TireKick

Dossier-backed inspection brief

2022 Mazda Mazda3 inspection checklist

Use this beside the car or hand it to a mechanic. Every check comes from a named issue in the published authority; configuration uncertainty remains visible.

Configuration: No reviewed 2022 configuration is available; configuration-specific conclusions are withheld.

Inspect this Mazda3

Mark each check as you go. Progress saves on this device, works offline, and prints cleanly.

Saved on this device — no account needed. Copy link shares the safe URL only (no price, risk, or VIN).

Mark the checks to see where they point: a single Walk away outweighs the rest.

Required checks

  • Check the VIN for open NHTSA actions, then ask the inspector to test the named system and document the result.

    Sa-056-21: Auxiliary Key Blank Replacement Procedure If All Keys Lost (Temporary Procedure): If Both Auxiliary Keys Are Lost, The Key Cutting Machines safety campaign: Auxiliary Key Blank Replacement Procedure If All Keys Lost (Temporary Procedure): If both auxiliary keys are lost, the key cutting machines cannot cut new replacement keys using the vehicle key code.

    Passes when: No matching symptom during inspection

    Pass / Concern / Walk away

Ask the seller

  • Has any named issue here ever been diagnosed or repaired on this car?
  • Can I see the maintenance and any recall-remedy records?
  • Will you allow an independent pre-purchase inspection?

Records to request

  • Service and oil-change history
  • Completed recall / campaign paperwork
  • Any dealer diagnostic reports

Why these checks are here

Sa-056-21: Auxiliary Key Blank Replacement Procedure If All Keys Lost (Temporary Procedure): If Both Auxiliary Keys Are Lost, The Key Cutting Machines safety campaign

The cited record is bound to model year 2022; no broader incidence claim is made.

Red flags: Auxiliary Key Blank Replacement Procedure If All Keys Lost (Temporary Procedure): If both auxiliary keys are lost, the key cutting machines cannot cut new replacement keys using the vehicle key code.

Pass signals: No matching symptom during inspection · Service history addresses the named condition

clm_mazda-mazda3-2022-tsb-nhtsa-mc-10205993-sa-056-21-2022-obs-44315

Inspection evidence

clm_mazda-mazda3-2022-tsb-nhtsa-mc-10205993-sa-056-21-2022-obs-443152022 Mazda Mazda3Evidence: Limited confidence

The official record identifies a condition that deserves candidate-specific inspection and record verification.

“Auxiliary Key Blank Replacement Procedure If All Keys Lost (Temporary Procedure): If both auxiliary keys are lost, the key cutting machines cannot cut new replacement keys using the vehicle key code.”
NHTSAtsbDec 2021Open source record

Published from release rel_v4_cohort_20260726 with methodology m1-v4-authority-cohort. Check a specific candidate →