2019 GMC Sierra 1500 inspection checklist

The records describe a possible fatal outcome.

“Engine failure at random while operating. Dealership stated vehicle blew engine block fuse and crankshaft is now seized.”

The records describe a problem worth checking before purchase.

“The contact owns a 2019 GMC Sierra 1500. The contact stated that while driving 55 MPH, the low oil pressure message was displayed. The engine oil cooler line had detached, and oil was leaking from the vehicle, causing the engine to seize. The contact associated the failure with General Motors Customer Satisfaction Program: N212326940. The vehicle was towed to the local dealer, where it was diagnosed that the engine needed to be replaced. The vehicle had not been repaired. The manufacturer was contacted and opened a claim. The failure mileage was approximately 96,182.”

The records describe a problem worth checking before purchase.

“The contact owns a 2019 GMC Sierra 1500. The contact stated that while driving at an undisclosed speed, the transmission unexpectedly hard downshifted. No warning lights were illuminated. The contact stated that the vehicle was hesitating while driving the rest of the drive. The vehicle was taken to the dealer; however, no cause for the failure was found. The dealer performed an 8-speed transmission fluid and filter replacement. The contact stated that the failure persisted. A month later, the contact stated that on a separate occasion, the transmission unexpectedly downshifted. No warning lights were illuminated. The vehicle was taken to the dealer; however, no cause for the failure was found. The contact stated that the failure persisted. The contact stated that a month later while her husband was driving on the freeway at an undisclosed speed, the engine seized and the rear-end locked and threw the driver into the steering wheel even though the seat belt was securely buckled. The contact stated that the transmission was stuck in drive(D), and the vehicle was unable to move forward. The driver shifted into reverse(R) and was able to pull off the freeway. The contact stated that the vehicle was then driven to an empty parking lot and left overnight. The vehicle was then picked up the following day and was driven to the dealer; however, no cause for the failure was found. The contact stated that the failure persisted. The manufacturer was notified of the failure. The contact hired a GMC engineer to inspect the vehicle and informed the engineer that the vehicle needed to be driven a minimum of three days and 300 miles before experiencing the failure. The contact stated that the engineer drove the vehicle for 100 miles. The contact stated that the GMC engineer and one of the employees at the dealer suggested replacing the PCM module because there was no fault code present during the failure. However, the contact was informed that there was no guarantee that replacing the PCM would fix the vehicle. The failure mileage was approximately 45,000.”

The records describe a problem worth checking before purchase.

“Loss of motive power due to engine failure The Office of Defects Investigation (ODI) has received 1,157 reports of engine bearing failure failures in the L87 6.2L engine produced by General Motors (GM). Of the 1,157 reports received, 173 are outside of the scope of recall 25V-274. These engines are installed in Model Years (MY) 2019–2024 Chevrolet Silverado 1500 and GMC Sierra 1500, and 2021-2024MY Chevrolet Suburban and Tahoe, GMC Yukon/Yukon XL, and Cadillac Escalade/Escalade ESV vehicles. The subject engine failures were investigated as part of a Preliminary Evaluation (PE25001).  GM determined that these engine failures were due to multiple supplier manufacturing and quality issues. GM issued recall 25V-274 to address the supplier manufacturing and quality issues produced between March 1, 2021, and May 31, 2024. Based on the issuance of recall 25V-274, NHTSA has closed PE25001. ODI continues to receive a significant number of reports of engine failure in vehicles outside the scope of 25V-274.  This presents a potential safety risk that warrants further investigation.  ODI is opening this Engineering Analysis (EA) to further evaluate the scope and severity of the potential problem and to fully assess the potential safety-related issues of vehicles built outside the recall scope. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.”

The records describe a possible crash, fire, injury, or loss of control.

“Loss of motive power due to engine failure On January 16, 2025, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE25001 after receiving complaints and field reports concerning engine failures in MY2019-2024 GM’s full-size truck and SUV T1XX platform equipped with the L87 6.2L V8 engine. These complainants alleged engine bearing failures resulting in knocking and growling noises from the engine’s bottom end and in some cases more severe consequences such as broken connecting rods leading to engine damage, or engine failure. If the engine fails during vehicle operation, the vehicle will lose propulsion, increasing the risk of a crash. On April 24, 2025, GM issued recall 25V-274 to address the concern with L87 engines produced between March 1, 2021, and May 31, 2024.  GM cited the root cause as a supplier manufacturing and quality issues. GM’s  recall remedy will be either an oil change to an oil with a different viscosity or engine replacement depending on the results of the remedy inspection procedure. To date, ODI has received 1,157 allegations of engine bearing failure. GM submitted 55,464 reports in total, with 29,752 unique VINs. ODI continues to receive allegations of L87 engine failures which fall outside of the scope of recall 25V-274. Based on GM’s recall, ODI will close this PE. NHTSA will continue to investigate complaints of engine failure outside the scope of recall 25V-274 as part ofEngineering Analysis (EA25007). To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors LLC (GM) is recalling certain 2019 Chevrolet Silverado 1500 Crew Cab and GMC Sierra 1500 Crew Cab vehicles. The passenger-side frontal air bag module may have been damaged during assembly, possibly resulting in the air bag not inflating properly in the event of a crash. In the event of a crash, an air bag that does not inflate properly can increase the risk of injury. GM will notify owners, and dealers will replace the passenger side air bag module, free of charge. The recall began on December 18, 2018. Owners may contact Chevrolet customer service at 1-800-222-1020 and GMC customer service at 1-800-462-8782. GM's number for this recall is N182198820.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors LLC (GM) is recalling certain 2019-2020 Chevrolet Silverado 1500 and GMC Sierra 1500, and 2020 Silverado 2500, Silverado 3500, Sierra 2500, and Sierra 3500 vehicles equipped with carpet floor covering. When the front seat belt pretensioners deploy, hot gas may vent through an opening in the pretensioner bracket, possibly igniting the carpet. A vehicle fire could result if materials ignite inside the vehicle. GM will notify owners, and dealers will close off the opening in the pretensioner bracket, free of charge. The recall began December 13, 2019. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-888-988-7267. GM's number for this recall is N192270600.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors LLC (GM) is recalling certain 2019-2020 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks. The battery positive (B+) cable rings may have been manufactured with excessive glue, potentially causing an intermittent electrical connection between the B+ cable and alternator. An intermittent electrical connection between the B+ battery cable and the alternator could cause the vehicle to stall, increasing the risk of a crash. The intermittent connection could also lead to electrical arcing, which could generate sufficient heat to damage surrounding material, increasing the risk of a fire. GM will notify owners, and dealers will inspect for the presence of glue or other contamination at the B+ cable attachment to the alternator and clean the connection and reattach the B+ cable connection, as necessary. If arcing has damaged the cable, nut, or alternator, the dealer will replace the damaged components. All services will be performed free of charge. GM issued owners an interim notification on February 4, 2020. GM issued second notice and the recall began March 9, 2019. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-888-988-7267. GM's number for this recall is N192273510.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors LLC (GM) is recalling certain 2019 Chevrolet Silverado 1500, Cadillac CT6, and GMC Sierra 1500 vehicles. Due to an Electronic Brake Control Module (EBCM) software error, the vehicle's Electronic Stability Control (ESC) and Antilock Brake System (ABS) may become disabled. Furthermore, if this specific error occurs, the vehicle's diagnostics will not illuminate the instrument cluster ESC and ABS malfunction warning lights. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control" and 135, "Light Vehicle Brake Systems." If the driver operates the vehicle unaware that ESC and ABS are not functioning, there is an increased risk of a crash. GM will notify owners, and dealers will reprogram the EBCM, free of charge. The recall began February 4, 2020. Owners may contact Chevrolet customer service at 1-800-222-1020, Cadillac customer service at 1-800-333-4223, or GMC customer service at 1-888-988-7267. GM's number for this recall is N192268090.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors LLC (GM) is recalling certain 2019 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles. These vehicles received updated software for the Electronic Brake Control Module (EBCM). This software has an error, and as a result, the vehicle's electronic brake assist may be disabled. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control" and 135, "Light Vehicle Brake Systems." A loss of electronic brake assist can increase the risk of a crash. GM will notify owners, and dealers will reprogram the EBCM, free of charge. The recall began February 24, 2020. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-888-988-7267. GM's number for this recall is N192268091.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors LLC (GM) is recalling certain 2019-2020 Chevrolet Silverado 1500 and GMC Sierra 1500 and 2020 Chevrolet Silverado 2500 trucks. One of the driveshaft joints may not have been properly welded, causing the driveshaft to separate while the vehicle is moving. If the driveshaft separates, there may be a loss of propulsion, increasing the risk of crash. GM will notify owners, and dealers will replace the driveshaft, free of charge. The recall is expected to begin December 2020. Owners may contact Chevrolet customer service at 1-800-222-1020 or GMC customer service at 1-888-988-7267. GM's number for this recall is N202314870.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors, LLC (GM) is recalling certain 2019-2021 Chevrolet Silverado 1500 and GMC Sierra 1500, 2021 Chevrolet Suburban and Tahoe and GMC Yukon XL and 2020-2021 Chevrolet Silverado 2500 and 3500 and GMC Sierra 2500 and 3500 vehicles. The seat belt brackets may not be secured to the seat frame in the front-row center seating position. If a seat-belt bracket is not secured, the seat belt may not properly restrain an occupant in the front-row center seat position, increasing the risk of injury in a crash. GM will notify owners, and dealers will inspect left-side and right-side front-row center seat-belt bracket attachments and reassemble it correctly as necessary, free of charge. The recall began January 26, 2021. Owners may contact GMC customer service at 1-800-462-8782, Chevrolet customer service at 1-800-222-1020. GM's number for this recall is N202314670.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors LLC (GM) is recalling certain 2020 Buick Enclave, Cadillac XT4, XT5, Escalade, Escalade ESV, Chevrolet Suburban, Tahoe, Traverse, GMC Yukon, Yukon XL, 2018-2021 Chevrolet Express, GMC Savana, 2019-2020 Chevrolet Blazer, Silverado 1500, GMC Acadia, Sierra 1500, and certain Continental tires sold to the aftermarket for various model year 2018-2021 vehicles. The affected tires were cured for too long during production. Over cured tires may develop a break in the sidewall resulting in sudden air loss or a belt edge separation which could lead to a tread/belt loss. Either condition can cause a loss of vehicle control, increasing the risk of a crash. GM will notify owners, and dealers will inspect the tires, replacing them as necessary, free of charge. The recall began March 22, 2021. Owners may contact GMC customer service at 1-888-988-7267, Buick customer service at 1-866-608-8080, Chevrolet customer service at 1-800-222-1020 or Cadillac customer service at 1-800-458-8006. GM's number for this recall is N212329050.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors, LLC (GM) is recalling certain 2019 Chevrolet Silverado 1500 and GMC Sierra 1500 vehicles. The affected tires were cured for too long during production. Over cured tires may develop a break in the sidewall resulting in sudden air loss or a belt edge separation which could lead to a tread/belt loss. Either condition can cause a loss of vehicle control, increasing the risk of a crash. Dealers inspect and replace the tires as necessary, free of charge, free of charge. Owner notification letters were mailed on June 25, 2021. Owners may contact Chevrolet customer service at 1-800-222-1020 and GMC customer service at 1-800-462-8782. GM's number for this recall is N212336230.”

The records describe a possible crash, fire, injury, or loss of control.

“General Motors (GM) is recalling certain 2019-2021 GMC Sierra 1500 and Silverado 1500 vehicles equipped with certain accessory road tires and a 17" spare tire. The 17" spare tire provided with the vehicle is not compatible for use with the accessory wheels, which can cause the anti-lock brake system (ABS) to not function properly under certain conditions. An ABS system that does not function properly can increase the risk of a crash. Dealers will provide a new 17" spare tire and wheel assembly that is compatible with the accessory wheels, free of charge. Dealers will also apply a new spare tire information label, and provide owners with an owner's manual insert clarifying which spare tire to use with the accessory road tires and with the 17" original tires. Owner notification letters were mailed February 7, 2022. Owners may contact GM customer service at 1-800-462-8782 or GMC customer service at 1-800-462-8782. GM's number for this recall is N212346510.”

The records describe a problem worth checking before purchase.

“This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).”

The records describe a problem worth checking before purchase.

“This service bulletin provides information on GM Canada New Vehicle Tire Warranty Program for Original Equipment (OE) Tires and PDI installed Limited Production Option (LPO) Tires. ”

The records describe a problem worth checking before purchase.

“This service bulletin provides information about GM Accessories - Dealer-Installed, Repaired or Replaced During Warranty Coverage Period. ”

The records describe a problem worth checking before purchase.

“Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.”