2018 Jeep Cherokee · keep 3 yr

The records describe a possible crash, fire, injury, or loss of control.

“while i was driving my vehicle put the parking brake on and then i was unable to get it deactivated at first, after a few seconds i got it and moved forward in traffic. after a few feet the vehicle put the parking brake on and i was unable to move once again. this was in the middle of traffic and i ended up blocking the single lane road. I called a family member who was near by and they came and some how got the parking brake off and drove me and the vehicle home. my safety and everyone one around safety was jeopardized because they had to go into oncoming traffics lane to pass me until i got moving. parking wouldn't engage when we got home and service parking brake light was on.”

The records describe a possible crash, fire, injury, or loss of control.

“When the running lights and headlights are set to Auto, moving the lever to High Beam causes the lights to go out. I have been asking the dealer and trying to find a solution since buying the car new, but no recall had been issued for my VIN and the dealer will not correct the problem with a recall specific to my VIN and year/model. There is a known issue with the Smart Lighting Module that prevents the High Beam from activating and shuts off the headlight in the Auto position, and a software update has been issued for the newer models, but not for the 2018 Cherokee with the same software.”

The records describe a possible crash, fire, injury, or loss of control.

“Back up camera turns to static when going in reverse. Has been happening for years. No warnings. Just malfunctioning. Reported this in 2019 to Jeep.”

The records describe a possible crash, fire, injury, or loss of control.

“The rear defroster or related electrical wiring in the rear glass/liftgate area appears to have malfunctioned and shorted, causing a fire while the vehicle was parked, turned off, and unattended. The fire resulted in the rear glass shattering/blowing out. The incident was recorded on a residential security camera. This posed a significant safety risk because the fire started while the vehicle was off, creating danger to occupants, bystanders, nearby vehicles, and surrounding property. There were no prior warning indicators, messages, or symptoms known before the failure. A dealership has inspected the vehicle and provided a repair estimate consistent with failure in the rear defroster/rear glass area. The vehicle and damaged components should be available for inspection. Based on the observed damage and location of the fire, this appears to be an electrical short involving the rear defroster system or related wiring.”

The records describe a possible crash, fire, injury, or loss of control.

“The contact owns a 2018 Jeep Cherokee. The contact stated that while driving at 35 MPH, the vehicle shut off as several warning lights appeared on the instrument panel. The contact made multiple attempts to restart the vehicle but to no avail. The police arrived at the scene and helped to place the vehicle into neutral(N) and moved the vehicle off to the side of the road. Due to the failure, the vehicle was initially towed to the contact's home and was then towed to a dealer. The dealer diagnosed the vehicle with a failed alternator and PTU(Power Transfer Unit). The vehicle was towed back to the contact's home due to the cost of the repair. The contact called an independent mechanic who managed to replace the alternator. Although the contact managed to drive the vehicle once the alternator was replaced; the contact stated that the same warning lights including the 4WD warning message remained on the instrument panel. Upon investigation, the contact discovered NHTSA Campaign Number: 25V011000(Power Train); however, the VIN was not included in the recall. The manufacturer had yet to be notified of the failure. The vehicle had yet to be fully repaired. The failure mileage was approximately 118,000.”

The records describe a possible crash, fire, injury, or loss of control.

“The contact owns a 2018 Jeep Cherokee. The contact received notification of NHTSA Campaign Number: 25V011000 (Power Train), and the part was listed as available at the time. The vehicle was taken to a dealer where it was diagnosed to have the PTU/full transmission failure as listed in the recall notice; however, the vehicle was not repaired due to the dealer not being able to remedy the part. The part was ordered. The contact stated while driving the vehicle at an undisclosed speed on the highway, she attempted to accelerate but no power was given. She pulled off to the side, and authorities were called for traffic control. The vehicle was unable to move. When engaging into drive, the vehicle sounded like it was coming apart. The contact stated the vehicle was not able to engage its own brake. When the vehicle was towed, there was no evidence that the wheels were locked up. Shortly after that, the vehicle's PTU became fully inoperable, causing the vehicle to not be able to be placed in park or any other driver setting. The vehicle was towed to the dealer a second time. The tow company parked the vehicle at the dealer on a hill. With a failed transmission, this caused the vehicle's E-brake to disengage, causing it to roll off the hill and stopped rolling shortly after once on flat ground. The dealer declined to perform the recall repair and prompted the contact to fix the E-brake on her own, although the failure portrayed to the recall notice. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 110,000.”

The records describe a possible crash, fire, injury, or loss of control.

“The contact owns a 2018 Jeep Cherokee. The contact stated that upon starting the vehicle, all of the warning indicators on the instrument cluster panel illuminated. Additionally, the contact noted that the parking brake occasionally felt as though it had not engaged, and while driving, the parking brake would disengage on its own. The contact also stated that the vehicle hesitated during acceleration and failed to shift smoothly into the next gear. The contact referenced NHTSA ID Number: 25V011000 (Power Train) to be the cause of the issue however, the VIN was not included in the recall repair. The dealer was not notified of the failure. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 99,000.”

The records describe a possible crash, fire, injury, or loss of control.

“PTU failed. Service 4 WD Light is on. Jeep has a recall but my VIN isn't included. It is going to cost over $3000 to get it fixed.”

The records describe a possible crash, fire, injury, or loss of control.

“I am filing a safety complaint regarding Safety Recall 01C (NHTSA 25V-011) and the handling of my vehicle by both the dealership and Stellantis. My vehicle exhibited fault codes and conditions consistent with the defect described in Recall 01C, including: DTC C1477-4B (Transfer Case Clutch Over Temperature) DTC C1440-64 (Transfer Case Clutch Pressure Sensor) Documented drivetrain control module failure status (“TestFailed: True”) Excessive clutch temperature readings exceeding 400°F These are consistent with PTU-related failure conditions the recall is intended to detect and address. Despite this, the dealership concluded that the PTU was not the cause and instead replaced the rear differential. I repeatedly requested written documentation explaining how the PTU was ruled out and how the rear differential was determined to be the root cause. This was not clearly provided. Additionally, the recall remained marked as “incomplete” for over a month while the vehicle was in the dealership’s possession. Immediately after I escalated the issue to corporate, the recall was suddenly marked “complete,” without clear explanation or supporting documentation. I was also not clearly informed that the Drivetrain Control Module (DTCM) had been replaced. I do not know: When the DTCM was replaced relative to testing Whether recall testing was performed with a faulty DTCM Whether the new DTCM was properly updated under Recall 01C Whether testing was repeated after replacement If recall validation was performed using a faulty DTCM, this raises concerns that the PTU testing procedure may have been invalid. The vehicle remained at the dealership for nearly two months during this process. Throughout this time, I experienced significant difficulty obtaining clear answers, and my concerns were not fully addressed before the recall was marked complete. I am concerned that: The recall may have been improperly executed or validated”

The records describe a possible crash, fire, injury, or loss of control.

“The contact owns a 2018 Jeep Cherokee. The contact stated that while driving at an undisclosed speed, the 4WD warning light illuminated, rendering the 4WD inoperable. The vehicle automatically switched to the Rear Wheel Drive mode. The vehicle was taken to both an independent mechanic and the dealer, who determined that the PTU had failed and needed to be replaced, but the part was on backorder. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 25V011000 (Power Train); however, the VIN was not included in the recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 110,000.”

The records describe a possible crash, fire, injury, or loss of control.

“The contact owns a 2018 Jeep Cherokee. The contact stated that while driving at an undisclosed speed, the vehicle failed to shift properly when the accelerator was applied. The contact was unaware of any warning lights illuminated at the time of the failure. The vehicle was taken to the dealer, where it was diagnosed that the power transfer unit and drivetrain had failed and needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure, and a reimbursement case was opened. The failure mileage was approximately 99,477.”

The records describe a possible crash, fire, injury, or loss of control.

“While driving, often at highway speeds, all of the lights on the shifter will light up and the dash will display "Service Transmission." I took it to the dealer several times and their response has been that it is a software issue that they do not have a fix for and that I should stop the car, turn the engine off, open and close the door and then restart the car. This does temporarily reset the display but doing this on the highway poses a safety problem in trying to get to the shoulder in traffic.”

The records describe a possible crash, fire, injury, or loss of control.

“The PTU has failed and caused damage to splines. This failure caused the engine light to come on intermittently and failure to shift. The problem has been confirmed by a dealership where the car is and has been sitting for repair for almost a year due to no repair parts available from Jeep.”

The records describe a possible crash, fire, injury, or loss of control.

“What component or system failed or malfunctioned, and is it available for inspection upon request? The Power Transfer Unit (PTU) has malfunctioned. Specifically, the Drivetrain Control Module (DTCM) is reporting a "TestFailed" status with active fault codes C1440-64 (Transfer Case Clutch Pressure Sensor) and C1477-4B (Transfer Case Clutch - Over Temperature). The vehicle and its diagnostic logs are available for inspection. How was your safety or the safety of others put at risk? The failure creates a risk of sudden loss of motive power while driving or a loss of the PARK function when stationary, both of which can lead to a collision. Furthermore, internal diagnostic data has recorded clutch plate temperatures as high as 437.1°F. This extreme thermal condition represents a significant fire hazard and the potential for mechanical seizure while the vehicle is in motion. Has the problem been reproduced or confirmed by a dealer or independent service center? Yes. The problem was confirmed by Larry H. Miller Casa Chrysler Jeep after the 01C recall software was installed, which subsequently triggered the "TestFailed" status. Additionally, an independent inspection by Universal Transmission confirmed the specific PTU fault codes and verified that the overheating issue is originating from the PTU. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? The vehicle has been inspected by a manufacturer-authorized dealership (Larry H. Miller Casa Chrysler Jeep) and an independent service center (Universal Transmission). Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? Yes, the vehicle displayed "4WD Overheating," "Temp Unavailable," and "Service 4WD" warning lamps and messages. These symptoms were formally documented in technical scan reports beginning in early March 2026.”

The records describe a possible crash, fire, injury, or loss of control.

“I took [XXX] into to Auffenburg of IL for the recall. They told me the code the car is throwing is not the recall code, but that it is a failure of the PTU, which is the recalled part. I have tried since March 2nd to get straight answers from Stellantis (Case number XXX jeep Cherokee, case manager [XXX] ). But This promise to get back with me has been going on for over a month with no real movement. Stellantis [XXX] Derek XXX Ashley Mansker (Who is leaving CDJR to work for their VW dealership) Copy of the letter sent from Ashley to me: Customer brought vehicle in for the Safety Recall 01C-2 Speed PTU Failure to be completed. While technician was attempting to complete the recall, the vehicle failed to finish the wiTech Routine. Vehicle would not shift into 4 High. Vehicle has a code in system as C14A7-97 - PTU Motor Component Or System Operation Obstructed Or Blocked. Would need to diagnose the current code, before continuing the Recall. Since vehicle will not finish the wiTECH routine, We can not complete recall. After routine is completed, there is two outcomes. Check for DTC C1494-07 (PTU Fork). ➢ If C1494-07 is set, replace the PTU. ➢ If no code C1494-07 is set, return the vehicle to the customer. Unfortunately, Without vehicle completing the recall, we can not replace PTU under recall. Except of call with Stellantis: February 27th. Now um the revision was not out yet. Uh, it was released March 18th. So on March 18th, it was a while. Yeah. If the vehicle arrives at the dealership with a PTU and uh dealership diagnosed and recommends that the PTU needed to be replaced 1st prior to doing the software update, it will be covered. It's on the revision. Okay. Okay, so I just want to make sure everything is clear and straightened out, so Colleen, don't worry anymore. We guarantee and assure you that your PT will be replaced for free, INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)”

The records describe a possible crash, fire, injury, or loss of control.

“My power train unit warning light is on. I took it to a independent licensed auto mechanic that stated there are is a open recall on this vehicle for this part. I have went to the Jeep Dealership and was told to call jeep directly. After numerous calls Jeep denies there is a open recall on this part and refuses to repair this part on the recall and I will have to pay the entire cost of repair. I also researched a Safety Recall number W47, NHTSA number 20V-343PYU Input Spine. There is also NHTSA campaign number 25V)1 1000 and a Jeep recall number is 01C.”

The records describe a possible fatal outcome.

“Desiccated Air Bag Inflator Rupture From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.”

The records describe a possible crash, fire, injury, or loss of control.

“Chrysler (FCA US LLC) is recalling certain 2017-2018 Jeep Cherokee vehicles. The tire and rim size information required to be on the Certification label was omitted during manufacturing, which may result in an incorrect tire and rim combination being installed on the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims." The missing tire and rim designation information may lead to an incorrect combination being installed on the vehicle, increasing the risk of a crash. Chrysler will notify owners and will provide a corrected certification label, free of charge. The recall began October 13, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T53.”

The records describe a possible crash, fire, injury, or loss of control.

“Chrysler (FCA US LLC) is recalling certain 2018 Jeep Cherokee and Compass vehicles equipped with 2.4L engines. The engines may have a cracked oil pump housing that can result in oil pump failure. If the oil pump fails, the engine will stall, increasing the risk of a crash. Chrysler will notify owners, and dealers will inspect the oil pump, replacing it as necessary, free of charge. The recall began December 5, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T65.”

The records describe a possible crash, fire, injury, or loss of control.

“Chrysler (FCA US LLC) is recalling certain 2018 Jeep Cherokee vehicles equipped with a 2.4L engine. These vehicles may have been manufactured with a fuel tube that may leak fuel into the engine compartment. A fuel leak in the presence of the ignition source can increase the risk of a fire. Chrysler will notify owners, and dealers will inspect the fuel tube, replacing it as necessary, free of charge. The recall began May 24, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U39.”

The records describe a possible crash, fire, injury, or loss of control.

“Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb), 2017-2018 Chrysler Pacifica and 2018 Jeep Wrangler vehicles. These vehicles are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short circuit within the vehicle's wiring, the driver may not be able to shut off the cruise control either by depressing the brake pedal or manually turning the system off once it has been engaged, resulting in either the vehicle maintaining its current speed or possibly accelerating. If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash. Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.”

The records describe a possible crash, fire, injury, or loss of control.

“Chrysler (FCA US LLC) is recalling certain 2018 Jeep Cherokee all-wheel-drive vehicles. The bearing cage for the right front halfshaft assembly may not have been properly heat treated, possibly resulting in the bearing cage breaking and a potential halfshaft assembly failure. If the halfshaft bearing cage breaks, the halfshaft may not be able to transmit engine power, causing a loss of drive or it can allow the vehicle to move while in the "Park" position. Either condition may increase the risk of a crash. Chrysler will notify owners, and dealers will replace the front right halfshaft assemblies, free of charge. The recall began September 20, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U78.”

The records describe a possible crash, fire, injury, or loss of control.

“Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid vehicles. The powertrain control module may be equipped with a voltage regulator chip in the circuit board that may fail, causing a stall or a no start condition. A vehicle stall can increase the risk of a crash. Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.”

The records describe a possible crash, fire, injury, or loss of control.

“Chrysler (FCA US, LLC) is recalling certain 2017-2019 Jeep Cherokee vehicles. The power transfer unit (PTU) may become damaged and disengage the transmission and differential, resulting in a loss of drive power and/or loss of park function. A loss of drive power can increase the risk of a crash. A loss of park function can cause an unintended vehicle rollaway, which can increase the risk of a crash or injury. Dealers will update the drivetrain control module and PTU software and replace the PTU, as necessary free of charge. Owner notification letters were mailed beginning February 19, 2026. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 01C.”

The records describe a problem worth checking before purchase.

“2.4L Excessive Oil Consumption XB1 Warranty Extension The customer may describe one or more of the following: Oil pressure low indicator lamp illumination between oil changes. Excessive oil consumption. This bulletin involves performing an oil consumption verification test and possibly replacing the long block.”

The records describe a problem worth checking before purchase.

“2.4L Excessive Oil Consumption XB1 Warranty Extension The customer may describe one or more of the following: Oil pressure low indicator lamp illumination between oil changes. Excessive oil consumption. This bulletin involves performing an oil consumption verification test and possibly replacing the long block.”

The records describe a problem worth checking before purchase.

“2.4L Excessive Oil Consumption XB1 Warranty Extension The customer may describe one or more of the following: Oil pressure low indicator lamp illumination between oil changes. Excessive oil consumption. This bulletin involves performing an oil consumption verification test and possibly replacing the long block.”

The records describe a problem worth checking before purchase.

“2.4L Excessive Oil Consumption XB1 Warranty Extension The customer may describe one or more of the following: ? Oil pressure low indicator lamp illumination between oil changes. ? Excessive oil consumption. This bulletin involves performing an oil consumption verification test and possibly replacing the long block.”

The records describe a problem worth checking before purchase.

“2.4L Excessive Oil Consumption XB1 Warranty Extension The customer may describe one or more of the following: ? Oil pressure low indicator lamp illumination between oil changes. ? Excessive oil consumption. This bulletin involves performing an oil consumption verification test and possibly replacing the long block.”

The records describe a problem worth checking before purchase.

“2.4L Excessive Oil Consumption XB1 Warranty Extension The customer may describe one or more of the following: ? Oil pressure low indicator lamp illumination between oil changes. ? Excessive oil consumption. This bulletin involves performing an oil consumption verification test and possibly replacing the long block.”

The records describe a problem worth checking before purchase.

“"2.4L Excessive Oil Consumption XB1 Warranty Extension The customer may describe one or more of the following: ● Oil pressure low indicator lamp illumination between oil changes. ● Excessive oil consumption. This bulletin involves performing an oil consumption verification test and possibly replacing the long block." ”

The records describe a problem worth checking before purchase.

“"2.4L Excessive Oil Consumption XB1 Warranty Extension The customer may describe one or more of the following: ● Oil pressure low indicator lamp illumination between oil changes. ● Excessive oil consumption. This bulletin involves performing an oil consumption verification test and possibly replacing the long block." ”

The records describe a problem worth checking before purchase.

“"2.4L Excessive Oil Consumption XB1 Warranty Extension The customer may describe one or more of the following: ● Oil pressure low indicator lamp illumination between oil changes. ● Excessive oil consumption. This bulletin involves performing an oil consumption verification test and possibly replacing the long block." ”

The records describe a problem worth checking before purchase.

“D-26-10 (XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL)”

The records describe a problem worth checking before purchase.

“D-26-10 (XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL)”

The records describe a problem worth checking before purchase.

“D-26-10 (XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL)”

The records describe a problem worth checking before purchase.

“ID-26-19 (XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL)”

The records describe a problem worth checking before purchase.

“ID-26-19 (XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL)”

The records describe a problem worth checking before purchase.

“ID-26-19 (XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL)”

The records describe a problem worth checking before purchase.

“(XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL)”

The records describe a problem worth checking before purchase.

“(XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL)”

The records describe a problem worth checking before purchase.

“(XX1) Two Speed Power Transfer Unit (PTU) - Select 2017 - 2019 Jeep Cherokee (KL)”