Dossier-backed inspection brief
Use this beside the car or hand it to a mechanic. Every check comes from a named issue in the published authority; configuration uncertainty remains visible.
Configuration: 5 reviewed 2018 configurations exist; the model-year authority does not guess which one a buyer has.
Mark each check as you go. Progress saves on this device, works offline, and prints cleanly.
Saved on this device — no account needed. Copy link shares the safe URL only (no price, risk, or VIN).
Mark the checks to see where they point: a single Walk away outweighs the rest.
Check the VIN for open NHTSA actions, then ask the inspector to test the named system and document the result.
5np-V3f8t-09: If You Are Servicing A Vehicle With The Dtc Or Symptoms Listed Below, Refer To The Service Procedure To Diagnose The Condition. ? Diagnost safety campaign: If you are servicing a vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition.
Passes when: No matching symptom during inspection
The cited record is bound to model year 2018; no broader incidence claim is made.
Red flags: If you are servicing a vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition.
Pass signals: No matching symptom during inspection · Service history addresses the named condition
The official record identifies a condition that deserves candidate-specific inspection and record verification.
“If you are servicing a vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. ? Diagnostic trouble codes: ? P0705 - Range switch sensor circuit ? P0706 - Range switch range/performance ? P0707 - Range switch - open circuit ? P0708 - Range switch - short circuit or multiple inputs ? Symptoms: ? Malfunction Indicator Light (MIL) illuminated ? 4th gear fail-safe ? No gear indication in cluster ? Intermittent no engine crank/no start in ?P? or ?N? with or without MIL or DTC.”
Published from release rel_v4_cohort_20260726 with methodology m1-v4-authority-cohort. Check a specific candidate →