 - Check Engine Light ON with DTC P0126:00 - WARRANTY EXTENSION For certain 2018-2025MY CX-5, 2019-2023MY Mazda3, 2019-2022MY CX-3, 2018-2021MY Mazda6, 2020-2023MY CX-30 that are equipped with the suspected coolant control valve, the warranty coverage for specific repair of
Why it matters
The records describe a problem worth checking before purchase.
Mileage in the reports
In reports that included mileage, this problem showed up around 34,500 to 82,000 miles.
Based on 27 reports that included mileage. This is not a failure rate or a prediction.
What to inspect
Ask the inspector to test the named system and record the result.
Ask the inspector to check: Independent pre-purchase inspection.
What may help
Use the official record to focus the inspection and service-history review.
Sources and limitsShowHide
Source recordEvidence: High confidence
The records describe a problem worth checking before purchase.
“SSPD8 - Check Engine Light ON with DTC P0126:00 - WARRANTY EXTENSION For certain 2018-2025MY CX-5, 2019-2023MY Mazda3, 2019-2022MY CX-3, 2018-2021MY Mazda6, 2020-2023MY CX-30 that are equipped with the suspected coolant control valve, the warranty coverage for specific repair of the fail-safe thermostat is extended to: 15 years (180 months) or 150,000 miles (240,000 km) whichever comes first, from the original warranty start date. CONDITION OF CONCERN: On certain subject vehicles, the check engine light is illuminated with DTC P0126:00 (Thermostat stuck open) stored in memory and one or more of the following symptoms may occur: - Engine takes longer to warm up. - Engine temperature gauge fluctuates. - Low coolant temperature indicator (blue) light stays on longer or turns on while driving. - Poor heater performance, especially at idle. Mazda Motor Corporation has made a significant repair change to TSB 01-003/25 which also impacts Warranty Extension Special Service Program (SSPD8). Repair Procedure Update: Effective December 8th all repairs applicable to TSB 01-003/25 or SSPD8 must follow the new repair procedure. The repair now replaces the thermostat with a dummy plug for the coolant control valve (CCV) along with a required software update for the PCM. Prior Repairs: Any repairs previously completed with the replacement of the thermostat or coolant control valve assembly does not require a re-repair unless there is a verified failure following the diagnosis in the TSB. It is expected that there will be no further repairs made for this concern once the plug and software update has been completed. Therefore, a return visit for symptoms related to the TSB or SSP must contact the Technical Hotline for assistance. VITALLY IMPORTANT!: There must be a “Software Update” record for the PCM when using MDARS or IDS. • MDARS - If there is no Software Update entry in MDARS or the Collect Diagnostic Information (ODR Update) is not completed (or both), the vehicle will not be considered repaired and the warranty claim will be rejected. • IDS – Vehicles programed with IDS must Collect Diagnostic Data, and that data must be attached to the warranty claim. If the data is not attached to the claim, the vehicle will not be considered repaired and the warranty claim will be rejected, denied or debited. Failure to complete the above will require the vehicle to return to the dealership and be re-repaired at the dealer’s expense with great inconvenience to the Mazda customer. Failure to perform the software update could also potentially damage the engine which would not be covered by warranty and would expose your dealership to the cost of repairs. ”
The records describe a problem worth checking before purchase.
“SSPD8 - Check Engine Light ON with DTC P0126:00 - WARRANTY EXTENSION For certain 2018-2025MY CX-5, 2019-2023MY Mazda3, 2019-2022MY CX-3, 2018-2021MY Mazda6, 2020-2023MY CX-30 that are equipped with the suspected coolant control valve, the warranty coverage for specific repair of the fail-safe thermostat is extended to: 15 years (180 months) or 150,000 miles (240,000 km) whichever comes first, from the original warranty start date. CONDITION OF CONCERN: On certain subject vehicles, the check engine light is illuminated with DTC P0126:00 (Thermostat stuck open) stored in memory and one or more of the following symptoms may occur: - Engine takes longer to warm up. - Engine temperature gauge fluctuates. - Low coolant temperature indicator (blue) light stays on longer or turns on while driving. - Poor heater performance, especially at idle. Mazda Motor Corporation has made a significant repair change to TSB 01-003/25 which also impacts Warranty Extension Special Service Program (SSPD8). Repair Procedure Update: Effective December 8th all repairs applicable to TSB 01-003/25 or SSPD8 must follow the new repair procedure. The repair now replaces the thermostat with a dummy plug for the coolant control valve (CCV) along with a required software update for the PCM. Prior Repairs: Any repairs previously completed with the replacement of the thermostat or coolant control valve assembly does not require a re-repair unless there is a verified failure following the diagnosis in the TSB. It is expected that there will be no further repairs made for this concern once the plug and software update has been completed. Therefore, a return visit for symptoms related to the TSB or SSP must contact the Technical Hotline for assistance. VITALLY IMPORTANT!: There must be a “Software Update” record for the PCM when using MDARS or IDS. • MDARS - If there is no Software Update entry in MDARS or the Collect Diagnostic Information (ODR Update) is not completed (or both), the vehicle will not be considered repaired and the warranty claim will be rejected. • IDS – Vehicles programed with IDS must Collect Diagnostic Data, and that data must be attached to the warranty claim. If the data is not attached to the claim, the vehicle will not be considered repaired and the warranty claim will be rejected, denied or debited. Failure to complete the above will require the vehicle to return to the dealership and be re-repaired at the dealer’s expense with great inconvenience to the Mazda customer. Failure to perform the software update could also potentially damage the engine which would not be covered by warranty and would expose your dealership to the cost of repairs. ”
The records describe a problem worth checking before purchase.
“SSPD8 - Check Engine Light ON with DTC P0126:00 - WARRANTY EXTENSION For certain 2018-2025MY CX-5, 2019-2023MY Mazda3, 2019-2022MY CX-3, 2018-2021MY Mazda6, 2020-2023MY CX-30 that are equipped with the suspected coolant control valve, the warranty coverage for specific repair of the fail-safe thermostat is extended to: 15 years (180 months) or 150,000 miles (240,000 km) whichever comes first, from the original warranty start date. CONDITION OF CONCERN: On certain subject vehicles, the check engine light is illuminated with DTC P0126:00 (Thermostat stuck open) stored in memory and one or more of the following symptoms may occur: - Engine takes longer to warm up. - Engine temperature gauge fluctuates. - Low coolant temperature indicator (blue) light stays on longer or turns on while driving. - Poor heater performance, especially at idle. Mazda Motor Corporation has made a significant repair change to TSB 01-003/25 which also impacts Warranty Extension Special Service Program (SSPD8). Repair Procedure Update: Effective December 8th all repairs applicable to TSB 01-003/25 or SSPD8 must follow the new repair procedure. The repair now replaces the thermostat with a dummy plug for the coolant control valve (CCV) along with a required software update for the PCM. Prior Repairs: Any repairs previously completed with the replacement of the thermostat or coolant control valve assembly does not require a re-repair unless there is a verified failure following the diagnosis in the TSB. It is expected that there will be no further repairs made for this concern once the plug and software update has been completed. Therefore, a return visit for symptoms related to the TSB or SSP must contact the Technical Hotline for assistance. VITALLY IMPORTANT!: There must be a “Software Update” record for the PCM when using MDARS or IDS. • MDARS - If there is no Software Update entry in MDARS or the Collect Diagnostic Information (ODR Update) is not completed (or both), the vehicle will not be considered repaired and the warranty claim will be rejected. • IDS – Vehicles programed with IDS must Collect Diagnostic Data, and that data must be attached to the warranty claim. If the data is not attached to the claim, the vehicle will not be considered repaired and the warranty claim will be rejected, denied or debited. Failure to complete the above will require the vehicle to return to the dealership and be re-repaired at the dealer’s expense with great inconvenience to the Mazda customer. Failure to perform the software update could also potentially damage the engine which would not be covered by warranty and would expose your dealership to the cost of repairs.”
Official record covers model years 2018 through 2022.
Symptom
Subject: TSB 01-001/26 Warranty and Parts Kit Update INCLUDES: Warranty Extension Program - Special Service Program (SSP) D8 Check Engine Light ON with DTC P0126:00, 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 2018-2021 Mazda6, 2020-2023 CX-30 Dear Mazda Dealer Colleagues,
Why it matters
The records describe a problem worth checking before purchase.
Mileage in the reports
In reports that included mileage, this problem showed up around 34,500 to 82,000 miles.
Based on 27 reports that included mileage. This is not a failure rate or a prediction.
What to inspect
Ask the inspector to test the named system and record the result.
Ask the inspector to check: Independent pre-purchase inspection.
What may help
Use the official record to focus the inspection and service-history review.
Sources and limitsShowHide
Source recordEvidence: High confidence
The records describe a problem worth checking before purchase.
“Subject: TSB 01-001/26 Warranty and Parts Kit Update INCLUDES: Warranty Extension Program - Special Service Program (SSP) D8 Check Engine Light ON with DTC P0126:00, 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 2018-2021 Mazda6, 2020-2023 CX-30 Dear Mazda Dealer Colleagues, Mazda Motor Corporation has made a change regarding related parts to TSB 01-001/26 which also impacts Warranty Extension Special Service Program (SSPD8). Parts Ordering and Warranty Claims: Effective March 5, 2026 only the related parts kit PYY2-15-SAY can be ordered and claimed for any repair. The two separate parts PYFB-15-169 and PE13-15-296 can no longer be claimed with repaired dates of March 5, 2026 and later. There is no change to the main part, the Plug PYY3-15-SA1. We have updated the TSB 01-001/26 and SSPD8 Repair Procedure and Parts & Warranty Information on Mazda Global Service Support (MGSS) to reflect this change. ”
The records describe a problem worth checking before purchase.
“Subject: TSB 01-001/26 Warranty and Parts Kit Update INCLUDES: Warranty Extension Program - Special Service Program (SSP) D8 Check Engine Light ON with DTC P0126:00, 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 2018-2021 Mazda6, 2020-2023 CX-30 Dear Mazda Dealer Colleagues, Mazda Motor Corporation has made a change regarding related parts to TSB 01-001/26 which also impacts Warranty Extension Special Service Program (SSPD8). Parts Ordering and Warranty Claims: Effective March 5, 2026 only the related parts kit PYY2-15-SAY can be ordered and claimed for any repair. The two separate parts PYFB-15-169 and PE13-15-296 can no longer be claimed with repaired dates of March 5, 2026 and later. There is no change to the main part, the Plug PYY3-15-SA1. We have updated the TSB 01-001/26 and SSPD8 Repair Procedure and Parts & Warranty Information on Mazda Global Service Support (MGSS) to reflect this change. ”
The records describe a problem worth checking before purchase.
“Subject: TSB 01-001/26 Warranty and Parts Kit Update INCLUDES: Warranty Extension Program - Special Service Program (SSP) D8 Check Engine Light ON with DTC P0126:00, 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 2018-2021 Mazda6, 2020-2023 CX-30 Dear Mazda Dealer Colleagues, Mazda Motor Corporation has made a change regarding related parts to TSB 01-001/26 which also impacts Warranty Extension Special Service Program (SSPD8). Parts Ordering and Warranty Claims: Effective March 5, 2026 only the related parts kit PYY2-15-SAY can be ordered and claimed for any repair. The two separate parts PYFB-15-169 and PE13-15-296 can no longer be claimed with repaired dates of March 5, 2026 and later. There is no change to the main part, the Plug PYY3-15-SA1. We have updated the TSB 01-001/26 and SSPD8 Repair Procedure and Parts & Warranty Information on Mazda Global Service Support (MGSS) to reflect this change. ”
17 reviewed owner reports for this model year mention exterior lighting.
Why it matters
The records describe a problem worth checking before purchase.
Mileage in the reports
In reports that included mileage, this problem showed up around 28,000 to 37,500 miles.
Based on 7 reports that included mileage. This is not a failure rate or a prediction.
What to inspect
Ask the inspector to test the named system and note any warning lights, noises, leaks, or stored codes.
Ask the inspector to check: Independent pre-purchase inspection.
What may help
Use the inspection and service records to check whether this car shows the reported problem.
Sources and limitsShowHide
Source recordEvidence: Medium confidence
The records describe a problem worth checking before purchase.
“Humming sound coming from driver’s side headlight as soon as unlock bottom pressed in key fob. This sound comes from a faulty cooling fan inside the headlight and is a known defect. Humming sound progressed to very slow pitch indicating that fan function is diminishing over time. Mazda will replace the headlight but required me to pay $200 toward it. This should be a recall with replacement at no cost to the consumer as they are aware of the defect.”
The records describe a problem worth checking before purchase.
“The mechanical motor assembly inside the adaptive front-lighting headlamp unit has failed on my 2022 Mazda CX-5. This mechanical malfunction severely compromises nighttime driving illumination, creating a direct road hazard by reducing forward visibility during essential evening commutes. An initial repair and parts request was submitted to Mazda several months ago, but no corporate response or resolution was ever received. The vehicle and component are currently available for inspection at Yark Mazda in Toledo, OH, where technicians have confirmed the headlight motor failure. Because the prior request went unanswered, the dealership has advised me to contact Mazda corporate directly to follow up. No dashboard warning lights appeared prior to the component failure.”
The records describe a problem worth checking before purchase.
“My 2022 Mazda CX-5 Signature began producing a loud whirring/rattling noise from the driver-side front headlight assembly. After investigation, the noise was identified as coming from the internal cooling fan located inside the LED headlight unit. The cooling fan, which is integrated into the bi-LED headlamp assembly, appears to be failing prematurely due to bearing wear. This is a known widespread defect on 2019–2023 Mazda CX-5 models. Mazda has already issued Technical Service Bulletin (TSB) 09-015-23, which acknowledges the noise issue and instructs dealers to replace the entire front combination light assembly under warranty. However, no formal recall has been issued. The root cause appears to be Mazda’s design decision to use the full LED headlight beam as the Daytime Running Light (DRL), which keeps the headlight cooling fans running continuously whenever the vehicle is in operation — even in daylight. This accelerates fan bearing wear far beyond normal expectations. The headlight assembly costs $1,200–$1,700 per side to replace out of warranty. Owners whose warranty has expired are facing repair bills of $2,400–$3,400 for both sides. This constitutes a significant safety risk as headlight failure reduces nighttime visibility. I have scheduled a warranty repair at an authorized Mazda dealer under TSB 09-015-23.”
The records describe a problem worth checking before purchase.
“The contact owns a 2022 Mazda CX-5. The contact stated that while driving at nighttime at undisclosed speeds, there was an abnormal sound coming from the headlights. No warning lights were illuminated. The vehicle was taken to a local dealer, where it was diagnosed with an unknown headlight fan bearing failure. The vehicle was not repaired because the warranty had expired. The manufacturer was not made aware of the failure. The failure mileage was approximately 37,000.”
The records describe a problem worth checking before purchase.
“Both LED headlights died within two months of each other on this relatively new vehicle. Outside the three year warranty, but only 27,000 miles (well within the 36,000 warranty period). As it's outside of the three years, the warranty already expired regardless of mileage. One headlight was grinding (fan) while the other's low beam simply died. Each headlight cost $2800 to replace. You can't simply replace a burned out bulb with this headlight design. The entire unit must be replaced at a cost of almost $3000 depending on your dealer. This is a major safety issue when headlights die while driving at night. This is not a user maintenance issue. It is not normal wear and tear. Almost $6000 dollars to replace poorly designed headlights within two months of each other on a new-ish vehicle while being a safety concern constitutes reason enough to issue a recall, and to reimburse owners for previous replacements.”
The records describe a problem worth checking before purchase.
“RH LED headlight cooling fan failure. Diagnosed by Mazda dealer and quoted $2450 cost. Vehicle is just outside warranty coverage by 2900 miles. This is a very well known and documented problem that Mazda is not standing behind. Owners are removing the relay for their daytime running lights, rendering them inoperable in order to save wear and tear on the headlight cooling fans. This is a safety hazard.”
The records describe a problem worth checking before purchase.
“My driver side front headlight fan is malfunctioning. It stays on and makes a loud noise when the car is parked and off and the lights are still on. This is a known defect and my dealership is asking for 2k to pay for it. I am concerned the light will go out causing safety concerns. (TSB) SA01323 and 09-015/23. This should be recalled as is it not a general wear and tear issue, it is a manufacturing issue. My car is out of warranty but this should still be covered.”
The records describe a problem worth checking before purchase.
“I have a failed leveling motor on my led headlight assembly causing a constant noise as it is attempting to level. This is apparently a known problem and has had a TSA technical service bulletin of 09-015/23. My car is past the 3 yr warranty but under the 36,000 mile warranty period with only 33,000 miles. Mazda refuses to cover it since it has not had a recall yet even though it is a common and known problem. They are quoting a 1200 repair cost. Can you please help in any way and address this? Thank you”
The records describe a problem worth checking before purchase.
“Both front headlights are making an abnormal loud whining noise which started intermittently about 6 months ago and became continuous January 2026. Took vehicle to dealership where the dealership reported that the noise may be due to contamination by a foreign matter during the manufacturing process getting inside the adaptive headlight system causing the fan motor bearings inside the headlight to wear out. MAZDA dealership in Bridgeport WV stated the fix is to replace both front headlights at a significant cost to the owner if the vehicle is outside the warranty. The only indication that there is a problem is the loud noise coming from the headlights, there has been no warning messages. MAZDA is not willing to fix the issue unless the vehicle is within warranty. My vehicle is not within the known Vins listed below having this issue and is outside of the warranty. I reached out to Mazda Corp with case # [XXX] and MAZDA Corp denied financial assistance, but stated I could work with the dealership to trade my vehicle instead of fixing the issue. MAZDA knows the issue is on these vehicles per the TSB report given to me when I took my vehicle to the dealership. Previous TSBs per the report (SA-013/23 & 09-015/23) 2020-2025 CX 30 (Mexico built) Vins lower 3MV DM **** ** 794028 (Produced before Dec., 2020) 2022-2025 CX-5 Vins lower than JM3 KF **** ** 57088 (Produced before Sep., 2024) 2025 CX-70 Vins lower than JM3 KJ**** ** 118240 (Produced before Sep., 2024) 2024-2025 CX-90 Vins lower than JM3 KK**** ** 204555 (Produced before Sep., 2024) 2022-2024 MX-30 Vins lower than JM1 DR**** ** 200939 (Produced before Apr., 2024) 2016-2024 MX-5 Vins lower than JM1 ND**** ** 610111 (Produced before Oct., 2024) INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)”
The records describe a problem worth checking before purchase.
“Over the past several weeks, we began hearing a pronounced noise coming from the front of the vehicle, which the dealership diagnosed as a failing motor within the driver-side headlight unit. Given that this is a critical safety component, and part of the upgraded package purchased when the vehicle was new — we were surprised to encounter this issue on a vehicle of 4 years and 41,540 miles. Mazda Customer Care told me to pound salt”
The records describe a problem worth checking before purchase.
“The right headlight is very noisy. Like it is going to fail very soon. People say it's the problem with the cooling fan inside. A lot people have the same issues， Mazda should recall it ASAP”
A newly verified completed remedy with configuration-specific eligibility for Exterior Lighting owner reports, Manufacturer warranty extension could improve the recommendation.
A reviewed official or independent source that materially contradicts the claims for Exterior Lighting owner reports, Manufacturer warranty extension would force confidence and verdict review.
Mark each check as you go. Your notes stay on this device.
Saved on this device. The shared link never includes a VIN.
Use these notes with a full inspection. A serious warning sign can be enough to walk away.
Required checks
Ask the inspector to test the named system and record the result.
Manufacturer warranty extension: On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open.
Passes when: No matching symptom during inspection
Test drive: On the test drive, watch for: on certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (dtc) p0126, due to the fail-safe thermostat being stuck open..
Specialist: Independent pre-purchase inspection
Records to request: Service records showing this system was inspected or repaired
Ask the inspector to test the named system and record the result.
Manufacturer warranty extension: Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the fail-safe thermostat installed inside of the suspected coolant control valve on certain 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 20
Passes when: No matching symptom during inspection
Test drive: On the test drive, watch for: mazda motor corporation has decided to conduct a special service program (ssp) to extend the warranty coverage for a specific repair of the fail-safe thermostat installed inside of the suspected coolant control valve on certain 2018-2025 cx-5, 2019-2023 mazda3, 2019-2022 cx-3, 20.
Specialist: Independent pre-purchase inspection
Records to request: Service records showing this system was inspected or repaired
Ask the inspector to test the named system and record the result.
Manufacturer warranty extension: SSPD8 - Check Engine Light ON with DTC P0126:00 - WARRANTY EXTENSION For certain 2018-2025MY CX-5, 2019-2023MY Mazda3, 2019-2022MY CX-3, 2018-2021MY Mazda6, 2020-2023MY CX-30 that are equipped with the suspected coolant control valve, the warranty coverage for specific repair of
Passes when: No matching symptom during inspection
Test drive: On the test drive, watch for: sspd8 - check engine light on with dtc p0126:00 - warranty extension for certain 2018-2025my cx-5, 2019-2023my mazda3, 2019-2022my cx-3, 2018-2021my mazda6, 2020-2023my cx-30 that are equipped with the suspected coolant control valve, the warranty coverage for specific repair of .
Specialist: Independent pre-purchase inspection
Records to request: Service records showing this system was inspected or repaired
Ask the inspector to test the named system and record the result.
Manufacturer warranty extension: Subject: TSB 01-001/26 Warranty and Parts Kit Update INCLUDES: Warranty Extension Program - Special Service Program (SSP) D8 Check Engine Light ON with DTC P0126:00, 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 2018-2021 Mazda6, 2020-2023 CX-30 Dear Mazda Dealer Colleagues,
Passes when: No matching symptom during inspection
Test drive: On the test drive, watch for: subject: tsb 01-001/26 warranty and parts kit update includes: warranty extension program - special service program (ssp) d8 check engine light on with dtc p0126:00, 2018-2025 cx-5, 2019-2023 mazda3, 2019-2022 cx-3, 2018-2021 mazda6, 2020-2023 cx-30 dear mazda dealer colleagues, .
Specialist: Independent pre-purchase inspection
Records to request: Service records showing this system was inspected or repaired
The link and text carry only the car and non-sensitive context, never price, risk, or VIN.
Your shortlist (saved on this device)
Full evidence
Every conclusion above traces to one of these source records.
Source recordEvidence: Medium confidence
The records describe a problem worth checking before purchase.
“Humming sound coming from driver’s side headlight as soon as unlock bottom pressed in key fob. This sound comes from a faulty cooling fan inside the headlight and is a known defect. Humming sound progressed to very slow pitch indicating that fan function is diminishing over time. Mazda will replace the headlight but required me to pay $200 toward it. This should be a recall with replacement at no cost to the consumer as they are aware of the defect.”
The records describe a problem worth checking before purchase.
“The mechanical motor assembly inside the adaptive front-lighting headlamp unit has failed on my 2022 Mazda CX-5. This mechanical malfunction severely compromises nighttime driving illumination, creating a direct road hazard by reducing forward visibility during essential evening commutes. An initial repair and parts request was submitted to Mazda several months ago, but no corporate response or resolution was ever received. The vehicle and component are currently available for inspection at Yark Mazda in Toledo, OH, where technicians have confirmed the headlight motor failure. Because the prior request went unanswered, the dealership has advised me to contact Mazda corporate directly to follow up. No dashboard warning lights appeared prior to the component failure.”
The records describe a problem worth checking before purchase.
“My 2022 Mazda CX-5 Signature began producing a loud whirring/rattling noise from the driver-side front headlight assembly. After investigation, the noise was identified as coming from the internal cooling fan located inside the LED headlight unit. The cooling fan, which is integrated into the bi-LED headlamp assembly, appears to be failing prematurely due to bearing wear. This is a known widespread defect on 2019–2023 Mazda CX-5 models. Mazda has already issued Technical Service Bulletin (TSB) 09-015-23, which acknowledges the noise issue and instructs dealers to replace the entire front combination light assembly under warranty. However, no formal recall has been issued. The root cause appears to be Mazda’s design decision to use the full LED headlight beam as the Daytime Running Light (DRL), which keeps the headlight cooling fans running continuously whenever the vehicle is in operation — even in daylight. This accelerates fan bearing wear far beyond normal expectations. The headlight assembly costs $1,200–$1,700 per side to replace out of warranty. Owners whose warranty has expired are facing repair bills of $2,400–$3,400 for both sides. This constitutes a significant safety risk as headlight failure reduces nighttime visibility. I have scheduled a warranty repair at an authorized Mazda dealer under TSB 09-015-23.”
The records describe a problem worth checking before purchase.
“The contact owns a 2022 Mazda CX-5. The contact stated that while driving at nighttime at undisclosed speeds, there was an abnormal sound coming from the headlights. No warning lights were illuminated. The vehicle was taken to a local dealer, where it was diagnosed with an unknown headlight fan bearing failure. The vehicle was not repaired because the warranty had expired. The manufacturer was not made aware of the failure. The failure mileage was approximately 37,000.”
The records describe a problem worth checking before purchase.
“Both LED headlights died within two months of each other on this relatively new vehicle. Outside the three year warranty, but only 27,000 miles (well within the 36,000 warranty period). As it's outside of the three years, the warranty already expired regardless of mileage. One headlight was grinding (fan) while the other's low beam simply died. Each headlight cost $2800 to replace. You can't simply replace a burned out bulb with this headlight design. The entire unit must be replaced at a cost of almost $3000 depending on your dealer. This is a major safety issue when headlights die while driving at night. This is not a user maintenance issue. It is not normal wear and tear. Almost $6000 dollars to replace poorly designed headlights within two months of each other on a new-ish vehicle while being a safety concern constitutes reason enough to issue a recall, and to reimburse owners for previous replacements.”
The records describe a problem worth checking before purchase.
“RH LED headlight cooling fan failure. Diagnosed by Mazda dealer and quoted $2450 cost. Vehicle is just outside warranty coverage by 2900 miles. This is a very well known and documented problem that Mazda is not standing behind. Owners are removing the relay for their daytime running lights, rendering them inoperable in order to save wear and tear on the headlight cooling fans. This is a safety hazard.”
The records describe a problem worth checking before purchase.
“My driver side front headlight fan is malfunctioning. It stays on and makes a loud noise when the car is parked and off and the lights are still on. This is a known defect and my dealership is asking for 2k to pay for it. I am concerned the light will go out causing safety concerns. (TSB) SA01323 and 09-015/23. This should be recalled as is it not a general wear and tear issue, it is a manufacturing issue. My car is out of warranty but this should still be covered.”
The records describe a problem worth checking before purchase.
“I have a failed leveling motor on my led headlight assembly causing a constant noise as it is attempting to level. This is apparently a known problem and has had a TSA technical service bulletin of 09-015/23. My car is past the 3 yr warranty but under the 36,000 mile warranty period with only 33,000 miles. Mazda refuses to cover it since it has not had a recall yet even though it is a common and known problem. They are quoting a 1200 repair cost. Can you please help in any way and address this? Thank you”
The records describe a problem worth checking before purchase.
“Both front headlights are making an abnormal loud whining noise which started intermittently about 6 months ago and became continuous January 2026. Took vehicle to dealership where the dealership reported that the noise may be due to contamination by a foreign matter during the manufacturing process getting inside the adaptive headlight system causing the fan motor bearings inside the headlight to wear out. MAZDA dealership in Bridgeport WV stated the fix is to replace both front headlights at a significant cost to the owner if the vehicle is outside the warranty. The only indication that there is a problem is the loud noise coming from the headlights, there has been no warning messages. MAZDA is not willing to fix the issue unless the vehicle is within warranty. My vehicle is not within the known Vins listed below having this issue and is outside of the warranty. I reached out to Mazda Corp with case # [XXX] and MAZDA Corp denied financial assistance, but stated I could work with the dealership to trade my vehicle instead of fixing the issue. MAZDA knows the issue is on these vehicles per the TSB report given to me when I took my vehicle to the dealership. Previous TSBs per the report (SA-013/23 & 09-015/23) 2020-2025 CX 30 (Mexico built) Vins lower 3MV DM **** ** 794028 (Produced before Dec., 2020) 2022-2025 CX-5 Vins lower than JM3 KF **** ** 57088 (Produced before Sep., 2024) 2025 CX-70 Vins lower than JM3 KJ**** ** 118240 (Produced before Sep., 2024) 2024-2025 CX-90 Vins lower than JM3 KK**** ** 204555 (Produced before Sep., 2024) 2022-2024 MX-30 Vins lower than JM1 DR**** ** 200939 (Produced before Apr., 2024) 2016-2024 MX-5 Vins lower than JM1 ND**** ** 610111 (Produced before Oct., 2024) INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)”
The records describe a problem worth checking before purchase.
“Over the past several weeks, we began hearing a pronounced noise coming from the front of the vehicle, which the dealership diagnosed as a failing motor within the driver-side headlight unit. Given that this is a critical safety component, and part of the upgraded package purchased when the vehicle was new — we were surprised to encounter this issue on a vehicle of 4 years and 41,540 miles. Mazda Customer Care told me to pound salt”
The records describe a problem worth checking before purchase.
“The right headlight is very noisy. Like it is going to fail very soon. People say it's the problem with the cooling fan inside. A lot people have the same issues， Mazda should recall it ASAP”
The records describe a problem worth checking before purchase.
“On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.”
The records describe a problem worth checking before purchase.
“On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.”
The records describe a problem worth checking before purchase.
“On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.”
The records describe a problem worth checking before purchase.
“Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the fail-safe thermostat installed inside of the suspected coolant control valve on certain 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 2018-2021 Mazda6 and 2020-2023 CX-30 vehicles. The warranty coverage for an applicable repair has been extended to 15 years (180 months) /150,000 miles (240,000 km) whichever comes first, from the original warranty start date. If you are a recipient of this notice, your vehicle is included in this warranty extension program. What is the problem? On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.”
The records describe a problem worth checking before purchase.
“Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the fail-safe thermostat installed inside of the suspected coolant control valve on certain 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 2018-2021 Mazda6 and 2020-2023 CX-30 vehicles. The warranty coverage for an applicable repair has been extended to 15 years (180 months) /150,000 miles (240,000 km) whichever comes first, from the original warranty start date. If you are a recipient of this notice, your vehicle is included in this warranty extension program. What is the problem? On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.”
The records describe a problem worth checking before purchase.
“Mazda Motor Corporation has decided to conduct a Special Service Program (SSP) to extend the warranty coverage for a specific repair of the fail-safe thermostat installed inside of the suspected coolant control valve on certain 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 2018-2021 Mazda6 and 2020-2023 CX-30 vehicles. The warranty coverage for an applicable repair has been extended to 15 years (180 months) /150,000 miles (240,000 km) whichever comes first, from the original warranty start date. If you are a recipient of this notice, your vehicle is included in this warranty extension program. What is the problem? On certain subject vehicles, the check engine light is illuminated with diagnostic trouble code (DTC) P0126, due to the fail-safe thermostat being stuck open. Additionally, you may notice one or more of the following symptoms: -Engine takes longer to warm up. -Engine temperature gauge fluctuates. -Low coolant temperature indicator (blue) light stays on longer or turns on while driving. -Poor heater performance, especially at idle. This warranty extension program applies only to the replacement of fail-safe thermostat of the vehicle exhibiting the concerns mentioned above. If the check engine light illumination is determined to be unrelated to the fail-safe thermostat being stuck open, the inspection and repair are not covered under this program.”
The records describe a problem worth checking before purchase.
“SSPD8 - Check Engine Light ON with DTC P0126:00 - WARRANTY EXTENSION For certain 2018-2025MY CX-5, 2019-2023MY Mazda3, 2019-2022MY CX-3, 2018-2021MY Mazda6, 2020-2023MY CX-30 that are equipped with the suspected coolant control valve, the warranty coverage for specific repair of the fail-safe thermostat is extended to: 15 years (180 months) or 150,000 miles (240,000 km) whichever comes first, from the original warranty start date. CONDITION OF CONCERN: On certain subject vehicles, the check engine light is illuminated with DTC P0126:00 (Thermostat stuck open) stored in memory and one or more of the following symptoms may occur: - Engine takes longer to warm up. - Engine temperature gauge fluctuates. - Low coolant temperature indicator (blue) light stays on longer or turns on while driving. - Poor heater performance, especially at idle. Mazda Motor Corporation has made a significant repair change to TSB 01-003/25 which also impacts Warranty Extension Special Service Program (SSPD8). Repair Procedure Update: Effective December 8th all repairs applicable to TSB 01-003/25 or SSPD8 must follow the new repair procedure. The repair now replaces the thermostat with a dummy plug for the coolant control valve (CCV) along with a required software update for the PCM. Prior Repairs: Any repairs previously completed with the replacement of the thermostat or coolant control valve assembly does not require a re-repair unless there is a verified failure following the diagnosis in the TSB. It is expected that there will be no further repairs made for this concern once the plug and software update has been completed. Therefore, a return visit for symptoms related to the TSB or SSP must contact the Technical Hotline for assistance. VITALLY IMPORTANT!: There must be a “Software Update” record for the PCM when using MDARS or IDS. • MDARS - If there is no Software Update entry in MDARS or the Collect Diagnostic Information (ODR Update) is not completed (or both), the vehicle will not be considered repaired and the warranty claim will be rejected. • IDS – Vehicles programed with IDS must Collect Diagnostic Data, and that data must be attached to the warranty claim. If the data is not attached to the claim, the vehicle will not be considered repaired and the warranty claim will be rejected, denied or debited. Failure to complete the above will require the vehicle to return to the dealership and be re-repaired at the dealer’s expense with great inconvenience to the Mazda customer. Failure to perform the software update could also potentially damage the engine which would not be covered by warranty and would expose your dealership to the cost of repairs. ”
The records describe a problem worth checking before purchase.
“SSPD8 - Check Engine Light ON with DTC P0126:00 - WARRANTY EXTENSION For certain 2018-2025MY CX-5, 2019-2023MY Mazda3, 2019-2022MY CX-3, 2018-2021MY Mazda6, 2020-2023MY CX-30 that are equipped with the suspected coolant control valve, the warranty coverage for specific repair of the fail-safe thermostat is extended to: 15 years (180 months) or 150,000 miles (240,000 km) whichever comes first, from the original warranty start date. CONDITION OF CONCERN: On certain subject vehicles, the check engine light is illuminated with DTC P0126:00 (Thermostat stuck open) stored in memory and one or more of the following symptoms may occur: - Engine takes longer to warm up. - Engine temperature gauge fluctuates. - Low coolant temperature indicator (blue) light stays on longer or turns on while driving. - Poor heater performance, especially at idle. Mazda Motor Corporation has made a significant repair change to TSB 01-003/25 which also impacts Warranty Extension Special Service Program (SSPD8). Repair Procedure Update: Effective December 8th all repairs applicable to TSB 01-003/25 or SSPD8 must follow the new repair procedure. The repair now replaces the thermostat with a dummy plug for the coolant control valve (CCV) along with a required software update for the PCM. Prior Repairs: Any repairs previously completed with the replacement of the thermostat or coolant control valve assembly does not require a re-repair unless there is a verified failure following the diagnosis in the TSB. It is expected that there will be no further repairs made for this concern once the plug and software update has been completed. Therefore, a return visit for symptoms related to the TSB or SSP must contact the Technical Hotline for assistance. VITALLY IMPORTANT!: There must be a “Software Update” record for the PCM when using MDARS or IDS. • MDARS - If there is no Software Update entry in MDARS or the Collect Diagnostic Information (ODR Update) is not completed (or both), the vehicle will not be considered repaired and the warranty claim will be rejected. • IDS – Vehicles programed with IDS must Collect Diagnostic Data, and that data must be attached to the warranty claim. If the data is not attached to the claim, the vehicle will not be considered repaired and the warranty claim will be rejected, denied or debited. Failure to complete the above will require the vehicle to return to the dealership and be re-repaired at the dealer’s expense with great inconvenience to the Mazda customer. Failure to perform the software update could also potentially damage the engine which would not be covered by warranty and would expose your dealership to the cost of repairs. ”
The records describe a problem worth checking before purchase.
“SSPD8 - Check Engine Light ON with DTC P0126:00 - WARRANTY EXTENSION For certain 2018-2025MY CX-5, 2019-2023MY Mazda3, 2019-2022MY CX-3, 2018-2021MY Mazda6, 2020-2023MY CX-30 that are equipped with the suspected coolant control valve, the warranty coverage for specific repair of the fail-safe thermostat is extended to: 15 years (180 months) or 150,000 miles (240,000 km) whichever comes first, from the original warranty start date. CONDITION OF CONCERN: On certain subject vehicles, the check engine light is illuminated with DTC P0126:00 (Thermostat stuck open) stored in memory and one or more of the following symptoms may occur: - Engine takes longer to warm up. - Engine temperature gauge fluctuates. - Low coolant temperature indicator (blue) light stays on longer or turns on while driving. - Poor heater performance, especially at idle. Mazda Motor Corporation has made a significant repair change to TSB 01-003/25 which also impacts Warranty Extension Special Service Program (SSPD8). Repair Procedure Update: Effective December 8th all repairs applicable to TSB 01-003/25 or SSPD8 must follow the new repair procedure. The repair now replaces the thermostat with a dummy plug for the coolant control valve (CCV) along with a required software update for the PCM. Prior Repairs: Any repairs previously completed with the replacement of the thermostat or coolant control valve assembly does not require a re-repair unless there is a verified failure following the diagnosis in the TSB. It is expected that there will be no further repairs made for this concern once the plug and software update has been completed. Therefore, a return visit for symptoms related to the TSB or SSP must contact the Technical Hotline for assistance. VITALLY IMPORTANT!: There must be a “Software Update” record for the PCM when using MDARS or IDS. • MDARS - If there is no Software Update entry in MDARS or the Collect Diagnostic Information (ODR Update) is not completed (or both), the vehicle will not be considered repaired and the warranty claim will be rejected. • IDS – Vehicles programed with IDS must Collect Diagnostic Data, and that data must be attached to the warranty claim. If the data is not attached to the claim, the vehicle will not be considered repaired and the warranty claim will be rejected, denied or debited. Failure to complete the above will require the vehicle to return to the dealership and be re-repaired at the dealer’s expense with great inconvenience to the Mazda customer. Failure to perform the software update could also potentially damage the engine which would not be covered by warranty and would expose your dealership to the cost of repairs.”
The records describe a problem worth checking before purchase.
“Subject: TSB 01-001/26 Warranty and Parts Kit Update INCLUDES: Warranty Extension Program - Special Service Program (SSP) D8 Check Engine Light ON with DTC P0126:00, 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 2018-2021 Mazda6, 2020-2023 CX-30 Dear Mazda Dealer Colleagues, Mazda Motor Corporation has made a change regarding related parts to TSB 01-001/26 which also impacts Warranty Extension Special Service Program (SSPD8). Parts Ordering and Warranty Claims: Effective March 5, 2026 only the related parts kit PYY2-15-SAY can be ordered and claimed for any repair. The two separate parts PYFB-15-169 and PE13-15-296 can no longer be claimed with repaired dates of March 5, 2026 and later. There is no change to the main part, the Plug PYY3-15-SA1. We have updated the TSB 01-001/26 and SSPD8 Repair Procedure and Parts & Warranty Information on Mazda Global Service Support (MGSS) to reflect this change. ”
The records describe a problem worth checking before purchase.
“Subject: TSB 01-001/26 Warranty and Parts Kit Update INCLUDES: Warranty Extension Program - Special Service Program (SSP) D8 Check Engine Light ON with DTC P0126:00, 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 2018-2021 Mazda6, 2020-2023 CX-30 Dear Mazda Dealer Colleagues, Mazda Motor Corporation has made a change regarding related parts to TSB 01-001/26 which also impacts Warranty Extension Special Service Program (SSPD8). Parts Ordering and Warranty Claims: Effective March 5, 2026 only the related parts kit PYY2-15-SAY can be ordered and claimed for any repair. The two separate parts PYFB-15-169 and PE13-15-296 can no longer be claimed with repaired dates of March 5, 2026 and later. There is no change to the main part, the Plug PYY3-15-SA1. We have updated the TSB 01-001/26 and SSPD8 Repair Procedure and Parts & Warranty Information on Mazda Global Service Support (MGSS) to reflect this change. ”
The records describe a problem worth checking before purchase.
“Subject: TSB 01-001/26 Warranty and Parts Kit Update INCLUDES: Warranty Extension Program - Special Service Program (SSP) D8 Check Engine Light ON with DTC P0126:00, 2018-2025 CX-5, 2019-2023 Mazda3, 2019-2022 CX-3, 2018-2021 Mazda6, 2020-2023 CX-30 Dear Mazda Dealer Colleagues, Mazda Motor Corporation has made a change regarding related parts to TSB 01-001/26 which also impacts Warranty Extension Special Service Program (SSPD8). Parts Ordering and Warranty Claims: Effective March 5, 2026 only the related parts kit PYY2-15-SAY can be ordered and claimed for any repair. The two separate parts PYFB-15-169 and PE13-15-296 can no longer be claimed with repaired dates of March 5, 2026 and later. There is no change to the main part, the Plug PYY3-15-SA1. We have updated the TSB 01-001/26 and SSPD8 Repair Procedure and Parts & Warranty Information on Mazda Global Service Support (MGSS) to reflect this change. ”
