2020 GMC Sierra 1500 inspection checklist

The records describe a possible crash, fire, injury, or loss of control.

“Tailgate releases on its own while parked, without the use of the switch. Tailgate released on its own with my trailer attached while parked on many occasions. The result of the Tailgate releasing caused damage to the upper section of the Tailgate, the "kicker speaker system" in the Tailgate and Tailgate switch located on the upper section of the Tailgate. There also have been multiple times when attaching the trailer that the Tailgate has released and struck me in the head. The Tailgate also fills with water during rain, and carwashes. The damage caused by the Tailgate releasing is a dent on the upper section of the multi-pro Tailgate and rust and malfunction of the " kicker speaker system " as well as the occasional hickey and headache on my head. The Tailgate has filled up with water since I purchased it new in December of 2020 which I believe has been electricly shorting the Tailgate switch/button releasing the Tailgate randomly. Due to my particular 2020 GMC Sierra 1500 AT4 CarbonPro having the " kicker speaker system " in my opinion makes the Tailgate so much heavier than one without it that it made the damages such as the dent in the face above the Tailgate switch much worse than trucks without it also causing more water to enter the Tailgate causing more damage to the switch and components of the " kicker speaker system ", such as the amp and buttons for it not to mention my head on several occasions.”

The records describe a problem worth checking before purchase.

“The cam shaft bearing failed under normal driving conditions. Many of the service engine lights including brakes and primary service engine light came on after the cam shaft bearing failure. The engine was replaced by a GM dealership at 65,000 miles and was inspected to determine the cam shaft bearing failed. Luckily the engine failed at a speed of 35 mph on an off ramp, as a complete engine failure on the highway could have been much more dangerous. Following the replacement of the engine, within 500 engine miles, O2 sensors in the catalytic converter were replaced and ultimately the catalytic converter had to be replaced as well.”

The records describe a problem worth checking before purchase.

“The contact owns a 2020 GMC Sierra 1500. The contact stated that upon taking the vehicle to the dealer for a transmission fluid flush and refill, the contact was informed that the transmission was inoperable, and the vehicle could not be driven to the residence. The dealer determined that the torque converter needed to be replaced. The dealer replaced the torque converter and advised the contact to drive over 1,000 miles for the issue to self-correct. The contact stated that the vehicle continued to shudder and drive bumpy while driving after 1,000 miles. The vehicle was taken back to the dealer, where the torque converter was replaced a second time; however, the failure persisted. The dealer informed the contact that the diagnostic test results were sent to the warranty company for the transmission replacement approval. The vehicle was not yet repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 85,165.”

The records describe a problem worth checking before purchase.

“TL* THE CONTACT OWNS A 2020 GMC SIERRA. THE CONTACT STATED THAT WHILE DRIVING AT 25 MPH, THE SYSTEM BRAKE FAILURE WARNING MESSAGE ILLUMINATED ON THE INSTRUMENT PANEL. ONCE THE WARNING LIGHT ILLUMINATED, THE CONTACT EXPERIENCED COMPLETE BRAKE AND STEERING FAILURE. THE CONTACT WAS ABLE TO STEER THE VEHICLE INTO A CURB TO SLOW DOWN THE VEHICLE AND AVOID A POSSIBLE COLLISION WITH ANOTHER VEHICLE. THE CONTACT STATED THAT HE HAD SUFFERED PAIN TO HIS LEFT SHOULDER BLADE AND LEFT KNEE; HOWEVER, HE DID NOT SEEK MEDICAL ATTENTION DUE TO COVID-19. AFTER EXPERIENCING THE FAILURE, THE CONTACT HAD THE VEHICLE TOWED TO DESERT SUN MOTORS, INC. (2600 N WHITE SANDS BLVD, ALAMOGORDO, NM 88310) WHERE THEY CLEARED THE SYSTEM'S COMPUTER AND INFORMED THE CONTACT THAT THEY FOUND NO DEFECTS WITH THE VEHICLE. UPON RETURN OF THE VEHICLE, HE EXPERIENCED ANOTHER BRAKE FAILURE AS THE CHECK ENGINE LIGHT ILLUMINATED WHILE DRIVING AT 55 MPH. DUE TO THE FAILURE, THE CONTACT WAS FORCED TO RUN A RED LIGHT AND DRIVE UP AN INCLINE IN ORDER TO BRING THE VEHICLE TO A COMPLETE STOP. THE VEHICLE WAS THEN TOWED SHAMALEY BUICK GMC (955 CROCKETT ST, EL PASO, TX 79922) WHERE IT REMAINED IN THEIR POSSESSION. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE AND A FIELD INSPECTOR WAS SENT TO INSPECT THE VEHICLE. THE CONTACT STATED THAT KNOW BRAKE FAILURE CODES WERE DETECTED. THE CONTACT STATED AFTER THE THIRD FAILURE THE VEHICLE WAS TOWED TO SHAMALEY GMC WHERE IT WAS AWAITING DIAGNOSIS. THE VEHICLE HAD YET TO BE REPAIRED. THE FAILURE MILEAGE WAS UNKNOWN.”

The records describe a problem worth checking before purchase.

“Loss of motive power due to engine failure The Office of Defects Investigation (ODI) has received 1,157 reports of engine bearing failure failures in the L87 6.2L engine produced by General Motors (GM). Of the 1,157 reports received, 173 are outside of the scope of recall 25V-274. These engines are installed in Model Years (MY) 2019–2024 Chevrolet Silverado 1500 and GMC Sierra 1500, and 2021-2024MY Chevrolet Suburban and Tahoe, GMC Yukon/Yukon XL, and Cadillac Escalade/Escalade ESV vehicles. The subject engine failures were investigated as part of a Preliminary Evaluation (PE25001).  GM determined that these engine failures were due to multiple supplier manufacturing and quality issues. GM issued recall 25V-274 to address the supplier manufacturing and quality issues produced between March 1, 2021, and May 31, 2024. Based on the issuance of recall 25V-274, NHTSA has closed PE25001. ODI continues to receive a significant number of reports of engine failure in vehicles outside the scope of 25V-274.  This presents a potential safety risk that warrants further investigation.  ODI is opening this Engineering Analysis (EA) to further evaluate the scope and severity of the potential problem and to fully assess the potential safety-related issues of vehicles built outside the recall scope. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.”

The records describe a possible crash, fire, injury, or loss of control.

“Air Bag Malfunction On April 9, 2021, the Office of Defects Investigations (ODI) opened PE21-010 to investigate instances of air bag malfunction indicator light (MIL) illumination and potential for frontal air bag non-deployment in several vehicles manufactured by General Motors (GM). The vehicles included model year (MY) 2020 through 2021 CT4 and CT5 passenger cars, Sierra and Silverado trucks (1500/2500/3500 models), XT4 and MY 2021 Escalade, Suburban, Tahoe, Yukon SUVs.Technical Service Bulletin (TSB) 21-NA-005, issued in March 2021, addresses air bag MIL illumination with diagnostic trouble codes (DTCs) B0001-1B or B0012-0D. It cites rust particles in the connection terminal interface of the driver air bag inflator housing as the cause of the air bag MIL illumination. Illumination of the air bag MIL under these circumstances may result in a non-deployment of the frontal driver air bag during a frontal collision and increased risk of injury to the driver.GM stated a correlation exists between production delays due to the pandemic shutdown and premature corrosion initiation on the surface of the air bag inflator housing, which, in some cases, caused rust development during a seven (7) month period of vehicle production. In the rare instance when a rust particle dislodges from the driver air bag inflator housing and enters the air bag connector prior to assembly, an intermittent resistance spike at the air bag connector may result. The condition generates excessive resistance in the air bag electrical system when the steering wheel horn cover is manipulated or the steering wheel is turned. This excessive resistance is momentary. A crash commanding air bag deployment would need to occur exactly when the momentary excessive resistance occurs. Thus, there is a very low likelihood the hazard will present a risk during a crash of sufficient severity to warrant a commanded deployment. This failure mechanism occurs early in life and results in an air bag MIL illumination that corresponds to a DTC warning the driver that the vehicle requires service. The vehicle's air bag remains functional while the MIL is illuminated, and the DTC is present.Once the connection of the driver air bag module to the clockspring is made at the plant, or at the dealership for service, there is no longer an opportunity for rust migration into the connection point. The connector is sealed and has gold terminals, eliminating the expectation of fretting corrosion. All subject vehicles passed standard corrosion validation testing for extensive corrosion with no issue of air bag non-deployment.There is a low rate of occurrence: 1.41 incidents per thousand vehicles (IPTV) for all related occurrences, and 0.04 IPTV for occurrences with a mention of visible rust and/or corrosion on the air bag inflator housing. The average occurrence mileage for the subject vehicles is approximately 2,100. Every occurrence related to the alleged defect experienced an air bag MIL illumination and there are no verified allegations of air bag non-deployment within all data sources.To date, there have been no reported fires, crashes, injuries, or fatalities related to this issue. In view of the low rate, and the nature of early-life failure, the high detectability of failures, and low potential hazard to drivers, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The agency reserves the right to take additional action if warranted by new circumstances.Review the ODI reports cited above at nhtsa.gov under the following identification numbers: 11537927, 11528888, 11525020, 11521401, 11506057, 11493107, 11486767, 11441525, 11433146, 11425658, 11423440, 11385267, 11376429, 11373466, 11366995.”

The records describe a possible crash, fire, injury, or loss of control.

“Loss of motive power due to engine failure On January 16, 2025, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE25001 after receiving complaints and field reports concerning engine failures in MY2019-2024 GM’s full-size truck and SUV T1XX platform equipped with the L87 6.2L V8 engine. These complainants alleged engine bearing failures resulting in knocking and growling noises from the engine’s bottom end and in some cases more severe consequences such as broken connecting rods leading to engine damage, or engine failure. If the engine fails during vehicle operation, the vehicle will lose propulsion, increasing the risk of a crash. On April 24, 2025, GM issued recall 25V-274 to address the concern with L87 engines produced between March 1, 2021, and May 31, 2024.  GM cited the root cause as a supplier manufacturing and quality issues. GM’s  recall remedy will be either an oil change to an oil with a different viscosity or engine replacement depending on the results of the remedy inspection procedure. To date, ODI has received 1,157 allegations of engine bearing failure. GM submitted 55,464 reports in total, with 29,752 unique VINs. ODI continues to receive allegations of L87 engine failures which fall outside of the scope of recall 25V-274. Based on GM’s recall, ODI will close this PE. NHTSA will continue to investigate complaints of engine failure outside the scope of recall 25V-274 as part ofEngineering Analysis (EA25007). To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors LLC (GM) is recalling certain 2019-2020 Chevrolet Silverado 1500 and GMC Sierra 1500, and 2020 Silverado 2500, Silverado 3500, Sierra 2500, and Sierra 3500 vehicles equipped with carpet floor covering. When the front seat belt pretensioners deploy, hot gas may vent through an opening in the pretensioner bracket, possibly igniting the carpet. A vehicle fire could result if materials ignite inside the vehicle. GM will notify owners, and dealers will close off the opening in the pretensioner bracket, free of charge. The recall began December 13, 2019. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-888-988-7267. GM's number for this recall is N192270600.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors LLC (GM) is recalling certain 2020 Cadillac Escalade, Escalade ESV, Chevrolet Camaro, Silverado 1500, Suburban, Tahoe, GMC Sierra 1500, Yukon, and Yukon XL vehicles. The fuel pump may be missing a pressure regulator, allowing for over-pressurization of the fuel system. Over-pressurization can crack the fuel pump and cause leaks, increasing the risk of a fire in the presence of an ignition source. GM will notify owners, and dealers will replace the fuel pump, free of charge. The recall began December 18, 2019. Owners may contact Cadillac customer service at 1-800-333-4223, Chevrolet customer service at 1-800-222-1020, or GMC customer service at 1-888-988-7267. GM's number for this recall is N192283991.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors LLC (GM) is recalling certain 2019-2020 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. The battery positive (B+) cable rings may have been manufactured with excessive glue, potentially causing an intermittent electrical connection between the B+ cable and alternator. An intermittent electrical connection between the B+ battery cable and the alternator could cause the vehicle to stall, increasing the risk of a crash. The intermittent connection could also lead to electrical arcing, which could generate sufficient heat to damage surrounding material, increasing the risk of a fire. GM will notify owners, and dealers will inspect for the presence of glue or other contamination at the B+ cable attachment to the alternator and clean the connection and reattach the B+ cable connection, as necessary. If arcing has damaged the cable, nut, or alternator, the dealer will replace the damaged components. All services will be performed free of charge. GM issued owners an interim notification on February 4, 2020. GM issued second notice and the recall began March 9, 2019. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-888-988-7267. GM's number for this recall is N192273510.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors LLC (GM) is recalling certain 2020 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles. The bolts used to attach the front and/or rear brake calipers may have not been heat treated and may break under load. Broken caliper bolts can reduce brake performance or interfere with wheel rotation and increase the risk of a crash. GM will notify owners, and dealers will replace the brake caliper bolts, free of charge. The recall began March 23, 2020. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-866-522-9559. GM's number for this recall is N202294420.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors, LLC. (GM) is recalling certain 2020 Buick Enclave, Cadillac XT5 and XT6, Chevrolet Blazer, Silverado 1500, 2500 and 3500 and Traverse and GMC Acadia and Sierra 1500, 2500 and 3500 vehicles. The diffuser component of the Roof-Rail Air Bag (RRAB) inflator may not have been properly crimped to the inflator and could separate from the inflator during air bag deployment. If the diffuser separates from the inflator during deployment, RRAB performance may be degraded, increasing the risk of injury in a crash. GM will notify owners, and dealers will replace the suspect RRAB modules, free of charge. The recall began September 3, 2020. Owners may contact Chevrolet customer service at 1-800-630-2438, Cadillac customer service at 1-800-333-4223, or Buick customer service at 1-800-521-7300. GM's number for this recall is N202305380.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors LLC (GM) is recalling certain 2019-2020 Chevrolet Silverado 1500 and GMC Sierra 1500 and 2020 Chevrolet Silverado 2500 trucks. One of the driveshaft joints may not have been properly welded, causing the driveshaft to separate while the vehicle is moving. If the driveshaft separates, there may be a loss of propulsion, increasing the risk of crash. GM will notify owners, and dealers will replace the driveshaft, free of charge. The recall is expected to begin December 2020. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-888-988-7267. GM's number for this recall is N202314870.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors LLC (GM) is recalling certain 2020 Buick Enclave, Cadillac XT5, GMC Acadia and Chevrolet Traverse vehicles and 2020-2021 Chevrolet Silverado 1500, GMC Sierra 1500 vehicles. The vehicles may have been manufactured with Continental tires that were overcured. Overcured tires may experience a carcass break in the sidewall resulting in a sudden air loss or could develop a belt edge separation which could lead to partial or full tread/belt loss. Either condition increases the risk of a crash. GM will notify owners, and dealers will inspect vehicles and replace tires that have DOT number and production mold number combinations identified by Continental, free of charge. The recall began December 17, 2020. Owners may contact GMC customer service at 1-888-988-7267, Buick customer service at 1-866-608-8080, Chevrolet customer service at 1-800-222-1020 or Cadillac customer service at 1-800-458-8006. GM's number for this recall is N202319030.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors, LLC (GM) is recalling certain 2019-2021 Chevrolet Silverado 1500 and GMC Sierra 1500, 2021 Chevrolet Suburban and Tahoe and GMC Yukon XL and 2020-2021 Chevrolet Silverado 2500 and 3500 and GMC Sierra 2500 and 3500 vehicles. The seat belt brackets may not be secured to the seat frame in the front-row center seating position. If a seat-belt bracket is not secured, the seat belt may not properly restrain an occupant in the front-row center seat position, increasing the risk of injury in a crash. GM will notify owners, and dealers will inspect left-side and right-side front-row center seat-belt bracket attachments and reassemble it correctly as necessary, free of charge. The recall began January 26, 2021. Owners may contact GMC customer service at 1-800-462-8782, Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N202314670.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors LLC (GM) is recalling certain 2020 Buick Enclave, Cadillac XT4, XT5, Escalade, Escalade ESV, Chevrolet Suburban, Tahoe, Traverse, GMC Yukon, Yukon XL, 2018-2021 Chevrolet Express, GMC Savana, 2019-2020 Chevrolet Blazer, Silverado 1500, GMC Acadia, Sierra 1500, and certain Continental tires sold to the aftermarket for various model year 2018-2021 vehicles. The affected tires were cured for too long during production. Over cured tires may develop a break in the sidewall resulting in sudden air loss or a belt edge separation which could lead to a tread/belt loss. Either condition can cause a loss of vehicle control, increasing the risk of a crash. GM will notify owners, and dealers will inspect the tires, replacing them as necessary, free of charge. The recall began March 22, 2021. Owners may contact GMC customer service at 1-888-988-7267, Buick customer service at 1-866-608-8080, Chevrolet customer service at 1-800-222-1020 or Cadillac customer service at 1-800-458-8006. GM's number for this recall is N212329050.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors (GM) is recalling certain 2019-2021 GMC Sierra 1500 and Silverado 1500 vehicles equipped with certain accessory road tires and a 17" spare tire. The 17" spare tire provided with the vehicle is not compatible for use with the accessory wheels, which can cause the anti-lock brake system (ABS) to not function properly under certain conditions. An ABS system that does not function properly can increase the risk of a crash. Dealers will provide a new 17" spare tire and wheel assembly that is compatible with the accessory wheels, free of charge. Dealers will also apply a new spare tire information label, and provide owners with an owner's manual insert clarifying which spare tire to use with the accessory road tires and with the 17" original tires. Owner notification letters were mailed February 7, 2022. Owners may contact GM customer service at 1-800-462-8782 or GMC customer service at 1-800-462-8782. GM's number for this recall is N212346510.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors, LLC (GM) is recalling certain 2020-2022 Chevrolet Silverado 1500, 2500, 3500, GMC Sierra 1500, 2500, 3500, 2021 Cadillac Escalade, Escalade ESV, Chevrolet Tahoe, Suburban, GMC Yukon, and Yukon XL vehicles equipped with diesel engines. The transmission control valve may fail and cause the rear wheels to lock-up. Rear wheel lock-up can increase the risk of a crash. Dealers will install new transmission control module software, free of charge. GM will provide a special coverage program to cover the repair of transmissions that are identified by the remedy software as containing a defective control valve. Owner notification letters were mailed December 12, 2024. Owners may contact GM customer service at 1-888-988-7267, Cadillac customer service at 1-800-458-8006, GMC customer service at GMC 1-800-462-8782 or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N242454440.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors, LLC is recalling certain 2020 Chevrolet Silverado 2500, 3500, GMC Sierra 2500, 3500, and 2020-2022 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles that may have been repaired incorrectly under recall 24V797. The transmission control valve may fail and cause the rear wheels to lock up. Rear wheel lock up increases the risk of a crash. Dealers will inspect the vehicles and update the transmission control software, free of charge. Owner notification letters were mailed March 6, 2026. Owners may contact GMC customer service at 1-800-462-8782 or Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N252516560. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on February 12, 2026.”

The records describe a problem worth checking before purchase.

“This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).”

The records describe a problem worth checking before purchase.

“This service bulletin provides information on GM Canada New Vehicle Tire Warranty Program for Original Equipment (OE) Tires and PDI installed Limited Production Option (LPO) Tires. ”

The records describe a problem worth checking before purchase.

“This service bulletin provides information about GM Accessories - Dealer-Installed, Repaired or Replaced During Warranty Coverage Period. ”

The records describe a problem worth checking before purchase.

“Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.”

The records describe a problem worth checking before purchase.

“Certain vehicles listed above, may have a condition where the transmission control valve has worn, resulting in a gradual loss of pressure within the valve. The effects can cause harsh shifting, setting a service engine soon message, reduced engine performance or P0747 diagnostic trouble code. Dealers are to install a new control valve body. The repairs will be made at no charge to the customer.”